DOI QR코드

DOI QR Code

Artificial neural network model for the strength prediction of fully restrained RC slabs subjected to membrane action

  • Hossain, Khandaker M.A. (Dept. of Civil Engineering, Ryerson University) ;
  • Lachemi, Mohamed (Dept. of Civil Engineering, Ryerson University) ;
  • Easa, Said M. (Dept. of Civil Engineering, Ryerson University)
  • 투고 : 2006.09.12
  • 심사 : 2006.12.18
  • 발행 : 2006.12.25

초록

This paper develops an artificial neural network (ANN) model for uniformly loaded restrained reinforced concrete (RC) slabs incorporating membrane action. The development of membrane action in RC slabs restrained against lateral displacements at the edges in buildings and bridge structures significantly increases their load carrying capacity. The benefits of compressive membrane action are usually not taken into account in currently available design methods based on yield-line theory. By extending the existing knowledge of compressive membrane action, it is possible to design slabs in building and bridge decks economically with less than normal reinforcement. The processes involved in the development of ANN model such as the creation of a database of test results from previous research studies, the selection of architecture of the network from extensive trial and error procedure, and the training and performance validation of the model are presented. The ANN model was found to predict accurately the ultimate strength of fully restrained RC slabs. The model also was able to incorporate strength enhancement of RC slabs due to membrane action as confirmed from a comparative study of experimental and yield line-based predictions. Practical applications of the developed ANN model in the design process of RC slabs are also highlighted.

