DOI QR코드

DOI QR Code

A fractal fracture model and application to concrete with different aggregate sizes and loading rates

  • Chang, Kug Kwan (Architectural Engineering Department, Seoul National University of Technology) ;
  • Xi, Yunping (Department of Civil, Environmental and Architectural Engineering, University of Colorado) ;
  • Roh, Y.S. (Architectural Engineering Department, Seoul National University of Technology)
  • Received : 2005.07.29
  • Accepted : 2006.02.03
  • Published : 2006.05.30

Abstract

Recent developments in fractal theory suggest that fractal may provide a more realistic representation of characteristics of cementitious materials. In this paper, the roughness of fracture surfaces in cementitious material has been characterized by fractal theory. A systematic experimental investigation was carried out to examine the dependency of fracture parameters on the aggregate sizes as well as the loading rates. Three maximum aggregate sizes (4.76 mm, 12.7 mm, and 19.1 mm) and two loading rates (slow and fast loading rate) were used. A total of 25 compression tests and 25 tension tests were performed. All fracture parameters exhibited an increase, to varying degrees, when aggregates were added to the mortar matrix. The fracture surfaces of the specimens were digitized and analyzed. Results of the fractal analysis suggested that concrete fracture surfaces exhibit fractal characteristics, and the fractal geometry provide a useful tool for characterizing nonlinear fracture behavior of concrete. Fractal dimension D was monotonically increased as maximum aggregate sizes increase. A new fractal fracture model was developed which considers the size and shape of aggregate, and the crack paths in the constituent phases. Detailed analyses were given for four different types of fracture paths. The fractal fracture model can estimate fractal dimension for multiphase composites.

Keywords

References

  1. Bentur, A. and Mindess, S. (1986), ' The effect of concrete strength on crack patterns ', Cement and Concrete Research, 16(1), 59-66 https://doi.org/10.1016/0008-8846(86)90068-2
  2. Carpinteri, A., Chiaia, R and Cornetti, P. (2004), ' A mesoscopic theory of damage and fracture in heterogeneous materials ', Theoretical and Applied Fracture Mechanics, 41, 30-50
  3. Chiaia, R, van Mier, J.G.M. and Vervuit, A. (1998),' Crack growth mechanism in four different concretes: Microscopic observation and fractal analysis ', Cement and Concrete Research, 28, 103-114 https://doi.org/10.1016/S0008-8846(97)00221-4
  4. Dougan, L.T. and Addison, P.S. (2001), ' Estimating the cut-off in the fractal scaling of fractured concrete ', Cement and Oncrete Research, 31, 1043-1048 https://doi.org/10.1016/S0008-8846(01)00518-X
  5. Issa, Mohesen A., Issa, Mahmoud A., Islam, M.S. and Chudnovsky, A. (2003), ' Fractal dimension - A measure of fracture roughness and toughness of concrete ', Eng. Fracture Mech., 70, 125-137 https://doi.org/10.1016/S0013-7944(02)00019-X
  6. Lange, D.A., Jennings, H.M. and Shah, S.P. (1993), ' Relationship between fracture surface roughness and fracture behavior of cement paste and mortar ', J .American Ceramic Society, 76(3), 589-597 https://doi.org/10.1111/j.1151-2916.1993.tb03646.x
  7. Li, X.W., Tian, J., Kang, Y. and Wang, Z.G (1995),' Quantitative analysis of fracture surface by roughness and fractal method ', Scripta Metallurgica et Materialia, 33(5), 803-809 https://doi.org/10.1016/0956-716X(95)00280-9
  8. Lung, C.W. and Mu, Z.Q. (1987), ' Fractal dimension measured with perimeter-area relation and toughness of materials ', Physics Review Bulletin, 38(16),11781-11784
  9. Perdikaris, P.C. and Romeo, A. (1995), ' Size effect on the fracture energy of concrete and stability issues in three point bending fracture toughness testing ', ACI Mater. J., 92(5),483-496
  10. Richardson, L.F. (1961), ' The problem of contiguity: An appendix of statistics of deadly quarrels ', General System Yearbook, 6, 139-187
  11. Roh, Y.S. and Xi, Y. (2001), ' The fracture surface roughness of concrete with different aggregate sizes and loading rates ', ACI Special Publication, SP 201 - Fracture Mechanics for Concrete Materials: Testing and Applications, 35-54
  12. Saouma, V.E. and Barton, C.C. (1994), ' Fractals, fractures and size effects in concrete ', J. Eng. Mech., ASCE, 120(4), 835-854 https://doi.org/10.1061/(ASCE)0733-9399(1994)120:4(835)
  13. Trefilov, V.I., Kartuzov, V.V. and Minakov, N.V. (2001),' Fractal dimension of fracture surfaces ', Metal Science and Heat Treatment, 43(3-4), 95-98 https://doi.org/10.1023/A:1010537031635
  14. Wang, Y. and Diamond, S. (2001), ' A fractal study of the fracture surface of cement pastes and mortars using a stereoscopic SEM method ', Cement and Concrete Research, 31, 1385-1392 https://doi.org/10.1016/S0008-8846(01)00591-9
  15. Xie, H. (1993), Fractals in Rock Mechanics, A.A. Balkema, Brookfield, Vt
  16. Zhang Z., Yu, J., Kou, S.Q. and Lindqvist, P-A. (2001),' On study of influences of loading rate on fractal dimensions of fracture surfaces in Gabbro ', Rock Mechanics and Rock Engineering, 34(3), 235-242 https://doi.org/10.1007/s006030170011

Cited by

  1. Fractal behavior identification for monitoring data of dam safety vol.57, pp.3, 2016, https://doi.org/10.12989/sem.2016.57.3.529
  2. A Fractal Model of Cracking of Cement Matrix Composites vol.10, pp.3, 2006, https://doi.org/10.3390/buildings10030052