References
- Sasaki, T. and Breugelmans, F., 1998, 'Comparison of Sweep and Dihedral Effects on Compressor Cascade Performance,' ASME Journal of Turbomachinery, Vol. 120, pp. 454-464 https://doi.org/10.1115/1.2841738
- Wadia, A. R., Szucs, P. N. and Crall, D. W., 1998, 'Inner Workings of Aerodynamics Sweep,' ASME Journal of Turbo machinery, Vol. 120, pp. 671-682 https://doi.org/10.1115/1.2841776
- Gallimore, S. J., Bolger, J. J., Cumpsty, N. A., Taylor, M. J., Wright, P. I. and Place J. M. M., 2002, 'The Use of Sweep and Dihedral in Multistage Axial Flow Compressor Blading-Part I: University Research and Methods Development,' ASME Journal of Turbomachinery, Vol. 124, pp. 521-532 https://doi.org/10.1115/1.1507333
- Denton, J. D. and Xu, L., 2002, 'The Effects of Lean and Sweep on Transonic Fan Performance,' Proceedings of ASME TURBO EXPO, GT-2002-30327
- Vad, J. and Kwedikh, A. R. A., 2004, 'Influence of Blade Sweep on the Energetic Behavior of Axial Flow Turbomachinery Rotors at Design Flow Rate,' ASME Turbo Expo 2004, GT2004-53544
- Xu, C. and Amano, R. S., 2004, 'Numerical Prediction of Swept Blade Aerodynamic Effects,' Proceedings of ASME TURBO EXPO, GT2004-53008
- Lee, S. Y. and Kim, K. Y., 2000, 'Design Optimization of Axial Flow Compressor Blades with Three-Dimensional Navier-Stokes Solver,' KSME International Journal, Vol. 14, No.9, pp. 1005-1012 https://doi.org/10.1007/BF03185803
- Ahn, C. S. and Kim, K. Y., 2003, 'Aerodynamic Design Optimization of an Axial Flow Compressor Rotor,' Proceedings of The Institution of Mechanical Engineers, Part A-of Power and Energy, Vol. 217, No. 2, pp.179-184 https://doi.org/10.1243/09576500360611209
- Myers, R. H. and Montgomery, D. C., 1995, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley & Sons, New York
- CFX-5.7 Solver Theory, Ansys Inc., 2005
- Box, M. J. and Draper, N. R., 1971, 'Fractional Designs, the XTX Criterion, and Some Related Matters,' Technometrics, Vol. 13, No. 4, pp. 731-742 https://doi.org/10.2307/1266950
- Venter, G, Haftka, R. T. and Starnes, J. H. Jr., 1996, 'Construction of Response Surfaces for Design Optimization Applications,' AIAA 96-4040-CP
- Guinta, A. A., 1997, 'Aircraft Multidisciplinary Design Optimization Using Design of Experimental Theory and Response Surface Modeling Methods,' Ph. D. Thesis, Department of Aerospace Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA
- Choon-Man Chang and Kwang-Yong Kim, 2003, 'Flow Measurements and Performance Analysis using a 5-Hole Pitot Tube and a Rotating Hot-Wire Probe in an Axial Flow Fan,' Transactions of the Korean Society of Mechanical Engineers B, Vol. 27, No. 12, pp. 1750-1757 https://doi.org/10.3795/KSME-B.2003.27.12.1750
Cited by
- A Numerical Study on the Performance Characteristics of a Partial Admission Axial Supersonic Turbine with Swept Rotor Blades vol.17, pp.3, 2013, https://doi.org/10.6108/KSPE.2013.17.3.001
- Blade Optimization of a Transonic Compressor Using a Multiple Surrogate Model vol.32, pp.4, 2008, https://doi.org/10.3795/KSME-B.2008.32.4.317