DOI QR코드

DOI QR Code

Bond mechanism effect on the flexural behavior of steel reinforced concrete composite members

  • Juang, Jia-Ling (Department of Civil Engineering, National Central University) ;
  • Hsu, Hsieh-Lung (Department of Civil Engineering, National Central University)
  • 투고 : 2005.07.06
  • 심사 : 2006.03.27
  • 발행 : 2006.10.25

초록

This paper discusses the composite mechanism and its effect upon the behavior of a steel reinforced concrete (SRC) member subjected to a flexural load. The relationship between member strength and deformation is established using the bond strength between the steel and reinforced concrete. An analytical model is proposed and used to incorporate the sectional strains and bond strength at the elastic and inelastic stages for moment-curvature relationship derivation. The results from the flexural load tests are used to validate the accuracy of the proposed model. Comparisons between the experimental information and the analytical results demonstrate close moment-curvature relevance, which justifies the applicability of the proposed method.

키워드

참고문헌

  1. American Concrete Institute (ACI). (2002), Buildings Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 3I8R-02). Farmington Hills, Michigan
  2. Bryson, J. O. and Mathey, R. G. (1962), 'Surface condition effect on bond strength of steel beams embedded in concrete', J. Am. Concrete Inst., 59(3), 397-405
  3. El-Tawil, S. and Deierlein, G. G. (1999), 'Strength and ductility of concrete encased composite columns', J. Struct. Eng., 125(9), 1009-1019 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(1009)
  4. Hsu, H. L. and Wang, C. L. (2000), 'Flexural-torsional behaviour of steel reinforced concrete members subjected to repeated loading', Earthq. Eng. Struct. Dyn., 29(5), 667-682 https://doi.org/10.1002/(SICI)1096-9845(200005)29:5<667::AID-EQE930>3.0.CO;2-Y
  5. Kwak, H. G. and Kim, S. P. (2001), 'Bond-slip behavior under monotonic uniaxial loads', Eng. Struct., 23(3), 298-309 https://doi.org/10.1016/S0141-0296(00)00008-0
  6. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, Wiley, NY
  7. Paulay, T. and Priestley, M. J. N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley, NY
  8. Ricles, J. M. and Paboojian, S. D. (1994), 'Seismic performance of steel-encased composite columns', J. Struct. Eng., 120(8), 2474-2494 https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2474)
  9. Roeder, C. W., Chmielowski, R. and Brown, C. B. (1999), 'Shear connector requirements for embedded steel sections', J. Struct. Eng., 125(2), 142-151 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:2(142)
  10. Yalcin, C. and Saatcioglu, M. (2000) 'Inelastic analysis of reinforced concrete columns', Comput. Struct., 77(6) 539-555 https://doi.org/10.1016/S0045-7949(99)00228-X
  11. Weng, C. C., Yen, S. I. and Chen, C. C. (2001), 'Shear-strength of concrete-encased composite structural members', J. Struct. Eng., 127(10), 1190-1197 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:10(1190)
  12. Weng, C. C., Yen, S. I. and Jiang, M. H. (2002), 'Experimental study on shear splitting failure of full-scale composite concrete encased steel beams', J. Struct. Eng., 128(9), 1186-1194 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1186)

피인용 문헌

  1. A Novel Seismic Design Strategy for Structures With Complex Geometry vol.14, pp.sup1, 2010, https://doi.org/10.1080/13632461003651901
  2. Cyclic Behavior of Diagrid Nodes with H -Section Braces vol.136, pp.9, 2010, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000203
  3. Investigation of bond behavior between lightweight aggregate concrete and steel rebar using bending test vol.8, pp.4, 2006, https://doi.org/10.12989/cac.2011.8.4.465