DOI QR코드

DOI QR Code

An effective stiffness model for RC flexural members

  • 투고 : 2006.06.06
  • 심사 : 2006.06.29
  • 발행 : 2006.11.30

초록

The paper presents an effective stiffness model for deformational analysis of reinforced concrete cracked members in bending throughout the short-term loading up to the near failure. The method generally involves the analytical derivation of an effective moment of inertia based on the smeared crack technique. The method, in a simplified way, enables us to take into account the non linear properties of concrete, the effects of cracking and tension stiffening. A statistical analysis has shown that proposed technique is of adequate accuracy of calculated and experimental deflections data provided for beams with small, average and normal reinforcement ratios.

키워드

참고문헌

  1. ACI (1999), ACI Committee 318: Building Code Requirements for Reiriforced Concrete and Commentary, ACI 318-99/ACI 318R-99, American Concrete Institute, Michigan
  2. AI-Zaid, R.Z., AI-Shaikh, AH. and Abu-Hussein, M.M. (1991), 'Effect of loading type on the effective moment of inertia of reinforced concrete beams', ACI J, 88(2), 184-190
  3. Artemiev, V.P. (1959), 'Investigation of strenght, stiffness and crack resistance of RC and PRC beams reinforced with 30X12C steel class', Proc. of Institutions of Higher Education: Civil Engineering 4, Novosibirsk. (in Russian)
  4. Balevicius, R. and Simbirkin, V. (2005), 'Non-linear physical relations for reinforced concrete elements under long-tenn loading', Int. J Appl. Mech. Eng., 10(1), 5-20
  5. Bazant, Z.P. and Oh, B.-H. (1984), 'Defonnation of progressively cracking reinforced concrete beams', ACI J, 81(3), 268-278
  6. Branson, D.E. (1968), 'Design procedures for computing deflection', ACI J, 65(9), 730-742
  7. Chan, C-M., Ning, E and Mickleborough, N.C. (2000), 'Lateral stiffness characteristics of tall reinforced concrete buildings under service loads', The Structural Design ofTall Buildings, 9(5), 365-383 https://doi.org/10.1002/1099-1794(200012)9:5<365::AID-TAL158>3.0.CO;2-B
  8. de Borst, R (2002), 'Fracture in quasi-brittle materials: A review of continuum damage-based approaches', Engng. Fracture Mech., 69, 95-112 https://doi.org/10.1016/S0013-7944(01)00082-0
  9. Figarovskyi, v.v. (1962), 'Experimental investigation of stiffness and cracking of RC flexural members subjected to short- and long-term loadings', PHD Thesis, Moscow. (in Russian)
  10. Gilbert, R.I. (1983), 'Deflection calculations for reinforced concrete beams', Civil Engineering Transactions, CE25(2), 128-134
  11. Guscha, Yu.P. (1968), 'Investigation of flexural RC members under elasto-plastic behavior of reinforced bars', PHD Thesis, Moscow. (in Russian)
  12. Kaklauskas, G (1999), 'A new stress-strain relationship for cracked tensile concrete in flexure', J Civil Eng. Management (Statyba), 5(6), 349-356
  13. Kaklauskas, G and Ghaboussi, J. (2001), 'Stress-strain relations for cracked tensile concrete from RC beam tests', J Struct. Engrg., ASCE, 127(1), 64-73 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(64)
  14. Kaklauskas, G (2004), 'Flexural layered deformational model of reinforced concrete members', Magazine of Concrete Research, 56(10), 575-584 https://doi.org/10.1680/macr.56.10.575.53678
  15. Kwak, H.G and Kim, S-P. (2002), 'Nonlinear analysis of RC beams based on moment-curvature relation', Comput. Struct., 80, 615-628 https://doi.org/10.1016/S0045-7949(02)00030-5
  16. Lin, C.S. and Scordelis, AC. (1975), ''Nonlinear analysis of RC shell of general form', J Struct. Div., ASCE, 101(3), 523-538
  17. Mendis, P.A. and Darval, P.I. (1988), 'Stability analysis of softening frames', J Struct. Eng., ASCE, 114(5), 1057-1072 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:5(1057)
