Journal of Mechanical Science and Technology

  • 제20권5호
  • /
  • Pages.643-651
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Fault Tolerant Homopolar Magnetic Bearings with Flux Invariant Control

  • Na Uhn-Joo (Division of Mechanical and Automation Engineering, Kyungnam University)
  • 발행 : 2006.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The theory for a novel fault-tolerant 4-active-pole homopolar magnetic bearing is developed. If any one coil of the four coils in the bearing actuator fail, the remaining three coil currents change via an optimal distribution matrix such that the same opposing pole, C-core type, control fluxes as those of the un-failed bearing are produced. The hompolar magnetic bearing thus provides unaltered magnetic forces without any loss of the bearing load capacity even if any one coil suddenly fails. Numerical examples are provided to illustrate the novel fault-tolerant, 4-active pole homopolar magnetic bearings.

키워드

참고문헌

  1. Ahn, H. and Han, D., 2003, 'System Modeling and Robust Control of an AMB Spindle Part II A Robust Controller Design and its Implementation,' KSME International Journal, Vol. 17, No. 12, pp. 1855-1866
  2. Allaire, P. E., Lewis, D. W. and Knight, J. D., 1983, 'Active Vibration Control of a Single Mass Rotor on Flexible Supports,' Journal of the Franklin Institute, Vol. 315, pp. 211-222 https://doi.org/10.1016/0016-0032(83)90025-X
  3. Allaire, P. E., Maslen, E. H., Humphris, R. R., Sortore, C. K. and Studer, P. A., 1992, 'Low Power Magnetic Bearing Design for High Speed Rotating Machinery,' Proceedings of the NASA International Symposium on Magnetic Suspension Technology, pp. 317-329
  4. Allaire, P. E., Mikula, A., Banerjee, B. B., Lewis, D. W. and Imlach, J., 1989, 'Design and Test of a Magnetic Thrust Bearing,' Journal of the Franklin Institute, Vol. 326, pp. 831-847 https://doi.org/10.1016/0016-0032(89)90006-9
  5. Bitterly, J. G, and Bitterly, S. E., 1997, 'Fly-wheel Based Energy Storage System,' U.S. Patent No. 5,614,777
  6. Fan, Y., Lee, A. and Hsiao, F., 1997, 'Design of a Permanent/Electromagnetic Magnetic Bearing-Controlled Rotor System,' Journal of the Franklin Institute, Vol. 334B, pp. 337-356 https://doi.org/10.1016/S0016-0032(96)00101-9
  7. Fukata, S. and Yutani, K., 1998, 'Characteristics of Electromagnetic Systems of Magnetic Bearings Biased with Permanent Magnets,' Proceedings of the Sixth International Symposium on Magnetic Bearings, pp. 234-243
  8. Keith, F. J., Williams, R. D. and Allaire, P. E., 1990, 'Digital Control of Magnetic Bearings Supporting a Multimass Flexible Rotor,' STLE Tribology Transactions, Vol. 33, pp. 307-314 https://doi.org/10.1080/10402009008981960
  9. Lee, A. C., Hsiao, F. Z. and Ko, D., 1994, 'Analysis and Testing of a Magnetic Bearing with Permanent Magnets for Bias,' JSME International Journal, Series C, Vol. 37, pp. 774-782
  10. Lee, A. C., Hsiao, F. Z. and Ko, D., 1994, 'Performance Limits of Permanent-Magnet-Biased Magnetic Bearings,' JSME International Journal, Series C, Vol. 37, pp. 783-794
  11. ？Maslen, E. H., Allaire, P. E., Noh, M. D. and Sortore, C. K., 1996, 'Magnetic Bearing Design for Reduced Power Consumption,' ASME Journal of Tribology, Vol. 118, pp. 839-846 https://doi.org/10.1115/1.2831617
  12. Maslen, E. H., Meeker, D. C., 1995, 'Fault Tolerance of Magnetic Bearings by Generalized Bias Current Linearization,' IEEE Transactions on Magnetics, Vol. 31, pp. 2304-2314 https://doi.org/10.1109/20.376229
  13. Maslen, E. H., Sortore, C. K., Gillies, G. T., Williams, R. D., Fedigan, S. J. and Aimone, R. J., 1999, 'A Fault Tolerant Magnetic Bearings,' ASME Journal of Engineering for Gas Turbines and Power, Vol. 121, pp. 504-508 https://doi.org/10.1115/1.2818501
  14. Matsumura, F. and Yoshimoto, T., 1986, 'System Modeling and Control of a Horizontal-Shaft Magnetic-Bearing System,' IEEE Transactions on Magnetics, Vol. 22, pp. 197-206 https://doi.org/10.1109/TMAG.1986.1064296
  15. Na, U. J., 2004, 'Fault Tolerance of Homopolar Magnetic Bearings,' Journal of Sound and Vibration, Vol. 272, pp. 495-511 https://doi.org/10.1016/S0022-460X(03)00379-1
  16. Na, U. J., 2005, 'Fault Tolerant Control of Magnetic Bearings with Force lnvariance,' Journal of Mechanical Science and Technology, Vol. 19. pp. 731-742 https://doi.org/10.1007/BF02916122
  17. Na, U. J. and Palazzolo, A. B., 2001, 'Fault Tolerance of Magnetic Bearings with Material Path Reluctances and Fringing Factors,' IEEE Transactions on Magnetics, Vol. 36, pp. 3939-3946 https://doi.org/10.1109/20.914343
  18. Na, U. J., Palazzolo, A. B. and Provenza, A., 2002, 'Test and Theory Correlation Study for a Flexible Rotor on Fault-Tolerant Magnetic Bearings,' ASME Journal of Vibration and Acoustics, Vol. 124, pp. 359-366 https://doi.org/10.1115/1.1467652
  19. Salm, J. and Schweitzer, G., 1984, 'Modeling and Control of a Flexible Rotor with Magnetic Bearing,' Proceedings of the Third International Conference on Vibrations in Rotating Machinery, pp. 553-561
  20. Sortore, C. K., Allaire, P. E., Maslen, E. H., Humphris, R. R. and Studer, P. A., 1990, 'Permanent Magnet Biased Magnetic Bearings-Design, Construction and Testing,' Proceedings of the Second International Symposium on Magnetic Bearings, pp. 175-182