참고문헌
- Kong, A. C., Wiggers, J. and Harrison, P., 2005, 'Modeling the Effect of Blank-Holder Pressure and Material Variability on Forming of Textile Perform,' Proceedings on ESAFORM, Vol. 2, pp.939-946
- Hancock, S. G and Potter, K. D., 2005, 'Toward Real Time Manipulation of Virtual Fabric Reinforcement-Extending and Enhancing Kinematic Drape Simulation Tools,' Proceedings on ESAFORM, Vol. 2, pp.959-966
- Chang, S. H., Sutcliffe, M. P. F. and Sharma, S.B., 2004, 'Microscopic Investigation of Tow Geometry Changes in a Woven Prepreg Material During ?Draping and Consolidation,' Composites Science and Technology, Vol. 64, pp. 1701-1707 https://doi.org/10.1016/j.compscitech.2004.01.004
- Chang, S. H., Sharma, S.B. and Sutcliffe, M. P. F., 2003, 'Microscopic Investigation of Tow Deformation of a Dry Satin Weave Fabric During Draping,' Composites Science and Technology, Vol. 63, pp. 99-111 https://doi.org/10.1016/S0266-3538(02)00180-X
- Zhao, R., Zhou, X. and Dai, G, 2002, 'Effect of the Microstructure of GMT on Its Mechanical Properties,' Polymer Composites, Vol. 23, pp. 1026-1035 https://doi.org/10.1002/pc.10498
- Byun, J-H., 1997, 'Prediction of Engineering constants for Plain and 8-Harness Satin Woven Composites,' Trans. of KSME, A, Vol. 26, No. 11, pp. 1757-1764
- Sharma, S. B. and Sutcliffe, M. P. F., 2003, 'Characterisation of Material Properties for Draping of Dry Woven Composite Material,' Composites, Part A: Applied Science and Manufacturing, Vol. 34, pp. 1167-1175 https://doi.org/10.1016/j.compositesa.2003.09.001
- van West, B. P., Pipes, R. B. and Advani, S. G, 1991, 'The Consolidation of Commingled Thermoplastic Fabrics,' Polymer Composites, Vol. 12, pp. 417-427 https://doi.org/10.1002/pc.750120607
- Robertson, R. E., Hsiue, E. S., Sickafus, E. N. and Yeh, G S. Y., 1981, 'Fiber Rearrangements During the Molding of Continuous Fiber Composites. I. Flat Cloth to a Hemisphere,' Polymer Composites, Vol. 2, pp.126-131 https://doi.org/10.1002/pc.750020309
- Chang, S. H. and Cheon, S. S., 2005, 'FE Modeling of Micro-Deformation of Carbon Fabric-Metallic Foam Sandwich Structures,' Proceedings on ESAFORM, Vol. 2, pp. 983-986
- ASTM D 1621, 'Standard Test Method for Compressive Properties of Rigid Cellular Plastics.'
- Gibson, L. J. and Ashby, M. F., 1997, Cellular solids, 2nd ed., Cambridge university press, Cambridge, p. 193
- Divinycell Technical manual (HT grade)
- Chang, S. H., 2004, 'Changes in Micro Tow Geometry of Plain Weave Carbon Fabrics Composing Foam-Composite Sandwich Beam During Forming,' Composites Science and Technology, submitted