Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Experimental study on seismic performance of concrete filled tubular square column-to-beam connections with combined cross diaphragm

  • Choi, Sung-Mo (School of Architecture and Architectural Engineering, University of Seoul) ;
  • Yun, Yeo-Sang (Harmony Structural Engineering) ;
  • Kim, Jin-Ho (Research Institute of Indurstrial Science & Technology Steel Structure Research Laboratory)
  • Received : 2005.04.20
  • Accepted : 2006.02.14
  • Published : 2006.08.25
⟨ Previous Next ⟩

Abstract

The connection with combined cross diaphragm is developed for the connection of square CFT column and steel beam and proposed to be used for the frame with asymmetric span length. The structural characteristics of this connection lie in the penetration of the beam flange in the direction of major axis through the column for the smooth flow of stress. The purpose of this study is to analyze the dynamic behavior and stress flow of suggested connection and to evaluate the resistance to shock of connection. Four T-type CFT column-to-beam specimens; two with combined cross diaphragm and the others with interior and through diaphragms, the existing connection types, were made for cyclic load test guided by the load program of ANSI/AISC SSPEC 2002. The results show that the proposed connection is more efficient than existing ones in terms of strength, stress flow and energy absorption and satisfies the seismic performance required in the region of weak/moderate earthquakes.

