참고문헌
- Bin, H. Z., Yamazaki, K. and De Vries, M. F., 'A Microprocessor-Based Control Scheme for the Improvement of Contouring Accuracy,' Annals of the CIRP, Vol. 32, pp. 275-279, 1983 https://doi.org/10.1016/S0007-8506(07)63404-0
- Doraiswami, R. and Gulliver, A., 'A Control Strategy for Computer Numerical Control Machine Exhibiting Precision and Rapidity,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 106, pp. 56-62, 1984 https://doi.org/10.1115/1.3149664
- Johnson, W. C., Shrinivasan, K. and Kulkarni, P., 'Digital Control Algorithms for Electrical Machine Tool Feed Drives,' Proceedings of the 12th North American Manufacturing Research Conference, Hougton, Michigan, pp. 447-453, 1984
- Makino, H. and Ohde, T., 'Motion Control of the Direct Drive Actuator,' Annals of the CIRP, Vol. 40, pp. 375-387, 1991 https://doi.org/10.1016/S0007-8506(07)62010-1
- Ono, Y. and Kuwahara, H., 'The New Design of Motor, Position Sensor and Position Control System for Direct Drive Manipulators,' Proceedings of the ASME, Robotics: Theory and Applications, Anaheim, California, pp. 123-128, 1986
- Pritschow, G. and Philipp, W., 'Direct Drives for High-Dynamic Machine Tool Axes,' Annals of the CIRP, Vol. 39, pp. 413-416, 1990 https://doi.org/10.1016/S0007-8506(07)61085-3
- Schepper, F. and Yamazaki, K., 'Application of ASIC-Technology to Mechatronics Control: Development of the Flexible Servo Peripheral Chip,' Annals of the CIRP, Vol. 37, pp. 389-392,1988 https://doi.org/10.1016/S0007-8506(07)61661-8
- Schepper, F. and Yamazaki, K., 'Development of an ASIC Performing High Speed Current Loop Processing of Servo Motor Control for Mechatronics Applications,' Annals of the CIRP, Vol. 38, pp. 355-358, 1989 https://doi.org/10.1016/S0007-8506(07)62722-X
- Yamazaki, K., 'Development of Flexible Actuator Controller for Advanced Machine Tool and Robot Control,' Annals of the CIRP, Vol. 36, pp. 285-288, 1987 https://doi.org/10.1016/S0007-8506(07)62605-5
- Haack, B. and Tomizuka, M., 'The Effect of Adding Zeros to Feedforward Controllers,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 113, pp. 6-10, 1991 https://doi.org/10.1115/1.2896362
- Masory, O., 'The Effect of a Velocity Feed Forward Loop on Contour Accuracy,' Proceedings of the 7th International Motor Conference, pp. 418-428, 1985
- Pak, H. A., 'Adaptive Matching and Preview Controllers for Feed Drive Systems,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 113, pp. 316-320, 1991 https://doi.org/10.1115/1.2896383
- Tsao, T. C. and Tomizuka, M., 'Adaptive Zero Phase Error Tracking Algorithm for Digital Control,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 109, pp. 349-354, 1987 https://doi.org/10.1115/1.3143866
- Tomizuka, M., Chen, M. S., Renn, S. and Tsao, T. C., 'Tool Positioning for Noncircular Cutting with Lathe,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 109, pp. 176-179, 1987 https://doi.org/10.1115/1.3143836
- Tomizuka, M., 'Zero Phase Error Tracking Algorithm for Digital Control,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 109, pp. 65-68, 1987 https://doi.org/10.1115/1.3143822
- Tomizuka, M., 'Synchronization of Two Motion Control Axes under Adaptive Feedforward Control,' Proceeding of the ASME: Adaptive and Learning Control, DSC-Vol. 21, pp. 1-8, 1990
- Week, M. and Ye, G., 'Sharp Comer Tracking Using the IKF Control Strategy,' Annals of the CIRP, Vol. 39, pp. 437-441, 1990 https://doi.org/10.1016/S0007-8506(07)61091-9
- Koren, Y., 'Cross-Coupled Biaxial Computer Control for Manufacturing Systems,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 102, pp. 265-272, 1980 https://doi.org/10.1115/1.3149612
- Kulkarni, P. K. and Srinivasan, K., 'Optimal Contouring Control of Multi-Axial Feed Drive Servomechanisms,' ASME Journal of Engineering for Industry, Vol. 111, pp. 140-148, 1989 https://doi.org/10.1115/1.3188743
- Kulkarni, P. K. and Srinivasan, K., 'Cross-Coupled Control of Biaxial Feed Drive Servomechanisms,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 112, pp. 225-232, 1990 https://doi.org/10.1115/1.2896129
- Chuang, H. Y. and Liu, C. H., 'Cross-Coupled Adaptive Feedrate Control for Multiaxis Machine Tools,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 113, pp. 451-457, 1991 https://doi.org/10.1115/1.2896431
- Koren, Y. and Lo, C. C., 'Variable-Gain Cross-Coupling Controller for Contouring,' Annals of the CIRP, Vol. 40, pp. 371-374, 1991 https://doi.org/10.1016/S0007-8506(07)62009-5
- Erkokmaz, K. and Altintas, Y., 'High Speed Contouring Algorithm for CNC Machine Tools,' Proceedings of the ASME Dynamic Systems and Control Division, DSC-Vol. 64, pp. 463-469, 1998
- Chiu, G. T. C. and Tomizuka, M., 'Coordinated Position Control of Multi-Axis Mechanical Systems,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 389-393, 1998 https://doi.org/10.1115/1.2805413
- Lee, H. C. and Jeon, G J., 'Real-time Compensation of Two-dimensional Contour Error in CNC Machine Tools,' Proceedings of the 1999 IEEE/ASME-International Conference on Advanced Intelligent Mechatronics, pp. 623-628, 1999 https://doi.org/10.1109/AIM.1999.803240
- Yeh, S. S. and Hsu, P. L., 'Theory and Application of the Robust Cross-Coupled Control Design,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 121, pp. 524-530, 1999 https://doi.org/10.1115/1.2802506
- Lee, Y. and Jee, S., 'Adaptive Cross-Coupling Control for High-Speed Nonlinear Contour Machining,' Journal of the KSPE, Vol. 17, pp. 108-114,2000
- Shih, Y. T., Chen, C. S. and Lee, A. C., 'A Novel Cross-Coupling Control Design for Bi-Axis Motion,' International Journal of Machine Tools & Manufacture, Vol. 42, pp. 1539-1548,2002 https://doi.org/10.1016/S0890-6955(02)00109-8
- Yeh, S. S. and Hsu, P. L., 'Analysis and Design of Integrated Control for Multi-Axis Motion Systems,' IEEE Transactions on Control Systems Technology, Vol. 11, pp. 375-382, 2003 https://doi.org/10.1109/TCST.2003.810372
- Jee, S. and Koo, T., '3-Axis Coupling Controller for High-Precision/High-Speed Contour Machining,' Transactions of the KSME, A, Vol. 28, pp. 40-47, 2004 https://doi.org/10.3795/KSME-A.2004.28.1.040
- Kuo, B. C., 'Digital Control Systems,' 2nd Edition, Oxford University Press, pp. 294-300, 1992