키워드

참고문헌

  1. Adeli, H. and Park, H. S. (1995), 'A neural dynamic model for structural optimization-theory', Comput. Struct., 57(3), 383-390 https://doi.org/10.1016/0045-7949(95)00048-L
  2. Chen, H. M., Tsai, K. H., Qi, G. Z., Yang, C. S., and Amini, F. (1995), 'Neural network for structure control', J. Comput. Civ. Eng., 9(2), 168-176 https://doi.org/10.1061/(ASCE)0887-3801(1995)9:2(168)
  3. Chen, Y., Yang, B. Dong, J. and Abraham, A. (2005), 'Time-series forecasting using flexible neural tree model', Information Sciences, 174(3-4), 219-235 https://doi.org/10.1016/j.ins.2004.10.005
  4. Das, S.K. (2001), 'Compressive Membrane action in circular reinforced concrete slabs', Masters Dissertation, Dept. Engineering, University of Cambridge, UK
  5. Eyre, J.R. (1997), 'Direct assessment of safe strengths of RC slabs under membrane action', J. Struct. Eng., 123(10), 1331-1338 https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1331)
  6. Ghaboussi, J., Garret, J. H., Jr., and Wu, X. (1991), 'Knowledge-Based Modeling of Material Behavior with Neural Networks'. J. Eng. Mech., ASCE, 117(1), 132-153 https://doi.org/10.1061/(ASCE)0733-9399(1991)117:1(132)
  7. Hopfield, J. J., (1982), 'Neural networks and physical systems with emergent collective computational abilities', Proceedings of the National Academy of Science of the United States of America, 79, 2554-2558
  8. Hossain, K.M.A. and Olufemi, O.O. (2004), 'Computational optimization of a concrete model to simulate membrane action in RC slabs', Comput. Concrete, 1(3), 52-82
  9. Hossain, K.M.A. and Iatipu A. (2000), 'Experimental study on RC slabs restrained on four sides', Research report No. CE-SE-2000-4, Dept. of Civil Engineering, University of Technology, Papua New Guinea, 150 p
  10. Huang, Z., Burgess, I.W., and Plank, R.J. (2003a), 'Modeling Membrane Action of Concrete Slabs in Composite Buildings in Fire. I: Theoretical Development', J. Struct. Eng., 129(8), 1093-1102 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1093)
  11. Huang, Z., Burgess, L.W., and Plank, R.J. (2003b), 'Modeling Membrane Action of Concrete Slabs in Composite buildings in fire. II: Validations', J. Struct. Eng., 129(8), 1103-1112 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1103)
  12. Hung, T.Y. and Nawy, E.G. (1971), 'Limit strength and serviceability factors in uniformly loaded, iso-tropically reinforced two way slabs', ACI, Detroit, ACI SP-30, 301-324
  13. Johansen, K.W. (1962), Yield-line theory. Cement and Concrete Association, London, United Kingdom
  14. Keenan, W.A. (1969), 'Strength and behaviour of restrained reinforced concrete slabs under static and dynamic loadings', Technical Report R621, U.S. Naval Civil Engineering Laboratory, Port Hueneme, California, 133p
  15. Kirkpatrick, J. et al. (1984), Strength evaluation of M-beam bridge deck slabs. The Structural Engineer, 62B(3), 60-68
  16. Lee, S.C., Park, S.W. and Lee, B.H. (2001), 'Development of the approximate analytical model for the stubgirder system using neural networks', Comput. Struct., 79(10), 1013-1025 https://doi.org/10.1016/S0045-7949(00)00199-1
  17. Leet, K.M. and Bernal, D. (1996), Reinforced Concrete Design, 3rd Edition, Mcgraw-Hill, New York
  18. MATLAB (2004), Neural Network Tool Box for Use with MATLAB Version 4.04. The Math Works Inc., USA
  19. Moy, S.S.J. and Mayfield, B. (1972), 'Load-deflection characteristics of rectangular reinforced concrete slabs', Mag. Concrete Res., 24(81), 62-71
  20. Nehdi, M., Djebbar, Y., and Khan, A. (2001), 'A neural network model for preformed-foam cellular concrete', ACI Mater. J., 98(5), 402-409
  21. Niblock, R.A. (1986), 'Compressive membrane action and the ultimate capacity of uniformly loaded reinforced concrete slabs', PhD thesis, The Queen's University of Belfast, United Kingdom
  22. Ockleston, A.E. (1955), 'Load tests on a three storey reinforced concrete building in johannesburg', The Struct. Eng., 33, 304-322
  23. Oh, J.W., Kim, J.T., and Lee, G.W. (1999), 'Application of Neural Networks for Proportioning of Concrete Mixes', ACI Mater. J., 96(1), 61-67
  24. Pal, C., Hagiwara, I., Kayaba, N., and Morishita, S. (1994), 'Dynamic system identification by neural network: A new, fast learning method based on error back propagation', J. Intelligent Mater. Syst. Struct., 5(1), 127-135 https://doi.org/10.1177/1045389X9400500116
  25. Park, R. (1964a), 'The ultimate strength and long-term behaviour of uniformly loaded, two-way concrete slabs with partial lateral restraint at all edges', Mag. Concrete Res., 16(48), 139-152 https://doi.org/10.1680/macr.1964.16.48.139
  26. Park, R. (1964b), 'Ultimate strength of rectangular concrete slabs under short-term uniform loading with edges restrained against lateral movement.', Proceedings of the Institution of Civil Engineers, 28, 125-150
  27. Powell, D.S. (1956), Ultimate Strength of Concrete Panels Subjected to Uniformly Distributed Loads. Cambridge University Thesis, United Kingdom
  28. Ranjithan, S. and Eheart, J.W. (1993), 'Neural network-based screening for groundwater reclamation under uncertainty', Water Resources Research, 29(3), 563-574 https://doi.org/10.1029/92WR02129
  29. Rankin, G.B., Taylor, S.E., and Cleland, D.J. (1991), 'Compressive membrane action strength enhancement in uniformly loaded laterally restrained slabs', The Structural Engineer, 69(16), 287-295
  30. Rankin, G.I.B., Taylor, S.E. and Cleland, D.J. (1999), A guide to Compressive Membrane Action in Bridge Deck Slabs. Design guide for the Concrete Bridge Development Group, British Cement Association
  31. Rosenblatt, F. (1962), Principles of Neurodynamics. Spartan, New York
  32. Rumelhart, D.E and Zipser, D. (1985), 'Feature discovery by competitive learning', Cognitive Science, 9, 75-112 https://doi.org/10.1016/S0364-0213(85)80010-0
  33. Rumelhart, D.E., Hinton, G.E., and William, R.J. (1986), 'Learning Internal Representations by Error Propagation. Parallel Distributed Processing', V. 1: Foundations, D.E. Rumelhart and lL. McClelland, eds., MIT Press, Cambridge, Mass., pp. 318-362
  34. Skates, A.S. (1986), 'Development of a design method for restrained concrete slab systems subject to concentrated and uniform loading', PhD Thesis, The Queen's University of Belfast, United Kingdom
  35. Taylor, S.E. (2000), 'Compressive membrane action in high strength concrete bridge deck slabs', PhD thesis, Queen's University of Belfast, United Kingdom
  36. Whitney, C.S. (1937), 'Design of reinforced concrete members under flexure or combined flexure and direct compression', J. American Concrete Institute, 33, 483-498
  37. Wood, R.H. (1961), Plastic and Elastic Design of Slabs and Plates, Thames and Hudson, London, 344p
  38. Wu, X., Ghaboussi, J., and Garrett, J.H., Jr. (1992), 'Use of neural networks in detection of structural damage', Comput. Struct., 42(4), 649-659 https://doi.org/10.1016/0045-7949(92)90132-J

피인용 문헌

  1. Polynomial modeling of confined compressive strength and strain of circular concrete columns vol.11, pp.6, 2013, https://doi.org/10.12989/cac.2013.11.6.603
  2. Investigation on correlation between pulse velocity and compressive strength of concrete using ANNs vol.4, pp.6, 2007, https://doi.org/10.12989/cac.2007.4.6.477
  3. Prediction of product parameters of fly ash cement bricks using two dimensional orthogonal polynomials in the regression analysis vol.5, pp.5, 2008, https://doi.org/10.12989/cac.2008.5.5.449
  4. Modeling shear strength of medium- to ultra-high-strength steel fiber-reinforced concrete beams using artificial neural network vol.28, pp.S1, 2017, https://doi.org/10.1007/s00521-016-2417-2
  5. Predictive Ability of Improved Neural Network Models to Simulate Pollutant Dispersion vol.2014, 2014, https://doi.org/10.1155/2014/141923
  6. Modeling the Fresh and Hardened Stage Properties of Self-Compacting Concrete using Random Kitchen Sink Algorithm vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0246-7
  7. Modeling the effects of additives on rheological properties of fresh self-consolidating cement paste using artificial neural network vol.8, pp.3, 2006, https://doi.org/10.12989/cac.2011.8.3.279
  8. Knowledge-based learning for modeling concrete compressive strength using genetic programming vol.23, pp.4, 2006, https://doi.org/10.12989/cac.2019.23.4.255