DOI QR코드

DOI QR Code

Effect of axial load on flexural behaviour of cyclically loaded RC columns

  • Au, F.T.K. (Department of Civil Engineering, The University of Hong Kong) ;
  • Bai, Z.Z. (Department of Civil Engineering, The University of Hong Kong)
  • 투고 : 2006.07.21
  • 심사 : 2006.08.21
  • 발행 : 2006.05.25

초록

The flexural behaviour of symmetrically reinforced concrete (RC) columns cast of normal- and high-strength concrete under both monotonic and cyclic loading is studied based on an analytical procedure, which employs the actual stress-strain curves and takes into account the stress-path dependence of concrete and steel reinforcement. The analysis is particularly extended into the post-peak stage with large inelastic deformation at various applied axial load level. The effect of axial load on their complete flexural behaviour is then identified based on the results obtained. The axial load is found to have fairly large effect on the flexural behaviour of RC columns under both monotonic and cyclic loading. Such effects are discussed through examination of various aspects including the moment-curvature relationship, moment capacity, flexural ductility, variation of neutral axis depth and steel stress.

키워드

참고문헌

  1. ACI Committee 363 (1992), State-of-the-art report on high strength concrete, ACI 363-R92, American Concrete Institute, Detroit, U.S.A.
  2. Attard, M. M. and Setunge, S. (1996), 'The stress-strain relationship of confined and unconfined concrete', ACI Mater. J., 93(5), 432-442
  3. Attard, M. M. and Stewart, M. G. (1998), 'A two parameter stress block for high-strength concrete', ACI Struct. J., 95(3), 305-317
  4. Au, F. T. K., Bai, B. Z. Z., and Kwan, A. K. H. (2005), 'Complete moment-curvature relationship of reinforced normal- and high-strength concrete beams experiencing complex load history', Comput. Conc., An Int. J., 4(2), 309-324
  5. Au, F. T. K. and Kwan, A. K. H. (2004), 'A minimum ductility design method for non-rectangular high-strength concrete beams', Comput. Conc., An Int. J., 1(2), 115-130 https://doi.org/10.12989/cac.2004.1.2.115
  6. Azizinamini, A., Corley, W. G., and Johal, L. S. P. (1992), 'Effects of transverse reinforcement on seismic performance of columns', ACI Struct. J., 89(4), 442-450
  7. Azizinamini, A., Kuska, S. S. B., Brungardt, P., and Hatfield, E. (1994), 'Seismic behavior of square high-strength concrete columns', ACI Struct. J., 91(3), 336-345
  8. Bai, Z. Z., Au, F. T. K., and Kwan, A. K. H., 'Complete nonlinear response of reinforced concrete beams under cyclic loading', The Structural Design of Tall and Special Building (to appear)
  9. Carreira, D. J. and Chu, K. H. (1986), 'The moment-curvature relationship of reinforced concrete members'. ACI J., 83(2), 191-198
  10. Elmorsi, M., Kianoush, M. R., and Tso, W. K. (1998), 'Nonlinear analysis of cyclically loaded reinforced concrete structures', ACI Struct. J., 95(6), 725-739
  11. Gerald, C. F. and Wheatley, P. O. (1999), Applied Numerical Analysis, 6th Ed., Addison-Wesley, USA, 698pp
  12. Guo, Z. H. and Zhang, X. Q. (1987), 'Investigation of complete stress-deformation curves for concrete in tension', ACI Mater. J., 84(4), 278-285
  13. Ho, J. C. M. and Pam, H. J. (2003), 'Inelastic design of low-axially loaded high-strength reinforced concrete columns', Eng. Struct., 25(8), 1083-1096 https://doi.org/10.1016/S0141-0296(03)00050-6
  14. Hwang, S. K. and Yun, H. D. (2004), 'Effects of transverse reinforcement on flexural behavior of high-strength concrete columns', Eng. Struct., 26(1), 1-12 https://doi.org/10.1016/j.engstruct.2003.08.004
  15. Kwan, A. K. H. and Au, F. T. K. (2004), 'Flexural strength-ductility performance of flanged beam sections cast of high-strength concrete', The Structural Design of Tall Buildings, 13(1), 29-43 https://doi.org/10.1002/tal.231
  16. Kwan, A. K. H., Au, F. T. K., and Chau S. L. (2004), 'Effects of confinement on flexural strength and ductility design of HS concrete beams', The Structural Engineer, 8(23-24), 38-44
  17. Menegotto, M. and Pinto, P. E. (1973), 'Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending'. IABSE Symposium, Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Spain
  18. Pam, H. J., Kwan, A. K. H. and Ho, J. C. M. (2001), 'Post-peak behavior and flexural ductility of doubly reinforced normal- and high-strength concrete beams', Struct. Eng. Mech., 12(5), 459-474 https://doi.org/10.12989/sem.2001.12.5.459
  19. Sakai, K. and Sheikh, S. A. (1989), 'What do we know about confinement in reinforced concrete columns? (A critical review of previous work and code provisions)', ACI Struct. J., 86(2), 192-207
  20. Sheikh, S. A. and Yeh, C. C. (1990), 'Tied concrete columns under axial load and flexure', J. Struct. Eng., 116(10), 2780-2800 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:10(2780)
  21. Soroushian, P., Sim, J., and Hsu, J. W. (1991), 'Axial/flexural behavior of reinforced concrete sections. Effects of the design variable', ACI Struct. J., 88(1), 17-21

피인용 문헌

  1. Effect of small axial force on flexural ductility design of high-strength concrete beams vol.24, pp.11, 2015, https://doi.org/10.1002/tal.1209
  2. Flexural ductility design of high-strength concrete columns vol.22, pp.1, 2013, https://doi.org/10.1002/tal.662
  3. Effects of strain hardening of reinforcement on flexural strength and ductility of reinforced concrete columns vol.20, pp.7, 2011, https://doi.org/10.1002/tal.554
  4. Recent developments in optimal reinforcement of RC beam and column sections vol.33, pp.4, 2011, https://doi.org/10.1016/j.engstruct.2010.12.038
  5. Maximum axial load level and minimum confinement for limited ductility design of high-strength concrete columns vol.6, pp.5, 2006, https://doi.org/10.12989/cac.2009.6.5.357
  6. Numerical analysis of under-designed reinforced concrete beam-column joints under cyclic loading vol.7, pp.3, 2006, https://doi.org/10.12989/cac.2010.7.3.203
  7. Maximum concrete stress developed in unconfined flexural RC members vol.8, pp.2, 2006, https://doi.org/10.12989/cac.2011.8.2.207
  8. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2006, https://doi.org/10.12989/cac.2011.8.4.445
  9. Effect of confinement on flexural ductility design of concrete beams vol.20, pp.2, 2006, https://doi.org/10.12989/cac.2017.20.2.129
  10. Comparison of displacement capacity of reinforced concrete columns with seismic codes vol.8, pp.4, 2006, https://doi.org/10.12989/acc.2019.8.4.295
  11. Improving the seismic performance of reinforced concrete frames using an innovative metallic-shear damper vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.275