DOI QR코드

DOI QR Code

A mortar mix proportion design algorithm based on artificial neural networks

  • Ji, Tao (College of Civil Engineering, Fuzhou University) ;
  • Lin, Xu Jian (College of Civil Engineering, Fuzhou University)
  • 투고 : 2006.03.22
  • 심사 : 2006.08.28
  • 발행 : 2006.10.25

초록

The concepts of four parameters of nominal water-cement ratio, equivalent water-cement ratio, average paste thickness, fly ash-binder ratio were introduced. It was verified that the four parameters and the mix proportion of mortar can be transformed each other. The behaviors (strength, workability, et al.) of mortar primarily determined by the mix proportion of mortar now depend on the four parameters. The prediction models of strength and workability of mortar were built based on artificial neural networks (ANNs). The calculation models of average paste thickness and equivalent water-cement ratio of mortar can be obtained by the reversal deduction of the two prediction models, respectively. A mortar mix proportion design algorithm was proposed. The proposed mortar mix proportion design algorithm is expected to reduce the number of trial and error, save cost, laborers and time.

키워드

참고문헌

  1. Akkurt, S., Ozdemir, S., Tayfur, G. and Akyol, B. (2003), 'The use of GA-ANNs in the modelling of compressive strength of cement mortar', Cement Concrete Res., 33, 973-979 https://doi.org/10.1016/S0008-8846(03)00006-1
  2. Akkurt, S., Tayfur, G. and Can, S. (2004), 'Fuzzy logic model for the prediction of cement compressive strength', Cement Concrete Res., 34, 1429-1433 https://doi.org/10.1016/j.cemconres.2004.01.020
  3. Appa Rao, G. (2003), 'Investigations on the performance of silica fume-incorporatedcement pastes and mortars', Cement Concrete Res., 33, 1765-1770 https://doi.org/10.1016/S0008-8846(03)00171-6
  4. ASTM C 150 (1993), 'Standard specification for Portland cement, in: Annual Book of ASTM Standards, vol.04.01', American Society for Testing and Materials (ASTM), Philadelphia
  5. Baykasogulu, A., Dereli, T. and Tanys, S. (2004), 'Prediction of cement strength using soft computing techniques', Cement Concrete Res., 34, 2083-2090 https://doi.org/10.1016/j.cemconres.2004.03.028
  6. Chinese Standard JGJ 98-2000 (2001), 'Specification for mix proportion design of masonry mortar', Beijing
  7. Chinese Standard GBJ 146-90 (1990), 'Specification of application and techniques for fly ash mortar', Beijing
  8. Chinese Standard JGJ70-90 (1990), 'Test method for the foundational behaviors of building mortar', Beijing
  9. Chindaprasirt, P., Homwuttiwong, S., Sirivivatnanon, V. (2004), 'Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar', Cement Concrete Res., 34, 1087-1092 https://doi.org/10.1016/j.cemconres.2003.11.021
  10. de Siquera Tango, C.E. (1998), 'An extrapolation method for compressive strength prediction of hydraulic cement products', Cement Concrete Res., 28, 969-983 https://doi.org/10.1016/S0008-8846(98)00074-X
  11. European Committee for Standardization (CEN) (2000), 'Cement Part 1: Composition, specification and conformity criteria for common cements', European Standard EN 197-1
  12. Fa-Liang, G. (1997), 'A new way of predicting cement strength-fuzzy logic', Cement Concrete Res., 27, 883-888 https://doi.org/10.1016/S0008-8846(97)00081-1
  13. Ferreira, C. (2001), 'Gene expression programming: a new adaptive algorithm for solving problems', Complex Syst, 13(2), 87-129
  14. Goltermann, P., Johansen, V. and Palbal, L. (1997), 'Packing of aggregate: an alternative tool to determine the optimal aggregate', ACI Mater. J., 94(5), 435-443
  15. Haykin, S. (1994), 'Neural networks: a comprehensive foundation', Macmillan, New York
  16. Jenni, A., Zurbriggen, R., Holzer, L. and Herwegh, M. (2006), 'Changes in microstructures and physical properties of polymer-modified mortars during wet storage', Cement Concrete Res., 36, 79-90 https://doi.org/10.1016/j.cemconres.2005.06.001
  17. Ji, T, Lin, T.W. and Lin, X.J. (2006), 'A concrete mix proportion design algorithm based on artificial neural networks' Cement Concrete Res., 36, 1399-1408 https://doi.org/10.1016/j.cemconres.2006.01.009
  18. Li, G.Y. and Wu, X.Z. (2005), 'Influence of fly ash and its mean particle size on certain engineering properties of cement composite mortars', Cement Concrete Res., 35, 1128-1134 https://doi.org/10.1016/j.cemconres.2004.08.014
  19. Lu, Z.Y., Zhou, X.H. and Zhang, J.Y. (2004), 'Study on the performance of a new type of water-repellent admixture for cement mortar', Cement Concrete Res., 34, 2015-2019 https://doi.org/10.1016/j.cemconres.2004.02.019
  20. Maltese, C., Pistolesi, C., Lolli, A., Bravo, A., Cerulli, T. and Salvioni, D. (2005), 'Combined effect of expansive and shrinkage reducing admixtures to obtain stable and durable mortars', Cement Concrete Res., 35, 2244-2251 https://doi.org/10.1016/j.cemconres.2004.11.021
  21. Norgaard M. (2000), 'Neural network based system identification toolbox', Tech. Report. 00-E-891, Department of Automation, Technical University of Denmark
  22. Puertas, F., Amat, T., Fernandez-Jimenez, A. and Vazquez, T. (2003), 'Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres', Cement Concrete Res., 33, 2031-2036 https://doi.org/10.1016/S0008-8846(03)00222-9
  23. Tsivilis, S. and Parissakis, G. (2005), 'A mathematical-model for the prediction of cement strength', Cem. Concr. Res., 35, 9-14
  24. Wu, B., Huang, X.J. and Lu, J.Z. (2005), 'Biaxial compression in carbon-fiber-reinforced mortar, sensed by electrical resistance measurement', Cement Concrete Res., 35, 1430-1434 https://doi.org/10.1016/j.cemconres.2004.07.023
  25. Xiong, G.J., Chen, L.Q., Chen, X.H., Yang, J.Z. and Li, G.Y. (2004), 'Behavior of water glass-polymer hybrid-modified mortars under flowing sulfuric acid solution environment', Cement Concrete Res., 34, 665-669 https://doi.org/10.1016/j.cemconres.2003.10.016
  26. Zupan, J. and Gasteiger, J. (1993), Neural Networks for Chemists, VCH, Weinheim, Germany

피인용 문헌

  1. Prediction of workability of concrete using design of experiments for mixtures vol.5, pp.1, 2008, https://doi.org/10.12989/cac.2008.5.1.001
  2. Comparison of artificial neural networks and general linear model approaches for the analysis of abrasive wear of concrete vol.25, pp.8, 2011, https://doi.org/10.1016/j.conbuildmat.2011.03.040
  3. A comparative modeling study to estimate wear of concrete vol.24, pp.3-4, 2014, https://doi.org/10.1007/s00521-012-1277-7
  4. Modeling of Thermal Conductivity of Concrete with Vermiculite by Using Artificial Neural Networks Approaches vol.26, pp.4, 2013, https://doi.org/10.1080/08916152.2012.669810
  5. Modeling properties of self-compacting concrete: support vector machines approach vol.5, pp.5, 2008, https://doi.org/10.12989/cac.2008.5.5.461