TRNSYS Dynamic Simulation for Solar Heating and Cooling Load Estimations

태양열 냉난방 부하산정을 위한 TRNSYS 동적 시뮬레이션

  • Choi, Chang-Yong (Mechanical and Automotive Engineering Dept., Jeonju University) ;
  • Ko, Sang-Cheol (Mechanical and Automotive Engineering Dept., Jeonju University) ;
  • Kwak, Hee-Youl (New and Renewable Energy Research Dept., Korea Institute of Energy Research)
  • 최창용 (전주대학교 기계자동차공학과) ;
  • 고상철 (전주대학교 기계자동차공학과) ;
  • 곽희열 (한국에너지기술연구원)
  • Published : 2006.03.31

Abstract

This paper presents the heating and cooling load estimations for the library of a cultural center building located in Gwangju Korea by TRNSYS with Type 56 of multi-zone building components. In this study, energy rate control mode is selected and the design temperatures for heating and cooling are specified respectively as 20oC and 26oC. Reading rooms of the library are located on the third floor of the cultural center building, and this third floor space is modeled as the five thermal zones for the TRNSYS simulation. Among the five zones, attention is given to the two zones which are the reading rooms 1 and 2. Since these two zones are to be heated and cooled by the solar thermal system which is planned to be installed in the building, dynamic thermal behaviors of the two zones are analyzed by the heating and cooling load estimations.

Keywords

References

  1. Florides, G.A., Kalogirou, S.A., Tassou, S.A., and Wrobel, L.C., Modeling of the modem houses of Cyprus and energy consumption analysis, Energy, Vol.25, 915-937 (2000) https://doi.org/10.1016/S0360-5442(00)00030-X
  2. Florides, G.A., Tassou, S.A., Kalogirou, S.A., and Wrobel, L.C., Measures used to lower building energy consumption and their cost effectiveness, Applied Energy, Vol.73, 299-328 (2002) https://doi.org/10.1016/S0306-2619(02)00119-8
  3. Klein, S.A., Beckman, W.A., Mitchell, J.W., Duffie, J.A., Duffie, N.A., Freeman, T.L., et. al.,TRNSYS manual, University of Wisconsin (1998)
  4. Wang, S. and Chen, Y., A novel and simple building load calculation model for building and syytem dynamic simulation, Applied Thermal Engineering, Vol.21, 683-702 (2001) https://doi.org/10.1016/S1359-4311(00)00073-9
  5. Mcquiston, F.C., Parker, J.D., and Spitler J. D., Heating, Ventilating, and Air Conditioning: Analysis and Design, 5th Ed., John Wiley & Sons, New York (2000)