Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

Development of Design Catalogue to Reduce the Design Period for Recycling

리사이클링 고려 설계시간 단축을 위한 설계카탈로그의 개발

  • 이건상 (국민대학교 기계자동차공학부)
  • Published : 2006.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Today the tastes of consumers change rapidly and the kinds of the products become diverse. There- fore the product life cycle becomes shorter and shorter. Moreover the save of resources and the recycling for the environmental preservation are the essential theme. On this the necessary information for the product development increases enormously. For the right use of the information the design process should be supported by the proper design tool. For this the 'design catalogue system for recycling' is suggested here. This system consists of four parts. that is, 'the existing automobile system database', 'welting principle database', 'Assessment system of the ease of disassembly' and 'one's own product development ratabase'. By the use of this system the product development period could be reduced about 30% drastically.

Keywords

References

  1. Lee, K. S. et al., 'Development of Design Catalogue for Automobile Parts', Final Report of Cleaner Production Program, 2004
  2. Pahl, G. and Beitz, W., Konstruktionslehre, 4. Auflage, Springer Verlag, 1997
  3. Wende, Andreas, Integration der recycling- orientierten Produktgestaltung in den methodischen Konstruktionsprozess, p. 28, Ph. D. thesis, VDl Reihe 1 Nr. 239, VDl-Verlag GmbH, Duesseldorf, 1994
  4. Roth, K., Konstruieren mit Konstruktions- katalogen, Band III Verbindungen und Verschluesse Loesungsfindung, 2. Auflage, Springer Verlag, 1996
  5. Lee, K. S. et al., A Development of Design Process for Recycling, The KSME Annual Fall Conference Proceedings, pp. 1289-1295, April 23-25, 2003
  6. Lee, K. S. et al., An Analysis of Joining Structure for the Design for Recycling, The KSAE Annual Spring Conference Proceedings, pp. 931-936, May 22-24, 2003
  7. Lee, K.-S. et al., A Study on the Method of Disassembly Time Evaluation of a Product using Work Factor Method, 2003 IEEE International Conference on Systems, Man & Cybernetics, SMC 2003 Conference Proceedings, pp. 1753-1759
  8. Boothroyd, G., Dewhurst, P. and Knight, W., Product Design for Manufacture and Assembly, p. 6, Marcel Dekker, Inc., 2002