Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Flexural ductility of HSC members

  • Maghsoudi, A.A. (Civil Engineering Department, Kerman University) ;
  • Bengar, H. Akbarzadeh (Civil Engineering Department, Kerman University)
  • Received : 2005.05.09
  • Accepted : 2006.05.08
  • Published : 2006.09.30
⟨ Previous Next ⟩

Abstract

In seismic areas, ductility is an important factor in design of high strength concrete (HSC) members under flexure. A number of twelve HSC beams with different percentage of ${\rho}$ & ${\rho}^{\prime}$ were cast and incrementally loaded under bending. The effect of ${\rho}^{\prime}$ on ductility of members were investigated both qualitatively and quantitatively. During the test, the strain on the concrete middle faces, on the tension and compression bars, and also the deflection at different points of the span length were measured up to failure. Based on the obtained results, the serviceability and ultimate behavior, and especially the ductility of the HSC members are more deeply reviewed. Also a comparison between theoretical and experimental results are reported here.

Keywords

References

  1. ACI Committee 318 (2005), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, ACI 318-02 and ACI 318R-02
  2. ACI Committee 363 (1992), Review of ACI Code for Possible Revisions for High-Strength Concrete (ACI 362R-92), American Concrete Institute, Detroit
  3. Ahmad, S.H. and Barker, R. (1991), 'Flexural behavior of reinforced high strength lightweight concrete beams', ACI Mater. J., 88(1), 69-77
  4. Ashour, A.A. (2000), 'Effect of compressive strength and tensile reinforcement ratio on flexural behavior of high-strength concrete beams', Eng. Struct., 22(5), 413-423 https://doi.org/10.1016/S0141-0296(98)00135-7
  5. Ashour, S.A. and Wafa, F.F. (1993), 'Flexural behavior of high strength fiber reinforced concrete beams', ACI Struct. J., 90(3), 279-287
  6. Ashour, A.A., Wafa, F.F. and Kamal, M.I. (2000), 'Effect of the concrete compressive strength and tensile reinforcement ratio on the flexural behavior of fibrous concrete beams', Eng. Struct. J., 22(9), 1133-1146 https://doi.org/10.1016/S0141-0296(99)00062-0
  7. CAN3-A23.3-94. (1994), Design of Concrete Structures for Building, Canadian Standards Association, Ontario, Canada
  8. Ghali, A. (1993), 'Deflection of reinforced concrete members, a critical review', ACI Struct. J., 90(4), 364-373
  9. Khuntia, M. and Ghosh, S.K. (2004), 'Flexural stiffuess of reinforced concrete columns and beams', ACI Struct. J., 101(3), 351-363
  10. Leslie, K.E., Rajagopalan, K.S. and Everard, N.J. (1976), 'Flexural behavior of high-strength concrete beams', ACI Struct. J., 73(9), 517-521
  11. Macgregor, I.G. (1988), Reinforced Concrete Mechanics and Design, New Jersey, Prentice-Hall International, U.S.A
  12. Maghsoudi, A.A. (1996), Design for Ductility of Structures, Shaheed Bahonar University Publications, Kerman, Iran
  13. Nilson, A.H. (1987), 'Design implication of current research on high strength concrete', High-Strength Concrete, ACI SP-87, American Concrete Institute, Detroit
  14. Ozbakkaloglu, T. and Saatcioglu, M. (2004), 'Rectangular stress block for high-strength concrete', ACI Struct. J., 101(4), 475-483
  15. Paster, J.A, Nilson, A.H. and Slate, F.O. (1984), 'Behavior of high-strength concrete beams', Report No. 84-3, Department of Structural Engineering, Cornell University, Ithaca, NY
  16. Shin, S.W., Ghosh, S.K. and Moreno, J. (1989), 'Flexural ductility of ultra-high strength concrete members', ACI Struct. J., 86(9), 394-400
  17. Swamy, R.N. (1987), 'High strength concrete-material properties and structural behavior', High-Strength Concrete, ACI SP-87. American Concrete Institute, Detroit
  18. Tsong, Y., Yen, L.H. and Jaw, W.T. (1989), 'Amelioration of stirrup and compression reinforcement on the ductility of reinforced high-strength concrete beam', Proc. of the Structures Congress, San Francisco, CA, May 1-5

Cited by

  1. Prediction of curvature ductility factor for FRP strengthened RHSC beams using ANFIS and regression models vol.16, pp.3, 2015, https://doi.org/10.12989/cac.2015.16.3.399
  2. Predicting the Ductility of RC Beams Using Nonlinear Regression and ANN vol.40, pp.4, 2016, https://doi.org/10.1007/s40996-016-0033-0
  3. Curvature ductility of high strength concrete beams according to Eurocode 2 vol.58, pp.1, 2016, https://doi.org/10.12989/sem.2016.58.1.001
  4. Experimental and analytical investigation of reinforced high strength concrete continuous beams strengthened with fiber reinforced polymer vol.31, pp.3, 2010, https://doi.org/10.1016/j.matdes.2009.09.041
  5. Self compacting reinforced concrete beams strengthened with natural fiber under cyclic loading vol.17, pp.5, 2016, https://doi.org/10.12989/cac.2016.17.5.597
  6. Moment redistribution and ductility of CFRP strengthened and non-strengthened unbonded post-tensioned indeterminate I-beams composed of UHSSCC vol.174, 2017, https://doi.org/10.1016/j.compstruct.2017.04.057
  7. Experimental investigations and verification of debonding strain of RHSC continuous beams strengthened in flexure with externally bonded FRPs vol.43, pp.6, 2010, https://doi.org/10.1617/s11527-009-9550-7
  8. Flexural ductility of reinforced HSC beams strengthened with CFRP sheets vol.30, pp.4, 2006, https://doi.org/10.12989/sem.2008.30.4.403
  9. Maximum axial load level and minimum confinement for limited ductility design of high-strength concrete columns vol.6, pp.5, 2006, https://doi.org/10.12989/cac.2009.6.5.357
  10. Maximum concrete stress developed in unconfined flexural RC members vol.8, pp.2, 2006, https://doi.org/10.12989/cac.2011.8.2.207
  11. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2006, https://doi.org/10.12989/cac.2011.8.4.445
  12. Inelastic design of high-axially loaded concrete columns in moderate seismicity regions vol.39, pp.4, 2006, https://doi.org/10.12989/sem.2011.39.4.559
  13. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2006, https://doi.org/10.12989/sem.2011.40.4.541
  14. Curvature ductility prediction of high strength concrete beams vol.66, pp.2, 2006, https://doi.org/10.12989/sem.2018.66.2.195
  15. Ultimate stress increase in unbonded tendons in post-tensioned indeterminate I-beams cast with high strength normal and self compacting concrete vol.21, pp.3, 2006, https://doi.org/10.1016/j.jestch.2018.04.006
  16. A new anchorage system for CFRP strips in externally strengthened RC continuous beams vol.30, pp.None, 2006, https://doi.org/10.1016/j.jobe.2020.101230