DOI QR코드

DOI QR Code

Stability of a slender beam-column with locally varying Young's modulus

  • Kutis, Vladimir (Department of Mechanics, Slovak University of Technology, Faculty of Electrical Engineering and Information Technology) ;
  • Murin, Justin (Department of Mechanics, Slovak University of Technology, Faculty of Electrical Engineering and Information Technology)
  • 투고 : 2005.01.31
  • 심사 : 2006.01.18
  • 발행 : 2006.05.10

초록

A locally varying temperature field or a mixture of two or more different materials can cause local variation of elasticity properties of a beam. In this paper, a new Euler-Bernoulli beam element with varying Young's modulus along its longitudinal axis is presented. The influence of axial forces according to the linearized 2nd order beam theory is considered, as well. The stiffness matrix of this element contains the transfer constants which depend on Young's modulus variation and on axial forces. Occurrence of the polynomial variation of Young's modulus has been assumed. Such approach can be also used for smooth local variation of Young's modulus. The critical loads of the straight slender columns were studied using the new beam element. The influence of position of the local Young's modulus variation and its type (such as linear, quadratic, etc.) on the critical load value and rate of convergence was investigated. The obtained results based on the new beam element were compared with ANSYS solutions, where the number of elements gradually increased. Our results show significant influence of the locally varying Young's modulus on the critical load value and the convergence rate.

키워드

참고문헌

  1. ANSYS 6.1 (2002), A purpose FEM-program. SAS IP.
  2. Banerjee, J.R. and Williams, F.W. (1986), ' Exact Bernoulli-Euler static stiffuess matrix for a range of tapered beam-column ', Int. J. Num. Meth. Eng., 23, 1615-1628 https://doi.org/10.1002/nme.1620230904
  3. Chakraborty, A., Gopalakrishnan, S. and Reddy, J.N. (2003), ' A new beam finite element for the analysis of functionally graded materials ', Int. J. Mech. Sci., 45, 519-539 https://doi.org/10.1016/S0020-7403(03)00058-4
  4. Chugh, A.K. and Biggers, S.B. (1976), ' Stiffness matrix for a non-prismatic beam-column element ' , Int. J .Num.Meth. Eng., 10, 1125-1142 https://doi.org/10.1002/nme.1620100512
  5. Kutis, V. and Murin, J. (2002), RAM3D - Program for Statical Analysis of Frame Structures. FEI STU Bratislava
  6. Lee, B.K. and Oh, S.J. (2000), ' Elastica and buckling load of simple tapered columns with constant volume ', Int. J. Solid Struct., 37, 2507-2518 https://doi.org/10.1016/S0020-7683(99)00007-4
  7. Li, Q.S. (2001), ' Buckling of multi-step non-uniform beams with elastically restrained boundary conditions ' , J.Const. Steel Res., 57, 753-777 https://doi.org/10.1016/S0143-974X(01)00010-4
  8. Librescu, L., Oh, S.Y. and Song, O. (2004), ' Spinning thin-walled beams made of functionally graded materials:Modelling, vibration and instability', European J. Mech. A - Solids, 23,499-515 https://doi.org/10.1016/j.euromechsol.2003.12.003
  9. Mehlhorn, G (1995), Der Ingenieurbau: Grundwissen, Ernst & Sohn, Berlin
  10. Murin, J. and Kutis, V. (2002), ' Beam element with continuous variation of the cross-sectional area' , Comput. Struct., 80, 329-338 https://doi.org/10.1016/S0045-7949(01)00173-0
  11. Murin, J. and Kutis, V. (2003), 'Beam element with varying stiffness', J. Mech. Eng., 54, 239-252
  12. Murin, J. and Kutis, V. (2004), ' Stability of bar with locally varying elasticity modulus ', Proc. of the Sixth World Congress on Computational Mechanics, Beijing, China
  13. Rubin, H. (1996), ' Analytische Losung linearer Differentialgleichungen mit veranderlichen Koeftizienten und ein baustatisches Problem', ZAMM, 76, 101-113
  14. Rubin, H. and Schneider, K.J. (1996), Baustatik - Theorie l. und II. Ordnung, Werner-Verlag, Dusseldorf
  15. Sankar, B.V. (2001), ' An elasticity solution for functionally graded beams ', Comp. Sci. Tech., 61, 689-696 https://doi.org/10.1016/S0266-3538(01)00007-0
  16. Sapountzakis, E.J. and Mokos, V.G (2004),' 3-D beam element of variable composite cross section including warping effect ', Acta Mechanica, 171, 151-169 https://doi.org/10.1007/s00707-004-0148-4
  17. Su, H. and Banerjee, J.R. (2004), ' Free vibration behaviour of a range of high aspect ratio aircraft wings using the dynamic stiffuess method ', Proc. of the Sixth World Congress on Computational Mechanics, Beijing, China.

피인용 문헌

  1. Buckling of functionally graded and elastically restrained non-uniform columns vol.40, pp.5, 2009, https://doi.org/10.1016/j.compositesb.2009.03.001
  2. An effective solution of electro-thermo-structural problem of uni-axially graded material vol.28, pp.6, 2006, https://doi.org/10.12989/sem.2008.28.6.695
  3. An approximate spectral element model for the dynamic analysis of an FGM bar in axial vibration vol.61, pp.4, 2006, https://doi.org/10.12989/sem.2017.61.4.551