  18. Mulin, N.M., Artemiev, v.P., Belobrov, I.K., Guzeev, YeA., Krasovskaya, GM., Petrova, K.v. and Figarovskyi, v.v. (1970), 'Substantiation of deformational analysis by new code project', Proc. of Institution of Higher Educations: Civil Engineering 8, Novosibirsk. (in Russian)
  19. Nemirovskyi, Ya.M. and Kochetkov, O.I. (1969), 'The influence of tensile and compressive concrete on the deformational behavior of flexural RC members after cracking', Deformational Peculiarities of Plain and Reinforced Concretes and Computer Based Estimation of their Influence on the Behavior of Structures, AA. Gvozdev and S.M. Krylov Editors, NIIZHB, Moscow, 38-76. (in Russian)
  20. Ngo, D. and Scordelis, AC. (1967), 'Finite element analysis of reinforced concrete beams', ACI J, 64(3),152-163
  21. Ning, E, Mickleborough, N.C. and Chan, Ch-M. (2001), 'Service load response prediction of reinforced concrete flexural members', Struct. Eng. Mech., 12(1), 1-16 https://doi.org/10.12989/sem.2001.12.1.001
  22. Pietruszczak, S. and Mroz, Z. (1981), 'Finite element analysis of deformation of strain softening materials', Int. J Numer. Meth. Eng., 17, 327-334 https://doi.org/10.1002/nme.1620170303
  23. Prakhya, GK.v. and Morley, C.T. (1990), 'Tension stiffening and moment-curvature relations for reinforced concrete elements', ACI J, 87(5), 597-605
  24. prEN (2001), EuroCode 2: Design of Concrete Structures, prEN 1992-1, European Committee for Standardization, Brusselles
  25. Rashid, Y.R (1968), 'Analysis of prestressed concrete pressure vessels', Nucl. Engng. Design, 7(4), 334-344 https://doi.org/10.1016/0029-5493(68)90066-6
  26. Razaqpur, AG and Isgor, O.B. (2003), 'Rational method for calculating deflection of continuous FRP RIC beams', ACI J, 210 (special publications), 191-208
  27. Rozenbliumas, A (1966), 'Calculation of reinforced concrete structures in consideration of tensile stress of concrete', Investigation ofReinforced Concrete Structures I, Vilnius. 3-32. (in Russian)
  28. Schnobrick, W.C. (1985), 'Role of finite element analysis of reinforced concrete structures', Proc. of the Seminar on Finite Element Analysis of Reinforced Concrete Structures, Tokyo, May
  29. Scott, RH. and Beeby, AW. (2005), 'Long-term tension-stiffening effects in concrete', ACI J, 102(1), 31-39
  30. Simbirkin, V. and Balevicius, R. (2004), 'Long-term strength and deformational analysis of reinforced concrete columns', J Civil Eng. Management, 10(1), 67-75 https://doi.org/10.1080/13923730.2004.9636288
  31. Sluys, L.J. and de Borst, R. (1996), 'Failure in plain and reinforced concrete - an analysis of crack width and crack spacing', Int. J Solids Struct., 33(20-22), 3257-3276 https://doi.org/10.1016/0020-7683(95)00258-8
  32. SNiP (1989), Concrete and Reinforced Concrete Structures. Design Code SNiP 2.03.01-84, Gosstroy SSSR, Moscow. (in Russian)
  33. Suidan, M. and Schnobrich, WC. (1973), 'Finite element analysis of reinforced concrete', J Struct. Div.. ASCE, 99(10),2109-2122
  34. Yost, J.R., Gross, Sh.P. and Dinehart, D.W (2003), 'Effective moment of inertia for glass fiber-reinforced polymer-reinforced concrete beams', ACI J, 100(6), 732-739
  35. Zalesov, A.S., Kodysh, E.N., Lemysh, L.L. and Nikitin, IX. (1988), Strength and Deformational Analysis of RC Structures, Stroyizdat, Moscow. (in Russian)

피인용 문헌

  1. An average stress strain approach to creep analysis of RC uncracked elements vol.14, pp.1, 2010, https://doi.org/10.1007/s11043-009-9093-x
  2. An effective stiffness model for GFRP RC cracked flexural members vol.98, 2016, https://doi.org/10.1016/j.compositesb.2016.05.050
  3. Tension stiffening approach for deformation assessment of flexural reinforced concrete members under compressive axial load vol.20, pp.6, 2006, https://doi.org/10.1002/suco.201800286