열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제19권2호
  • /
  • Pages.96-102
  • /
  • 2006
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지

교반관법으로 제조한 Mg-Al-Zn-X합금의 기계적 특성

Microstructure and Mechanical Properties of Mg-Al-Zn-X Alloys Fabricated by Rotation-Cylinder Method

  • 이정일 (충주대학교 신소재공학과) ;
  • 이주호 (충주대학교 신소재공학과) ;
  • 김영호 (충주대학교 신소재공학과) ;
  • 홍태환 (충주대학교 신소재공학과) ;
  • 이후인 (한국지질자원연구원 자원활용소재연구부) ;
  • 박진태 (한국지질자원연구원 자원활용소재연구부) ;
  • 김준수 (한국지질자원연구원 자원활용소재연구부) ;
  • 박형규 (한국지질자원연구원 자원활용소재연구부)
  • Lee, Jung-Il (Dept. of Materials Science and Engineering/Nano Tech. Lab., Chungju National University) ;
  • Lee, Joo-Ho (Dept. of Materials Science and Engineering/Nano Tech. Lab., Chungju National University) ;
  • Kim, Young-Ho (Dept. of Materials Science and Engineering/Nano Tech. Lab., Chungju National University) ;
  • Hong, Tae-Whan (Dept. of Materials Science and Engineering/Nano Tech. Lab., Chungju National University) ;
  • Lee, Hoo-In (Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources) ;
  • Park, Jintae (Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources) ;
  • Kim, Joon-Soo (Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources) ;
  • Park, Hyungkyu (Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources)
  • 투고 : 2006.02.24
  • 심사 : 2006.03.13
  • 발행 : 2006.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Development of Rotation-Cylinder Method(RCM) is given for Mg-Al-Zn-X(X=Sr) alloys, identifying some of the key factors that need to be controlled and indicating subsequent casting processes. Effects of Sr addition on the microstructure and mechanical properties of as-cast and T6 heat-treated Mg-Al-Zn-X alloys fabricated by the RCM were investigated. The microstructural and mechanical characterizations were performed by utilizing optical microscope, scanning electron microscope, transmission electron microscope, hardness test and ultimate tensile test. The solution and aging treatment time was varied to optimize the T6 heat treatment conditions, and experimental results were discussed. The grain size of Sr containing alloys was refined by increasing Sr content, but the tensile and yield strengths were increased by addition up to 1wt% Sr.

키워드

참고문헌

  1. R. S. Busk : Magnesium Product Design, Marcel Dekker Inc., New York (1987) 41
  2. D. J. Lloyd: Int. Mat. Rev., 39 (1994) 1 https://doi.org/10.1179/095066094790150982
  3. M. D. Skibo and D. H. Schuster: US Patent 4786467 (1988)
  4. K. T. Lee, H. S. Ha and Y. J. Kim : Met. & Mater., 34(12) (1996) 1651
  5. S. K. Kim and Y. J. Kim: J. Kor. lnst. Met. & Mater Met. & Mater., 6 (2000) 359
  6. B. H. J. Lugt : Vortex Flow in Nature and Technology, John Wiley & Sons, New York (1983)
  7. S. K. Kim and Y. J. Kim: Mat. Sci. Tech., 16 (2000) 877 https://doi.org/10.1179/026708300101508603
  8. A. Sanschagrin, R. Tremblay and R. Angers: Mat. Sci. & Eng., A220 (1996) 69
  9. I. J. Polmear : Mat. Sci. Tech., 10 (1994) 1 https://doi.org/10.1179/026708394790163401
  10. Y. Li and H. Jones: Mat. Sci. Tech., 12 (1996) 81 https://doi.org/10.1179/mst.1996.12.1.81
  11. K. S. Nair and M. C. Mittal : Mater. Sci. Forum, 30 (1998) 89
  12. E. F. Emley : Principles of Magnesium Technology, Pergamon Press, London (1966) 218
  13. A. J. Murphy and R. J. M. Payne: J. lnst. Metals, 73 (1947) 105
  14. L. Y. Wei : Ph.D Thesis, Chalmers Univ. of Technology, Goteborg, Sweden (1990)
  15. G. Foerster: Conf. 33rd Inter. Magnesium Association Annual Meeting, (1976) 35
  16. S. H. Lee, S. Lee and D. H. Kim: J. Kor. lnst. Met. & Mater., 34(5) (1996) 585
  17. Z. P. Luo, D. Y. Song and S. Q. Zhang: J. Alloys and Compounds, 230 (1995) 109 https://doi.org/10.1016/0925-8388(95)01893-X
  18. I. A. Anyanwu, Y. Gokan, A. Suzuki, S. Kamado, Y. Kojima, S. Takeda and T. Ishida: Mat. Sci. and Eng., A380 (2004) 93
  19. F. Audebert, S. Rozenberg and M. Galano: J. Non-Crystalline Solids, 287 (2001) 45 https://doi.org/10.1016/S0022-3093(01)00537-3
  20. Y. Lli, Q. Wang, X. Zeng, W. Ding, C. Zhai and Y. Zhu: Mat. Sci. and Eng., A278 (2000) 66
  21. Y. Wang, Q. Wang, C. Ma, W. Ding and Y. Zhu: Mat. Sci. and Eng., A342 (2003) 178
  22. J. I. Lee, T. W. Hong, Y. J. Kim, J. S. Kim and H. K. Park: Mater. Sci. Forum, 510-511 (2006) 182
  23. J. I. Lee and Y. J. Kim: Kor. J. Electron Microscopy, 29(3) (1999) 281
  24. S. L. Coleman, V. D. Scott and B. McEnaney: Mat. Sci., 29 (1994) 2826 https://doi.org/10.1007/BF01117589
  25. W. J. Park, H. Park, D. H. Kim and N. J. Kim: Mater. Sci. Eng., A179-180 (1994) 637
  26. W. J. Park and N. J. Kim: Scripta Metall., 32 (1995) 1747 https://doi.org/10.1016/0956-716X(95)00011-J