DOI QR코드

DOI QR Code

Investigation of Resonant Wavelength Separation in Microband-induced Fiber Gratings

  • Sohn Kyung-Rak (Division of Radio and Information Communication Engineering, Korea Maritime University) ;
  • Shim Joon-Hwan (Division of Radio and Information Communication Engineering, Korea Maritime University) ;
  • Kim Kwang-Taek (Department of Optoelectronics Engineering, Homan University)
  • Received : 2006.04.07
  • Published : 2006.06.01

Abstract

In microband-induced fiber gratings, polarization properties and birefringence are investigated as a function of an applied line force. With the transmission curves associated with the maximum and minimum resonant wavelengths, the polarization-dependent behaviors are analyzed. By increasing the transverse line force, the resonance wavelength for an incident light polarized to the same direction of the force is blue-shifted as much as 0.69 nm/(N/cm) while that for the other polarization is insensitive. Using the resonant wavelength separation corresponding to the force variation, the transverse effective index change or modal birefringence variation is obtained. The ratio of modal birefringence versus applied line force is ${\Delta}B/{\Delta}f_x={\sim}8.38{\times}10^{-7}$.

Keywords

References

  1. J. K. Bae, S. H. Kim, J. H. Kim, J. Bae, S. S. Lee, and J-M. Jeong, 'Spectral shape tunable band-rejection filter using a long period fiber grating with divided coil heaters,' IEEE Photon. Technol. Lett., vol. 15, pp. 407-409, 2003 https://doi.org/10.1109/LPT.2002.807955
  2. J-R Lee and Hiroshi Tsuda, 'Fiber optic liquid leak detection technique with an ultrasonic actuator and a fiber bragg grating,' Opt. Lett., vol. 30, pp. 3293-3295, 2005 https://doi.org/10.1364/OL.30.003293
  3. K. R. Sohn and K. T. Kim, 'Thermo-optically tunable band-rejection filters using mechanically formed long-period fiber gratings,' Opt. Lett., vol. 30, pp. 2688-2690, 2005 https://doi.org/10.1364/OL.30.002688
  4. S. T. Oh, W. T. Han, U. C. Paek, and Y. Chung, 'Reduction of birefringence and polarization-dependent loss of long-period fiber gratings fabricated with a KrF excimer laser.' Opt. Express, vol. 11, pp. 3087-3092, 2003 https://doi.org/10.1364/OE.11.003087
  5. O. V. Ivanov, 'Wavelength shift and split of cladding mode resonances in microband long-period fiber gratings under torsion,' Opt. Comm., 232, pp. 159-166, 2004 https://doi.org/10.1016/j.optcom.2003.12.058
  6. B. H. Lee, J. Cheong, and U-C. Paek, 'Spectral polarization-dependent loss of cascaded long-period fiber gratings,' Opt. Lett., vol. 27, pp. 1096-1098, 2002 https://doi.org/10.1364/OL.27.001096
  7. B. L. Bachim and T. K. Gaylord, 'Polarization-dependent loss and birefringence in long-period fiber gratings,' Appl. Opt., vol. 42, pp. 6816-6823, 2003 https://doi.org/10.1364/AO.42.006816
  8. J. Y. Cho, J. H. Lim, and K. S. Lee, 'Optical fiber twist sensor with two orthogonally oriented mechanically induced long-period grating sensors,' IEEE Photon. Technol. Lett., vol. 17, pp. 453-455, 2005 https://doi.org/10.1109/LPT.2004.840073
  9. A. M. Smith, 'Single-mode fiber pressure sensitivity,' Electron. Lett., vol. 16, pp. 773-774, 1980 https://doi.org/10.1049/el:19800548
  10. S. Savin, M. J. F. Digonnet, G. S. Kino, and H. J. Show, 'Tunable mechanically induced long-period fiber gratings,' Opt. Lett., vol. 25, pp. 710-712, 2000 https://doi.org/10.1364/OL.25.000710

Cited by

  1. Mask-free hybrid long-period fiber grating fabrication by self-assembled periodic polymerization in silica hollow optical fiber vol.34, pp.18, 2009, https://doi.org/10.1364/OL.34.002745
  2. Mechanically formed loss-tunable long-period fiber gratings realized on the periodic arrayed metal wires vol.278, pp.1, 2007, https://doi.org/10.1016/j.optcom.2007.06.021