DOI QR코드

DOI QR Code

Seismic behavior of structures isolated with a hybrid system of rubber bearings

  • Chen, Bo-Jen (R & D Department, Earthquake Proof Systems, Inc.) ;
  • Tsai, C.S. (Department of Civil Engineering, Feng Chia University) ;
  • Chung, L.L. (National Center for Research on Earthquake Engineering) ;
  • Chiang, Tsu-Cheng (Graduate Institute of Civil and Hydraulic Engineering, Feng Chia University)
  • 투고 : 2005.06.17
  • 심사 : 2005.12.21
  • 발행 : 2006.04.20

초록

The enlargement of interest in base isolators as an earthquake-proof design strategy has dramatically accelerated experimental studies of elastomeric bearings worldwide. In this paper, a new base isolator concept that is a hybrid system of rubber bearings is proposed. Uniaxial, biaxial, and triaxial shaking table tests are also performed to study the seismic behavior of a 0.4-scale three-story isolated steel structure in the National Center for Research on Earthquake Engineering in Taiwan. Experimental results demonstrate that structures with a hybrid system of rubber bearings composed of stirruped rubber bearings and laminated rubber bearings can actually decrease the seismic responses of the superstructure. It has been proved through the shaking table tests that the proposed hybrid system of rubber bearings is a very promising tool to enhance the seismic resistance of structures. Moreover, it is demonstrated that the proposed analytical model in this paper can predict the mechanical behavior of the hybrid system of rubber bearings and seismic responses of the base-isolated structures.

키워드

과제정보

연구 과제 주관 기관 : National Science Council

참고문헌

  1. Chen, B.J., Lin, S.B. and Tsai, C.S. (2001), 'Theoretical and experimental study of high damping rubber bearings', Seismic Engineering 2001, The 2001 ASME PVP Conf., Vol. 2, Edited by G Roussel, Atlanta, Georgia, U.S.A., 155-162
  2. Chen, B.J., Tsai, C.S. and Chiang, T.C. (2004), 'Compressive stiffness verification of stirrup rubber bearing', Seismic Engineering 2004, The 2004 ASME PVP Conf., Edited by V.C. Matzen and S. Fujita, San Diego, California, U.S.A., July 25-29, 1, 217-224
  3. Clark, Peter W., Aiken, Ian D. and Kelly, James M. (1997), 'Experimental studies of the ultimate behavior of seismically-isolated structures', Technical Report EERC-97-l8, Earthquake Engineering Research Center, University of California' Berkeley, California, U.S.A.
  4. Fujita, T., Suzuki, S. and Fujita, S. (1990), 'High damping rubber bearings for seismic isolation of buildings', Trans. Japan Soc. Mech. Eng., C56, 658-666
  5. Iizuka, M. (1993), Recommendation for the Design of Base Isolated Buildings, Architectural Institute of Japan
  6. Kasalanati, Amarnath and Constantinou, Michael C. (1999), 'Experimental study of bridge elastomeric and other isolation and energy dissipation systems with emphasis on uplift prevention and high velocity near-source seismic excitation', Technical Report MCEER-99-0004, University at Buffalo, State University of New York, U.S.A.
  7. Kelly, J.M. (1997), Earthquake-Resistant Design with Rubber, Second Edition, London
  8. Koh, C.G. and Kelly, J.M. (1988), 'A simple mechanical model for elastomeric bearings used in base isolation', Int. J. Mech. Sci., 30(12), 933-943 https://doi.org/10.1016/0020-7403(88)90075-6
  9. Komodromos, Petros (2000), Seismic Isolation for Earthquake-Resistant Structures, WIT Press, Ashurst Lodge, Ashurst, Southampton, SO40 7AA, UK
  10. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures-From Theory to Practice, John Wiley & Sons, Inc.
  11. Skinner, R.I., Robinson, W.H. and McVerry, G.H. (1993), An Introduction to Seismic Isolation, John Wiley & Sons, Inc.
  12. Stanton, J.F., Scroggings, G., Taylor, A.W. and Roeder, C.W. (1990), 'Stability of laminated elastomeric bearings', J. Eng. Mech., 116(6), 1351-1371 https://doi.org/10.1061/(ASCE)0733-9399(1990)116:6(1351)
  13. Tsai, C.S. (1996), 'Nonlinear stress analysis techniques.-NSAT', Department of Civil Engineering, Feng Chia University, Taichung, Taiwan, R.O.C.
  14. Tsai, C.S., Chen, B.J. and Chiang, T.C. (2002), 'Shaking table tests of full scale base-isolated structures', Seismic Engineering 2002. The 2002 ASME PVP Conf., Vol. 2, Edited by S.C. Lu, Vancouver, British Columbia, Canada, 245-252
  15. Tsai, C.S., Chen, B.J., Chiang, T.C., and Lee, G.H. (2003a), 'Experimental study of a multiple bay structure isolated with hybrid bearings', Seismic Engineering 2003, The 2003 ASME PVP Conf., Edited by J.C. Chen, Cleveland, Ohio, U.S.A., 89-96
  16. Tsai, C.S., Chiang, T.C., Chen, B.J. and Lin, S.B. (2003b), 'An advanced analytical model for high damping rubber bearings', Earthq. Eng. Struct. Dyn., 32, 1373-1387 https://doi.org/10.1002/eqe.278
  17. Tsopelas, P.C., Nagarajaiah, S. and Constantinou, M.C. (1991), '3D-BASIS-M: Nonlinear dynamic analysis of multiple building base isolated structures', Technical Report NCREE-91-0014, State University of New York at Buffalo
  18. Tsopelas, P.C., Constantinou, M.C. and Reinhorn, A.M. (1994), '3D-BASIS-ME: Computer program for nonlinear dynamic analysis of seismically isolated single and multiple structures and liquid storage tanks', Technical Report NCREE-94-0010, State University of New York at Buffalo
  19. Wen, Y.K. (1976), 'Method for random vibration of hysteretic systems', J. Eng. Mech. Div., 102(2), 249-263

피인용 문헌

  1. Assessing the effect of inherent nonlinearities in the analysis and design of a low-rise base isolated steel building vol.5, pp.5, 2013, https://doi.org/10.12989/eas.2013.5.5.499
  2. Comparison of adaptive structural damage identification techniques in nonlinear hysteretic vibration isolation systems vol.12, pp.4, 2013, https://doi.org/10.1007/s11803-013-0204-y
  3. Seismic performance assessment of reinforced concrete bridge piers supported by laminated rubber bearings vol.29, pp.3, 2008, https://doi.org/10.12989/sem.2008.29.3.259
  4. Probabilistic analysis for the response of nonlinear base isolation system under the ground excitation induced by high dam flood discharge vol.16, pp.4, 2017, https://doi.org/10.1007/s11803-017-0419-4
  5. Parameter identification of hysteretic model of rubber-bearing based on sequential nonlinear least-square estimation vol.9, pp.3, 2010, https://doi.org/10.1007/s11803-010-0022-4