DOI QR코드

DOI QR Code

Behaviour of cold-formed steel concrete infilled RHS connections and frames

  • Angeline Prabhavathy, R. (College of Engineering, Guindy, Anna University) ;
  • Samuel Knight, G.M. (College of Engineering, Guindy, Anna University)
  • 투고 : 2004.09.15
  • 심사 : 2005.06.07
  • 발행 : 2006.02.25

초록

This paper presents the results of a series of tests carried out on cold-formed steel rectangular hollow and concrete infilled beam to column connections and frames. A stub column was chosen such that overall buckling does not influence the connection behaviour. The beam chosen was a short-span cantilever with a concentrated load applied at the free end. The beam was connected to the columns along the strong and weak axes of columns and these connections were tested to failure. Twelve experiments were conducted on cold-formed steel direct welded tubular beam to column connections and twelve experiments on connections with concrete infilled column subjected to monotonic loading. In all the experiments conducted, the stiffness of the connection, the ductility characteristics and the moment rotation behaviour were studied. The dominant mode of failure in hollow section connections was chord face yielding and not weld failure. Provision of concrete infill increases the stiffness and the ultimate moment carrying capacity substantially, irrespective of the axis of loading of the column. Weld failure and bearing failure due to transverse compression occurred in connections with concrete infilled columns. Six single-bay two storied frames both with and without concrete infill, and columns loaded along the major and minor axes were tested to failure. Concentrated load was applied at the midspan of first floor beam. The change in behaviour of the frame due to provision of infill in the column and in the entire frame was compared with hollow frames. Failure of the weld at the junction of the beam occurred for frames with infilled columns. Design expressions are suggested for the yielding of the column face in hollow sections and bearing failure in infilled columns which closely predicted the experimental failure loads.

키워드

참고문헌

  1. Angeline Prabhavathy, R., Samuel Knight, GM. and Rajaraman, A. (2003), 'Flexibility of beam to column connections in hollow construction', Proc. of the Int. Conf. on ADVANCES IN STRUCTURES (ASSCCA'03), Sydney, Australia, JUNE, 961-965
  2. Beutel, J.G Thambiratnam, D.P. and Perera, N.J. (2001), 'Monotonic behaviour of composite beam-column connections', J. Eng Struct., 23(9),1152-1161 https://doi.org/10.1016/S0141-0296(01)00002-5
  3. Beutel, J.G Thambiratnam, D.P. and Perera, N.J. (2002), 'Cyclic behaviour of composite beam column connections', J. Eng Struct., 24(1), 29-38 https://doi.org/10.1016/S0141-0296(01)00083-9
  4. Cao, J.J., Packer, J.A. and Yang, C.J. (1998), 'Yield line analysis of RHS connections with axial loads', J. Constr. Steel Res., 48, 1-25 https://doi.org/10.1016/S0143-974X(98)90143-2
  5. Kosteski, N., Packer, J.A. and Puthli, R.S. (2003), 'A finite element method based yield load determination procedure for hollow structural steel connections', J. Constr. Steel Res, 59, 453-471
  6. Nayak, A.N. and Bhattacharyya, S.K. (1998), 'Welded T-joints with hollow sections: An experimental study,' Int. J Struct., 18(1), 29-50
  7. Packer, J.A. and Cassidy, C.E. (1995), 'Effective weld length for HSS T,Y and X connections', J. Struct. Eng, ASCE, 121(10), 1402-1408 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:10(1402)
  8. Packer, J.A. and Fear, C.E. (1991), 'Concrete-filled rectangular hollow section X and T connections', Proc. the 4th Int. Symp. on Tubular Structures, Delft, The Netherlands, 382-391
  9. Packer, J.A. and Henderson, J.E. (1992), Design Guide for Hollow Structural Section Connections, Canadian Institute of Steel Construction, Canada
  10. Wilkinson, T. and Hancock, G.J. (2000), 'Tests to examine plastic behaviour of knee joints in cold-formed RHS', J. Struct. Eng, ASCE, 126(3), 297-305 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(297)
  11. Zhao, X.L. and Hancock, GJ. (1991), 'T-joints in rectangular hollow sections subject to combined actions', J. Struct. Eng, ASCE, 117(8),2258-2277 https://doi.org/10.1061/(ASCE)0733-9445(1991)117:8(2258)
  12. Zhao, X.L. (2000), 'Deformation limit and ultimate strength of welded T joints in cold-formed rectangular hollow section', J. Constr. Steel Res., 53, 149-165 https://doi.org/10.1016/S0143-974X(99)00063-2
  13. Zhao, X.L. and Grzebieta, R. (1999), 'Void-filled SHS beams subjected to large deformation cyclic bending', J. Struct. Eng, ASCE, 125(9), 1020-1027 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(1020)
  14. Zhao, X.L., Riadh, AI-Mahaidi and Kiew, K.P. (1999), 'Longitudinal fillet welds in thin-walled C450 RHS members', J. Struct. Eng, ASCE, 125(8), 821-828 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:8(821)

피인용 문헌

  1. Evaluation of energy response of space steel frames subjected to seismic loads vol.54, pp.4, 2015, https://doi.org/10.12989/sem.2015.54.4.809
  2. Test of extended thick-walled through-diaphragm connection to thick-walled CFT column vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.001
  3. Behaviour of bolted connections in concrete-filled steel tubular beam-column joints vol.25, pp.4, 2006, https://doi.org/10.12989/scs.2017.25.4.443
  4. Experimental and Numerical Investigations of Bolted CFST Beams-CFST Columns Connections vol.43, pp.3, 2006, https://doi.org/10.1007/s40996-018-0195-z