대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

인버터 구동 유도전동기 고정자 권선의 함침기법에 따른 절연성능 평가

Evaluation of Insulation Performance on Stator Windings of Inverter-Fed Induction Motor According to Impregnation Techniques

  • 황돈하 (한국전기연구원 전력설비진단연구그룹) ;
  • 강동식 (한국전기연구원 전력설비진단연구그룹) ;
  • 김용주 (한국전기연구원 융합기술연구단) ;
  • 이인우 ((주)효성 중공업연구소) ;
  • 구자윤 (한양대 공대 전자컴퓨터공학부) ;
  • 김동희 (영남대 공대 전기공학과) ;
  • 이광식 (영남대 공대 전기공학과)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The low-voltage induction motors have been widely driven by IGBT PWM inverters, ever since it was used to apply variable speed drives. Recently, the insulation failures of the stator windings become critical problems due to the high ratio of dv/dt in IGBT PWM inverters. In this paper, the detailed insulation tests on the IGBT PWM inverter fed induction motor are carried out. Five different types of insulation techniques are used to ti induction motors. The change of the insulation characteristics such as partial discharge, AC current, capacitance, and dissipation factor are compared. respectively In addition, insulation breakdown tests using the high voltage pulse are performed, and corresponding breakdown voltages are analyzed.

키워드

참고문헌

  1. M. Kaufhold, H. Auinger, M. Berth, J. Speck, and M. Eberhardt, 'Electrical Stress and Failure Mechanism of the Winding Insulation in PWM-Inverter-Fed Low-Voltage Induction Motors', IEEE Transactions on Industrial Electronics, Vol. 47, No. 2, pp. 396-402, April 2000 https://doi.org/10.1109/41.836355
  2. A.H. Bonnett, 'A Comparison Between Insulation Systems Available for PWM-Inverter-Fed Motors', IEEE Transactions on Industry Applications, Vol. 33, No. 5, pp. 1331-1341, Sep./Oct. 1997 https://doi.org/10.1109/28.633814
  3. Erik Persson, 'Transient Effects in Application of PWM Inverters to Induction Motors', IEEE Transactions on Industry Applications, Vol. 28, No. 5 pp. 1095-1101, Sep./Oct. 1992 https://doi.org/10.1109/28.158834
  4. D.H. Hwang, D.Y. Park, Y.J. Kim, D.H. Kim, J.Y Koo, and J.H. Kim, 'Analysis of Insulation Characteristics of Low-Voltage Induction Motor Driven by IGBT PWM Inverter', Conference Record of the 2000 IEEE International Symposium on Electrical Insulation, Anaheim, USA, pp. 17-20, Apr. 2-5, 2000 https://doi.org/10.1109/ELINSL.2000.845410
  5. A.V. Jouanne and P.N. Enjeti, 'Design Considerations for an Inverter Output Filter to Mitigate the Effects of Long Motor Leads in ASD Applications', IEEE Transactions on Industry Applications, Vol. 33, No. 5, pp. 1138-1145, Sep./Oct. 1997 https://doi.org/10.1109/28.633789
  6. Y. Sozer, D.A. Torrey, and S. Reva, 'New Inverter Output Filter Topology for PWM Motor Drives', IEEE Transactions on Power Electronics, Vol. 15, No. 6, pp. 1007-1017, Nov. 2000 https://doi.org/10.1109/63.892815
  7. W. Yin, 'Dielectric Properties of an Improved Magnet Wire for Inverter-Fed Motors', IEEE Electrical Insulation Magazine, Vol. 13, No. 4, pp. 17-23, Jul./Aug. 1997 https://doi.org/10.1109/57.603555
  8. H. Brandes and J.A. Allison, 'Insulating Systems for Inverter-Driven Motors ; Status and Developments', Power Engineering Journal, Vol. 14, No. 4, pp. 164-168, Aug. 2000 https://doi.org/10.1049/pe:20000403
  9. 황돈하, 박도영, 김용주, 구자윤, 박태익, 김진홍,'IGBT 인버터 구동 저압 유도전동기의 절연특성 연구', 1999 년도 대한전기학회 하계학술대회 논문집(B), pp. 206-210, 1999. 7. 19-21