Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Design of New Type Universal Motor Using Soft Magnetic Composites

  • Kim Byung-Taek (Dept. of Electrical and Electronic Engineering, Kunsan National University)
  • Published : 2006.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a new structure for the universal motor using soft magnetic composite (SMC). The stator for this new type of motor is made by combination of the SMC pole and the silicon steel yoke. The shape of the 3D SMC pole is designed to minimize ohmic loss and amount of stator coil. To design the pole shape, the 3D analysis in the design procedure is replaced with an equivalent 2D analysis. Finally, the optimal shape is analyzed by 3D FEM and the performance is discussed.

Keywords

References

  1. Z. Zhang, F. Profumo, and A. Tenconi, 'Analysis and experimental validation of performance for an axial flux permanent magnet brushless DC motor with powder iron metallurgy cores.' IEEE Trans. Magn.. vol. 33, no. 5, pp. 4194-4196, September 1997 https://doi.org/10.1109/20.619707
  2. A. Jack, 'Experience with the use of soft magnetic composite in electrical machines.' ICEM, Istanbul., pp. 4141-4148, September 1998
  3. A.G. Jack, B.C. Mecrow, and C.P. Maddison, 'Combined radial and axial permanent magnet motors using soft magnetic composites.' IEE, International Conf. on Electrical Machines and Drives, no. 468, pp. 25-29, September 1999
  4. R.J. Hill-Cottingham, J.F. Eastham, 'Use of iron powder material for MR imaging magnet pole faces.' IEEE Trans. Magn.. vol. 31, no. 6, pp. 4074-4076, November 1995 https://doi.org/10.1109/20.489866
  5. G. Roberts, A. Davidson, S. Gair, and J. Hajto, 'An overview of the powder processing of soft magnetic composites.' J. Science and Education, pp. 237-240, December 2001
  6. Goga Cvetkovski, Lidija Petkovska, Milan Cundev, and Sinclair Gair, 'Improved design of a novel PM disk motor by using soft magnetic composite material.' IEEE Trans. Magn.. vol. 38, no. 5, pp. 3 165-3 167, September 2002
  7. You Guang Guo, Jian Guo Zhu, Jin Jiang Zhong, and Wei Wu, 'Core losses in claw pole permanent magnet machines with soft magnetic composite stators.' IEEE Trans. Magn.. vol. 39, no. 5, pp. 3199-3201, September 2003 https://doi.org/10.1109/TMAG.2003.816057
  8. Jerome Cros and Philippe Viarouge, 'New structure of poly-phase claw-pole machines.' IEEE Trans. Industry App. vol. 40, no. 1, pp. 113-120, JanuaryRebmary 2004 https://doi.org/10.1109/TIA.2003.821648
  9. Thomas Hennerson, Stephane Clenet, Jerome Cros, and Philippe Viarouge, 'Evaluation of 3-D finite element method to study and design a soft magnetic composite machine.' IEEE Trans. Magn.. vol. 40, no. 2, pp. 786-789, March 2004 https://doi.org/10.1109/TMAG.2004.825180

Cited by

  1. Design of a Brushless PM Starter Generator for Low-Cost Manufacture and a High-Aspect-Ratio Mechanical Space Envelope vol.53, pp.2, 2017, https://doi.org/10.1109/TIA.2016.2633944