Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

Reliability Analysis of Slab Transfer Equipment in Hot Rolling Furnace

열간압연 가열로 슬라브 이송장치 신뢰도 해석

  • Bae, Young-Hwan (Department of Mechanical Education, Andong National University)
  • 배용환 (안동대학교 기계교육학과)
  • Published : 2006.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The development of automatic production systems have required intelligent diagnostic and monitoring functions to overcome system failure and reduce production loss by the failure. In order to perform accurate operations of the intelligent system, implication about total system failure and fault analysis due to each mechanical component failures are required. Also solutions for repair and maintenance can be suggested from these analysis results. As an essential component of a mechanical system, a bearing system is investigated to define the failure behavior. The bearing failure is caused by lubricant system failure, metallurgical deficiency, mechanical condition(vibration, overloading, misalignment) and environmental effects. This study described slab transfer equipment fault train due to stress variation and metallurgical deficiency from lubricant failure by using FTA.

Keywords

References

  1. Bhushan, M., Rengaswamy, R., 'Design of sensor network based on the signed directed graph of the process for efficient fault diagnosis', Industrial and Engineering Chemistry Research, Vol. 39, No. 4, pp. 999-1019, 2000 https://doi.org/10.1021/ie990383d
  2. Lou, S. J., Budman, H., Duever, T. A., 'Comparison of fault detection technique', Journal of Process Control, Vol. 13, No. 5, pp. 451-464, 2003 https://doi.org/10.1016/S0959-1524(02)00069-0
  3. Scattoloni, R., 'Fault identification: An approach based on propagation digraph', International Journal of Systems Science, Vol. 31, No. 11, pp. 1489-1496, 2000 https://doi.org/10.1080/00207720050197857
  4. Bhushan, M., Rengaswamy, R., 'Design of sensor location based on various fault diagnostic observability and reliability criteria', Computers and Chemical Engineering, Vol. 24, No. 2, pp. 735-741, 2000 https://doi.org/10.1016/S0098-1354(00)00331-8
  5. Basseville, M., Benveniste, A., 'Diagnosing hybrid dynamical systems: Fault graphs, statistical residuals and Viterbi algorithm', Proceedings of the IEEE Conference on Decision and Control, Vol. 4, pp. 3757-3762, 1998
  6. Sehgal, R., Gandhi, O. P., Angra, S., 'Fault location of tribo-mechanical systems graph theory and matrix approach', Reliability Engineering & System Safety, Vol. 70, No. 1, pp. 1-14, 2000 https://doi.org/10.1016/S0951-8320(00)00021-1
  7. Mo, K. J., Oh, Y. S., Yoon, E. S., 'Development of operation-aided system for chemical processes', Expert Systems with Applications, Vol. 12, No. 4, pp. 455-464, 1997 https://doi.org/10.1016/S0957-4174(97)00005-5
  8. Yang, S. K., Liu, T. S., 'Failure analysis for an airbag inflator by Petri net', Quality and Reliability Engineering International, Vol. 13, No. 3, pp. 139-151, 1997 https://doi.org/10.1002/(SICI)1099-1638(199705)13:3<139::AID-QRE91>3.0.CO;2-P
  9. 이근철, FTA안전공학, 기전연구사, pp. 39-67, 1990
  10. Baron, J. H., Nunez, J. E., Rivera, S. S., 'Riskoriented safety evaluation of the CAREM-25 prototype reactor', Nuclear Technology, Vol. 134, No. 2, pp. 97-109, 2001 https://doi.org/10.13182/NT01-A3189
  11. Fussell, J. B., 'Reliability of sequential systems using the cause-consequence diagram method', Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 215, No. 3, pp. 207-220, 2001 https://doi.org/10.1243/0954408011530451
  12. 한국 GMB 베어링 주식회사, 기술카타로그, pp. 100-112, 1992
  13. 日本精工株式會社, 'F1감속기 베어링 파손보고서', 1990
  14. McNiff, B. P., Errichello, R. L., 'New guidelines promise reliable wind-turbine gearboxes', Power Transmission Design, Vol. 39, No. 3, pp. 21-24, 1997
  15. 日本潤滑學會, 潤滑故障例とその對策, 養賢堂, pp.23-46, 1978
  16. Mayo, P. A., 'Designing reliability into industrial gear drive', Gear Technology, Vol. 15, No. 5, pp.8, 1998
  17. 한국GMB 베어링, '기술카타로그', Korea GMB Industry Co., LTD. Bearing Division, pp. 15-19, 1993