Keywords

References

  1. Alostaz, Y. M. and Schneider, S. P. (1996), 'Analytical behavior of connections to concrete-filled steel tubes', J Construct. Steel Res., 40(2), 95-127 https://doi.org/10.1016/S0143-974X(96)00047-8
  2. American Institute of Steel Construction, Inc (2000), Seismic Provisions for Structural Steel Buildings. Supplement No.2, Part n, Chapter 9
  3. American Institute of Steel Construction, Inc (2002), Seismic Provisions for Structural Steel Buildings. Supplement No.2, Part I, Appendix S
  4. Beutel, J., Thambiratnam. D. and Perera, N. (2001), 'Monotonic behavior of composite column to beam connections', Eng. Struct., 23, 1152-1161 https://doi.org/10.1016/S0141-0296(01)00002-5
  5. Beutel, J., Thambiratnam. D. and Perera, N. (2002), 'Cyclic behavior of concrete filled steel tubular column to steel beam connections', Eng. Struct., 24(1), 29-38 https://doi.org/10.1016/S0141-0296(01)00083-9
  6. Cha, E. J., Kim, Y. S., Kim, J. H. and Choi, S. M. (2002), 'Reliability analysis for CFT column-to-beam connections with new diaphragm', Proc. of Int. Symp. on Steel Structures: The Second, Korean Society of Steel Structures, 103-114
  7. Cheng, C. T. and Chung, L. L. (2003), 'Seismic performance of steel beams to concrete-filled steel tubular column connections', J Construct. Steel Res., 59(3),405-426 https://doi.org/10.1016/S0143-974X(02)00033-0
  8. Chi, B. and Dang, C. M. (2002), 'Cyclic response and design recommendations of reduced beam section moment connections with deep columns', J Struct. Eng., ASCE, 128(4), 464-473 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(464)
  9. Choi, S. M. and Kim, D. K. (2002), 'CFT Standard (2000 Edition) and Development on CFT Connections in Korea', 7th Int. Conf on Steel & Space Structures: 2-3 October, Singapore, 9-18
  10. Choi, S. M., Hong, S. D., Kim, D. K., Kim, Y. S. and Kim, J. H. (2004), 'Structural capacities of tension side for CFT square column-to-beam connections with combined-cross-diaphragm', Pacific Structural Steel Corference
  11. Choi, S. M., Hong, S. D., Kim, Y. S. and Kim, J. H. (2004), 'Structural performance of tension side for CFT square column-to-beam connections with combined cross diaphragm', Architectural Institute of Korea, 23-32
  12. Choi, S. M., Jung, D. S., Kim, D. J., Kim, J. H. (2005), 'A study on the equations for load carrying capacities of concrete filled tubular square column-to-beam connections with combined cross diaphragm and sleeves', Korean Society of Steel Construction, 419-429
  13. Choi, S. M., Yun, Y. S., Kim, D. K., Kim, Y. S. and Kim, J. H. (2004), 'An experimental study on seismic performance of concrete filled tubular square column-to-beam connections with combined cross diaphragm', Pacific Structural Steel Conference
  14. Choi, S. M., Yun, Y. S., Kim, Y. S. and Kim, J. H. (2003), 'A study on seismic performance for CFT square column-to-beam connections reinforced with asymmetric lower diaphragms', Korean Society of Steel Construction, 579-589
  15. Choi, S. M., Yun, Y. S., Kim, Y. S. and Kim, J. H. (2004), 'An experimental study on seismic performance of concrete filled tubular square column-to-beam connections with combined cross diaphragm', Architectural Institute of Korea, 33-40
  16. Chou, C. C. and Dang, C. M. (2002), 'Cyclic performance of a type of steel beam to steel-encased reinforced concrete column moment connections', J Construct. Steel Res., 58(5-8), 637-663 https://doi.org/10.1016/S0143-974X(01)00089-X
  17. Han, L. (2000), 'Influence of concrete compaction on the strength of concrete filled steel tubes', Advance Structure Engineering, 32, 131-137
  18. Hiroyuki, N. (1998), 'Analytical model for compressive behavior of concrete filled square steel tubular columns', Trans. Jpn. Concr. Inst. 20, 171-178
  19. Hong, S. D., Kim, Y. S., Kim, J. H. and Choi, S. M. (2002), 'Simple tension testing for CFT column-to-beam connections at tension side with new diaphragm', Proc. of Int. Symp. on Steel Structure: The Second, Korean Society of Steel Structure, 405-416
  20. Kato, B. (1992), 'Connection of beam flange to concrete-filled tubular column', In: Composite Construction in Steel and Concrete II - Proc. of an Engineering Foundation Conf, Missouri: 528-558
  21. Mohammad, S. (1997), 'State of the art of concrete-filled steel tubular columns', ACI Struct. J 94,558-571
  22. SAC Joint Venture (2000a), 'Recommended seismic design criteria for new steel moment frame buildings', Rep. No. FEMA-350, Federal Emergency Management Agency, Washington, D.C.
  23. Schneider, S. P. and Alostaz, Y. M. (1998), 'Experimental behavior of connections to concrete-filled steel tubes', J. Construct. Steel Res., 45(3), 321-352 https://doi.org/10.1016/S0143-974X(97)00071-0
  24. Storozhenko, L. Butsky, V. and Taranovsky, O. (1998), 'Stability of compressed steel concrete composite tubular columns with centrifuged cores', J. Construct. Steel Res., 46(1-3), pp. 484 https://doi.org/10.1016/S0143-974X(98)00089-3
  25. Wang, Y. C. (1997), 'Some considerations in the design of unprotected concrete-filled steel tubular columns under fire conditions', J. Construct. Steel Res., 44, 203-223 https://doi.org/10.1016/S0143-974X(97)00060-6
  26. Yun, Y. S., Kim, Y. S., Kim, J. H. and Choi, S. M. (2002), 'Cyclic testing for CFT column-to-beam connections with new diaphragm', Proc. of Int. Symp. on Steel Structures: The Second, Korean Society of Steel Structures, 440-451
  27. Yun, Y. S., Kim, Y. S., Kim, J. H. and Choi, S. M. (2005), 'A study on seismic performance for CFT square column-to-beam connections reinforced with asymmetric lower diaphragms', Proc. of Int. Symp. on Steel Structures : The Third, Korean Society of Steel Structures, 409-421

Cited by

  1. Test of extended thick-walled through-diaphragm connection to thick-walled CFT column vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.001
  2. A study on the seismic performance of concrete-filled square steel tube column-to-beam connections reinforced with asymmetric lower diaphragms vol.66, pp.7, 2010, https://doi.org/10.1016/j.jcsr.2010.01.004
  3. Hysteresis behavior of concrete filled square steel tube column-to-beam partially restrained composite connections vol.66, pp.7, 2010, https://doi.org/10.1016/j.jcsr.2010.01.006
  4. Tensile strength and concrete cone failure in CFT connection with internal diaphragms vol.17, pp.2, 2017, https://doi.org/10.1007/s13296-017-6021-9
  5. Structural characteristics of welded built-up square CFT column-to-beam connections with external diaphragms vol.10, pp.3, 2010, https://doi.org/10.12989/scs.2010.10.3.261
  6. Seismic Evaluation of Welded-formed square Column-Beam Connection for External Diaphragm Stress path vol.26, pp.4, 2014, https://doi.org/10.7781/kjoss.2014.26.4.311