대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제30권7호
  • /
  • Pages.765-772
  • /
  • 2006
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

등통로각압축 공정에서 금형의 단면형상이 공정에 미치는 영향

Effects of Sectional Shape of Die During ECAP Process

  • 고성광 (고려대학교 대학원 기계공학과) ;
  • 김성용 (고려대학교 대학원 기계공학과) ;
  • 권숙인 (고려대학교 금속공학과) ;
  • 김명호 (인하대학교 금속공학과) ;
  • 황선근 (인하대학교 금속공학과) ;
  • 채수원 (고려대학교 기계공학과)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Much research efforts have been made on the equal channel angular pressing (ECAP) which produces ultra-fine grains. Along with the experiments, the finite element method has been widely employed to investigate the deformation behavior of specimen during ECAP and the effect of process parameters of ECAP. In this paper, sectional shape change has been investigated during ECAP with the pure-Zr, Zr-702 by using three-dimensional finite element analysis. The results have been compared with experimental results.

키워드

참고문헌

  1. Segal, V. M., Rezenikov, V. I., Drobyshevskiy, A. E., Kopylov, V. I., 1981, 'Plastic Working of Metals by Simple shear,' Metally(Eng. Trans : Russian Metallurgy), Vol. 1, pp. 99-105
  2. Iwahashi, Y., Wang, J., Horita, Z., Nemoto, M. and Langdon, T. G, 1996, 'Principle of Equal-Channel Angular Pressing of the Processing of Ultra-Fine Grained Metals,' Scripta Mater., Vol. 35, No. 2, pp. 143-146 https://doi.org/10.1016/1359-6462(96)00107-8
  3. Prangnell, P. B., Harris, C. and Roberts, S. M., 1997, 'Finite Element Modeling of Equal Channel Angular Extrusion,' Scripta Mater., Vol. 37, No. 7, pp. 983-989 https://doi.org/10.1016/S1359-6462(97)00192-9
  4. Bowen, J. R., Gholinia, A., Roberts, S. M., Prangnell, P. B., 2000, 'Analysis of the Billet Deformation Behavior in Equal Channel Angular Extrusion,' Mater. Sci. & Eng., Vol(a). 287, pp. 87-99 https://doi.org/10.1016/S0921-5093(00)00834-0
  5. Kwon, G H., Chae, S. W., Kwun, S. I., Kim, M. H., Hwang, S. K., 2001, 'Frictional Effects on the Deformation Behavior of Materials and Die during Equal Channel Angular Pressing(ECAP) with Pure-Zr,' J. of the KSPE, Vol. 18, No. 6, pp. 182-187
  6. Bae, G H., Kwon, G H., Chae, S. W., Kwun, S. I., Kim, M. H., Hwang, S. K., 2002, 'Finite Element Analysis of Deformation Behavior due to Material Properties during Equal Channel Angular Pressing,' J. of the KSPE, Vol. 19, No. 8, pp. 187-193
  7. Kim, H. S., 2001, 'Finite Element Analysis of Equal Channel Angular Pressing Using a Round Corner Die,' Mater. Sci. & Eng., A415, pp. 122-128 https://doi.org/10.1016/S0921-5093(01)01188-1
  8. Yu, S. H., Chun, Y. B., Cao, W. Q., Kim, M. H., Chae, S. W., Shin, D. H. and Hwang, S. K., 2005, 'Comparison of Equal Channel Angular Pressing and Cold Rolling in the Evolution of Microstructure and Texture in Zirconiurn,' J. Metals and Materials International, Vol. 11, No. 2, pp 101-112 https://doi.org/10.1007/BF03027453