초록
탈지 대두분을 이용하여 두부를 제조함에 있어 각 공정의 최적조건을 알아보았다. 탈지 대두분을 물과 1:9 (wt/wt)의 비율로 혼합하고 용액을 교반하면서 가열하였다. 탈지 대두분 두유를 $80^{\circ}C$ 이상으로 가열해야 응고제를 가할 경우 단백질이 응고현상을 보였으며 두부의 형태로 만들 수 있었다. 한편 탈지 대두분 두유의 가열 온도 $80^{\circ}C$에서 가장 높은 수율로 두부가 제조되었다. 두부의 수분 함량 역시 탈지 대두분 두유 가열 온도에 의해 영향을 받는 것으로 나타났다. $85{\sim}90^{\circ}C$에서 77%로 가장 높은 수분 함량을 나타내었다. 따라서 $80^{\circ}C$이상으로 탈지 대두분 두유를 가열하는 과정이 두부 제조에 필수적인 과정인 것으로 판단된다. 탈지 대두분 두유의 가열시간의 경우, 5분 미만일 때 응고현상을 나타내지 않았고 가열시간이 $5{\sim}10$분일때 두부의 무게가 증가하는 경향을 보였으며 수분함량은 $1{\sim}10$분 사이일 경우 80% 정도로 유지되었으나 10분을 초과할 경우 수분함량이 감소하는 것으로 나타났다. 따라서 두부를 $5{\sim}10$분 가량 가열하는 것이 대두 단백질의 변성이 충분하게 일어나고 두부의 수분 함랑도 적절하게 유지되는 것으로 사료된다. 지방질을 20 g 첨가하였을 때 두부의 무게와 수분함량이 가장 높았으며 그 이상으로 첨가하였을 때는 두부의 무게와 수분 함량이 감소하는 경향을 나타냈다. 이는 높은 지방 함량이 두부 조직과 물 분자 사이의 결합을 방해하기 때문인 것으로 사료된다. 글루코노 델타 락톤 첨가량이 증가함에 따라 제조된 두부의 무게는 비례하게 증가되었고 12 g 이상 첨가된 두부의 무게는 일정한 수준을 유지하였다. 글루코노 델타 락톤 첨가량은 견고성에 영향을 끼치는데 첨가량이 5 g일 때 가장 단단한 두부가 만들어졌으며 그 이상을 첨가하면 견고성은 감소하다 추가적인 글루코노 델타 락톤 첨가에도 거의 일정한 수준을 유지하는 경향을 보였다. 응고제 첨가온도에 따른 두부의 무게는 $75^{\circ}C$일 때 가장 많은 두부가 제조되었으며 $65^{\circ}C$의 낮은 온도나, $85^{\circ}C$의 높은 온도에서는 무게가 감소하는 경향을 나타내었다. 수분함량 역시 $75^{\circ}C$에서 가장 높은 수분함량을 나타내었고 낮은 온도와 높은 온도에서는 비교적 수분함량이 감소하는 경향을 보였다. 두부의 저장성은 실온과 $4^{\circ}C$ 모두 저장시간이 경과할수록 colony 수가 증가하였다.
This study was carried out to determine the optimum conditions for making soybean curd(or tofu) from defatted soybean flour.. Heating soymilk above $80^{\circ}C$ for at least $5{\sim}10\;min$ was necessary for soybean protein to form aggregates during subsequent coagulation process with glucono-${\delta}$-lactone(GDL). For maximum yield of tofu, with water content of approximately 80%, extra addition of 20 g of oil and 5 g of GDL per 425 g of soybean flour was needed. Maintaining soymilk temperature around $75^{\circ}C$ for 5 min was necessary when GDL was used as the coagulant.