Journal of Mechanical Science and Technology

  • 제20권7호
  • /
  • Pages.1019-1029
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

A Theoretical Study for the Design of a New Ballistic Range

  • Rajesh G. (School of Mechanical Engineering, Andong National University) ;
  • Lee J.M. (Angang Plant, Poongsan Co.) ;
  • Back S.C. (Digital Appliance Company, LG Electronics Inc.) ;
  • Kim Heuy-Dong (School of Mechanical Engineering, Andong National University)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The ballistic range has long been employed in a variety of engineering fields such as high-velocity impact engineering, projectile aerodynamics, creation of new materials, etc, since it can create an extremely high-pressure state in very short time. Of many different types of ballistic ranges developed to date, two-stage light gas gun is being employed most extensively. In the present study, a theoretical work has been made to develop a new type of ballistic range which can easily simulate a flying projectile. The present ballistic range consists of high-pressure tube, piston, pump tube, shock tube and launch tube. The effect of adding a shock tube in between the pump tube and launch tube is investigated. This improvement is identified as the reduction in pressures in the high pressure tube and pump tube while maintaining the projectile velocity. Equations of motions of piston and projectile are solved using Runge-Kutta methods. Dependence of projectile velocity on various design factors such as high pressure tube pressure, piston mass, projectile mass, area ratio of pump tube to launch tube and type of driver gas in the pump tube are also analyzed. Effect of various gas combinations is also investigated. Calculations show that projectile velocities of the order 8 km/sec could be achieved with the present ballistic range.

키워드

참고문헌

  1. Bogdanoff, D. W. and Miller, R. J., 1995, 'Improving the Performance of Two Stage Light Gas Guns by Adding a Diaphragm in the Pump Tube,' Intl. J. Impact Engineering, Vol. 17, pp. 81-92 https://doi.org/10.1016/0734-743X(95)99837-H
  2. Bogdonoff, D. W., 1997, 'Optimization Study of The Ames 0.5 Two-Stage Light Gas Gun,' Intl. J. Impact Engineering, Vol. 20, pp. 131-142 https://doi.org/10.1016/S0734-743X(97)87487-8
  3. Charters, A. C., 1987, 'Development of High-Velocity Gas-Dynamics Gun,' Intl. J. Impact Engineering, Vol. 5, pp. 183-207 https://doi.org/10.1016/0734-743X(87)90038-8
  4. Charters, A. C., 1995, 'The Early Years of Aerodynamic Ranges, Light-Gas Guns, and High Velocity Impact,' Intl. J. Impact Engineering, Vol. 17, pp. 151-182 https://doi.org/10.1016/0734-743X(95)99844-H
  5. Chhabildas, L. C., Kmetyk, L. N., Reinhart, W. D. and Hall, C. A., 1995, ' Enhanced Hypervelocity Launcher - Capabilities to 16 Km/s,' Intl. J. Impact Engineering, Vol. 17, pp. 183-194 https://doi.org/10.1016/0734-743X(95)99845-I
  6. Doolan, C. J. and Morgan, R. G., 1999, 'A Two-Stage Free-Piston Driver,' Shock Waves, Vol. 9, pp.239-248 https://doi.org/10.1007/s001930050161
  7. Doolan, C., 2001, 'A Two Stage Light Gas Gun for the Study of High Speed Impact in Propellants,' DSTO Report, DSTO-TR-1092
  8. Glass, I. I. and Sislian, J. P., 1994, 'Nonstationary Flows and Shock Waves,' Oxford Science Publications, Oxford, pp. 100-125
  9. Lewis, A. G., 1990, 'Design Limitations on Ultra-High Velocity Projectile Launchers,' Intl. J. Impact Engineering, Vol. 10, pp. 185-196 https://doi.org/10.1016/0734-743X(90)90058-4
  10. Lukasiewics, J., 1967, 'Constant Acceleration Flows and Applications to High Speed Guns,' J. AIAA, Vol. 5, No. 11, pp. 1955-1963 https://doi.org/10.2514/3.4346
  11. Rudinger, G., 1955, 'Wave Diagrams for Nonsteady Flows in Ducts,' D. Van Nostrand Company, Inc., pp. 56-59
  12. Smith, F., 1963, 'Theory of Two Stage Hypervelocity Launcher to Give Constant Driving Pressure at the Model,' J. Fluid Mechanics, Vol. 17, pp. 113-125 https://doi.org/10.1017/S0022112063001154
  13. Stalker, R. J., 1964, 'Area Change with a Free Piston Shock Tube,' J. AIAA, Vol. 2, pp.396-397 https://doi.org/10.2514/3.2291
  14. Stalker, R. J., 1967, 'A Study of Free Piston Shock Tunnel,' J. AIAA, Vol. 5, pp. 2160-2165 https://doi.org/10.2514/3.4402
  15. Tani, K., Itoh, K., Takahashi, M., Tanno, H., Komuro, T. and Miyajima, H., 1994, 'Numerical Study of the Free-Piston Shock Tunnel Performance,' Shock Waves, Vol. 3, pp.313-319 https://doi.org/10.1007/BF01415829
  16. Timothy, G. T. and Lalit, C. C., 1995, 'Computational Design of Hypervelocity Launchers,' Intl. J. Impact Engineering, Vol. 17, pp. 849-860 https://doi.org/10.1016/0734-743X(95)99905-7