Abstract
In this paper, the effect of variation of density and uniformity coefficient on shear strength was analyzed from the results of large scale shear test. In addition, the friction coefficient at critical state per vertical load was estimated using the equation proposed by Wood (1998). The test sample fur the test was obtained from the local quarry sites. Tests results show that the shear strength of $2.10g/cm^3$ is relatively larger than that of $1.85g/cm^3$ and uniformity coefficient (5.0) has larger shear strength than that in 10.0. In the meantime, the friction coefficient at critical state shows $1.0{\sim}1.6$ according to the test conditions.
본 고에서는 선행연구(홍성연, 2004)에서 개발한 대형직접전단시험기를 이용하여 조립질 토목재료의 시험밀도와 균등계수의 크기가 전단강도에 주는 영향을 분석하였으며, 아울러, 각 수직응력별로 한계상태에서 조립재료가 갖고 있는 마찰계수를 Wood(1998)가 제안한 방정식을 이용하여 산출하였다. 시험에 사용한 재료는 경상과 전라지역 석산에서 생산중인 조립재료이다. 시험결과 시험밀도 $2.10g/cm^3$의 전단강도의 크기가 $1.85g/cm^3$의 값보다 상대적으로 크게 나타났으며, 균등계수는 상대적으로 10.0보다 5.0일때 더 큰 전단강도를 갖는 것으로 나타났다. 한편, 조립질 토목재료가 갖고 있는 한계상태에서의 마찰계수는 각 시험조건별로 $1.0{\sim}1.6$의 범위로 나타났다.