Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Local Heat Transfer Characteristics for Circular Tubes Using Heat Transfer Promoter

열전달촉진체를 사용한 원관에서의 국소열전달 특성에 관한 연구

  • 권화길 (충남대학교 대학원 기계설계공학과) ;
  • 유성연 (충남대학교 기계설계공학과)
  • Published : 2006.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

For the successful design of heat exchangers, it is very important to understand local heat transfer phenomena on the circular tube of heat exchangers. In the present study, experiments are performed for single circular tube and tube banks with and without heat transfer promoters. The naphthalene sublimation technique is employed to measure the local mass transfer coefficients, and the measured local mass transfer data are converted to the local heat transfer data using heat and mass transfer analogy. The distribution pattern of local Nusselt numbers on single circular tube with heat transfer promoters is similar to that without the heat transfer promoter, but average Nusselt numbers are greatly increased. In case of tube banks without the heat transfer promoter, the Nusselt numbers are much lower in the first row than those of other rows, but the local heat transfer coefficients on all rows are equalized when the heat transfer promoter is installed.

Keywords

References

  1. Goldstein, R. J. and Karni, J., 1984, 'The Effect of a Wall Boundary Layer on Local Mass Transfer From a Cylinder Crossflow,' J. of Heat Transfer, Vol. 106, pp. 260-267 https://doi.org/10.1115/1.3246667
  2. Goldstein, R. J., Karni, J. and Zhu, Y., 1990, 'Effect of Boundary Conditions on Mass Transfer Near the Base of a Cylinder in Crossflow,' J. of Heat Transfer, Vol. 112, pp. 501-504 https://doi.org/10.1115/1.2910410
  3. Yoo, S. Y., 1989, 'A Study on the Mass Transfer from a Square Cylinder and Its Base Plate Using Naphthalene Sublimation Technique,' Ph.D. Dissertation, KAIST, Daejeon, Korea
  4. Zukauskas, A., 1972, 'Heat Transfer from Tubes in Crossflow,' Vol. 8, Academic Press, New York, pp. 93-160
  5. Kim, K. H. and Yoon, Y. H., 2003, 'Study on Measurement and Numerical Analysis for Fluid Flow past a Circular Cylinder in Rectangular Duct,' Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 15, No. 12, pp. 1095-1102
  6. Kim, K. C., Choi, D. G. and Park, J. D., 2001, 'Measurement of Flow Field Through a Staggered Tube Bundle Using Particle Image Velocimetry,' Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 13, No.7, pp. 595-601
  7. Aiba, S., Tsuchida, H. and Ota, T., 1982, 'Heat Transfer Around Tubes in In-line Tube Banks,' Bulletin of JSME, Vol. 25, No. 204, pp. 919-926 https://doi.org/10.1299/jsme1958.25.919
  8. Aiba, S., Tsuchida, H. and Ota, T., 1982, 'Heat Transfer Around Tubes in Staggered Tube Banks,' Bulletin of JSME, Vol. 25, No. 204, pp. 927-933 https://doi.org/10.1299/jsme1958.25.927
  9. Yoo, S. Y.; Park, D. S., Chung, M. H. and Lee, S. Y., 2002, 'Heat Transfer Enhancement for Fin-Tube Heat Exchanger Using Vortex Genertors,' KSME Int. J., Vol. 16, No. 1, pp. 109-115 https://doi.org/10.1007/BF03185161
  10. Yoo, S. Y., Chung, M. H., Park, D. S. and Lee, S. S., 2002, 'An Experimental Study on the Local and Overall Heat Transfer Characteristics of a Fin-Flat Tube Heat Exchanger,' Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 14, No. 11, pp. 939-947
  11. Ambrose, D., Lawrenson, I. J. and Sprake, C. H. S., 1975, 'The Vapor Pressure of Naphthalene,' J. of Chemical Thermodynamics, Vol. 7, pp. 1173-1176 https://doi.org/10.1016/0021-9614(75)90038-5
  12. Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
  13. Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single-sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8