DOI QR코드

DOI QR Code

Effects of load height application and pre-buckling deflections on lateral buckling of thin-walled beams

  • Mohri, F. (IUT Nancy-Brabois, Departement Geie Civil, Universite Henri Poincare) ;
  • Potier-Ferry, M. (LPMM, UMR CNRS 7554, ISGMP, Universite Paul Verlaine-Metz)
  • 투고 : 2005.11.16
  • 심사 : 2006.05.23
  • 발행 : 2006.10.25

초록

Based on a non-linear model taking into account flexural-torsional couplings, analytical solutions are derived for lateral buckling of simply supported I beams under some representative load cases. A closed form is established for lateral buckling moments. It accounts for bending distribution, load height application and pre-buckling deflections. Coefficients $C_1$ and $C_2$ affected to these parameters are then derived. Regard to well known linear stability solutions, these coefficients are not constant but depend on another coefficient $k_1$ that represents the pre-buckling deflection effects. In numerical simulations, shell elements are used in mesh process. The buckling loads are achieved from solutions of eigenvalue problem and by bifurcations observed on non linear equilibrium paths. It is proved that both the buckling loads derived from linear stability and eigenvalue problem lead to poor results, especially for I sections with large flanges for which the behaviour is predominated by pre-buckling deflection and the coefficient $k_1$ is large. The proposed solutions are in good agreement with numerical bifurcations observed on non linear equilibrium paths.

키워드

참고문헌

  1. Achour, B. and Roberts, T. M. (2000), 'Non-linear strains and stability of thin-walled bars', J. Contruct. Steel Res., 56, 237-252 https://doi.org/10.1016/S0143-974X(99)00072-3
  2. Barsoum, R. S. and Gallagher, R. H. (1970), 'Finite element analysis of torsional and torsional-flexural stability problems', Int. J. Numer. Methods Eng., 2, 335-352 https://doi.org/10.1002/nme.1620020304
  3. Bazant, Z. P. and El Nimeiri, M. (1973), 'Large-deflection spatial buckling of thin walled beams and frames', J. Eng. Mech. Div., ASCE, 99, 1259-1281
  4. Eurocode 3, (1992), Design of steel structures, Part 1.1: General rules for buildings. European Committee for standardization, Draft Document ENV 1993-1-1, Brussels
  5. Hibbit, Karlsson and Sorensen Inc (2003), Abaqus Standard User's Manuel, Version 6.4. Abaqus, Pawtucket, RI, USA
  6. Laudiero, F. and Zaccaria, D. (1988), 'A consistent approach to linear stability of thin-walled beams of open section', Int. J. Mech. Sci., 30, 503-515 https://doi.org/10.1016/0020-7403(88)90004-5
  7. Mohri, F., Azrar, L. and Potier-Ferry, M. (2001), 'Flexural-torsional post-buckling analysis of thin-walled elements with open sections', Thin-Walled Structures, 39, 907-938 https://doi.org/10.1016/S0263-8231(01)00038-6
  8. Mohri, F., Azrar, L. and Potier-Ferry, M. (2002), 'Lateral post-buckling analysis of thin-walled open section beams', Thin-Walled Structures, 40, 1013-1036 https://doi.org/10.1016/S0263-8231(02)00043-5
  9. Mohri, F., Brouki, A. and Roth, J. C. (2003), 'Theoretical and numerical stability analyses of unrestrained monosymmetric thin-walled beams', J. Contruct. Steel Res., 59, 63-90 https://doi.org/10.1016/S0143-974X(02)00007-X
  10. Pi, Y. L. and Bradford, M. A. (2001), 'Effects of approximations in analyses of beams of open thin-walled cross-section, Part I: Flexural-torsional stability', Int. J. Numer. Methods Eng., 51, 757-772 https://doi.org/10.1002/nme.155.abs
  11. Roberts, T. M. and Burt, C. A. (1985), 'Instability of mono symmetric beams and cantilevers', Int. J. Mech. Sci., 27(5), 313-324 https://doi.org/10.1016/0020-7403(85)90021-9
  12. Ronagh, H. R., Bradford, M. A. and Attard, M. M. (2000), 'Non-linear analysis of thin-walled members of variable cross-section, Part II: Application', Comput. Struct., 77, 301-313 https://doi.org/10.1016/S0045-7949(99)00224-2
  13. Timoshenko, S. P. and Gere, J. M. (1961), Theory of Elastic Stability, 2nd edition, McGraw Hill, NY
  14. Trahair, N. S. (1993), Flexural-Torsional Buckling of Structures, Chapman & Hall, London
  15. Vacharajittiphan, P., Woolcock, S. T. and Trahair, N. S. (1974), 'Effect of in-plane deformation on lateral buckling', J. Struct. Mech., ASCE, 3(11), 29-60 https://doi.org/10.1080/03601217408907255

피인용 문헌

  1. Lateral buckling of shear deformable laminated composite I-beams using the finite element method vol.68, 2013, https://doi.org/10.1016/j.ijmecsci.2013.01.023
  2. Natural frequencies and buckling of compressed non-symmetric thin-walled beams vol.111, 2017, https://doi.org/10.1016/j.tws.2016.11.021
  3. Effect of Eccentric Lateral Bracing Stiffness on Lateral Torsional Buckling Resistance of Wooden Beams vol.18, pp.02, 2018, https://doi.org/10.1142/S021945541850027X
  4. Lateral buckling of thin-walled beam-column elements under combined axial and bending loads vol.46, pp.3, 2008, https://doi.org/10.1016/j.tws.2007.07.017
  5. Large torsion analysis of thin-walled open sections beams by the Asymptotic Numerical Method vol.81, 2014, https://doi.org/10.1016/j.engstruct.2014.09.045
  6. A beam finite element for non-linear analyses of thin-walled elements vol.46, pp.7-9, 2008, https://doi.org/10.1016/j.tws.2008.01.028
  7. Buckling and lateral buckling interaction in thin-walled beam-column elements with mono-symmetric cross sections vol.37, pp.5, 2013, https://doi.org/10.1016/j.apm.2012.07.053
  8. Investigation of innovative steel runway beam in industrial building vol.40, pp.7, 2015, https://doi.org/10.1007/s12046-015-0406-2
  9. Stability analysis of thin-walled beams with open section subject to arbitrary loads vol.105, 2016, https://doi.org/10.1016/j.tws.2016.04.008
  10. Lateral Torsional Buckling of Wooden Beams with Midspan Lateral Bracing Offset from Section Midheight vol.143, pp.11, 2017, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001359
  11. Pre-buckling deflection effects on stability of thin-walled beams with open sections vol.13, pp.1, 2012, https://doi.org/10.12989/scs.2012.13.1.071