초록
닭가슴살을 이용하여 pH를 2.5(T1), 3.0(T2), 10.5(T3) 및 11.0(T4)으로 조절하여 제조한 수리미의 이화학적 특성을 비교한 결과는 다음과 같다. 수분 함량은 T4>T1>T3>T2 순이었으며, 조단백질 및 조지방 함량은 알칼리 처리한 구들이 산 처리한 구들에 비하여 높았으며, 염용성 단백질 추출성, 보수력 및 육색 $L^*$값은 동일한 산과 알칼리 처리구 내에서 pH가 높을수록 높게 나타났다(p<0.05). 수율은 T1이 가장 높았고 T4가 가장 낮았다(p<0.05). pH는 T4가 가장 높았으며, T2, T3가 낮았고, 전단가는 알칼리 처리구들이 산 처리구들에 비하여 높았다(p<0.05). 파괴강도 및 변형값은 T1이 다른 세 처리구들에 비하여 높았다(p<0.05). 육색 $a^*$값은 T3>T2>T4>T1 순이었고, $b^*$값은 T4가 다른 세 처리구들에 비하여 낮았다(p<0.05). 조직감 중 씹힘성은 T2, T3가 T1과 T4에 비하여 높았으며, 경도는 T2>T3>T4>T1 순이었고, 응집성과 검성은 T1이 다른 세 처리구들에 비하여 낮았으며, 탄력성은 T4가 가장 높고 T2가 가장 낮았다(p<0.05). 표면경도는 T3가 가장 높고 T1이 가장 낮았다(p<0.05). 관능검사의 외관은 T2가 가장 높고 T3가 가장 낮은 것(p<0.05)을 제외하고는 전 항목에서 처리 간에 유의적인 차이를 보이지 않았다(p>0.05). 종합적으로 볼 때 pH 11.0으로 조절한 알칼리 처리구인 T4가 다른 세 처리구들에 비하여 수리미의 이화학적 품질이 양호한 결과였다.
This study was conducted to determine the effect of pH adjustment on physico-chemical characteristics of chicken breast surimi. The chicken breast meat was ground with distilled water, of which pH was then adjusted to 2.5 (T1), 3.0 (T2), 10.5 (T3) and 11.0 (T4) for surimi manufacture, respectively. Water content was higher in order of T4>T1>T3>T2 (p<0.05). Crude protein and crude fat were higher in T3 and T4 compared with T1 and T2 (p<0.05). $L^*$ values, myofibrillar protein and water holding capacity of T2 and T4 were higher than those of T1 and T3 (p<0.05). T4 had the lowest yield among the treatments (p<0.05). T1 was higher in yield and pH, whereas breaking force and deformation were higher in T1 (p<0.05). $a^*$ was higher in order of T3>T2>T4>T1 and $b^*$ was lower in T1 compared with other treatments (p<0.05). In textural properties, the chewiness values of T2 and T3 were higher than those of T1 and T4, the hardness was higher in order of T2>T3>T4>T1 (p<0.05). Cohesiveness and gumminess of T1 showed higher values than those of other treatments (p<0.05). In sensory evaluation, the note for appearance was higher in T2 than other treatments (p<0.05), however other traits were not significantly different (p>0.05). Therefore, the alkaline processing (T4, pH 11.0) would be recommended.