ROLLOVER INDEX-BASED ROLLOVER MITIGATION CONTROL SYSTEM

  • Yoon, J. (School of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Yi, K. (School of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Kim, D. (Mando Corporation)
  • 발행 : 2006.12.01

초록

This paper describes a rollover index (RI)-based rollover mitigation control (RMC) system. A rollover index which indicates an impending rollover has been developed by a roll dynamics phase plane analysis. The rollover index is calculated using the roll angle, the roll rate, the lateral acceleration and time to wheel lift (TTWL). A differential braking control law based on a 2-D bicycle model has been designed using the direct yaw control (DYC) method. An RMC threshold has been determined from the rollover index. The performance of the RMC scheme and the effectiveness of the proposed rollover index are illustrated using a vehicle simulator.

키워드

참고문헌

  1. Chen, B.-C. and Peng, H. (1999). Rollover warning of articulated vehicles based on a time-to-rollover metric. Proc. ASME Int. Congress and Exposition
  2. Chen, Bo-C. and Peng, H. (2001). Differential-brakingbased rollover prevention for sport utility vehicles with human-in-the-loop evaluations. Vehicle System Dynamics 36, 4-5, 359-389 https://doi.org/10.1076/vesd.36.4.359.3546
  3. Gillespie, T. D. (1992). Fundamentals of Vehicle Dynamics. Society of Automotive Engineers, Inc.. 310-317
  4. Hac, A., Brown, T. and Martens, J. (2004). Detection of vehicle rollover. SAE Paper No. 2004-01-1757
  5. Hac, A. (2002). Rollover stability index including effects of suspension design. SAE Paper No. 2002-01-0965
  6. Jang, B. C. and Marimuthu, R. P. (2006). Sensitivity analysis of SUV Parameters on rollover propensity. Int. J. Automotive Technology 7, 6, 703-714
  7. Kim, M. H., Oh, J. H., Lee, J. H. and Jeon, M. C. (2006). Development of rollover criteria based on simple physical model of rollover event. Int. J. Automotive Technology 7, 1, 51-59
  8. Schubert, P. J., Nichols, D., Wallner, E. J., Kong, H., Schiffmann, J. K. (2004). Electronics and algorithms for rollover sensing. SAE Paper No. 2004-01-0343
  9. Uematsu, K. and Gerdes, J. C. (2002). A comparison of several sliding surface for stability control. Proc. Int. Symp. Advanced Vehicle Control, AVEC'2002
  10. Ungoren, A. Y. and Peng, H. (2001). Rollover propensity evaluation of an SUV equipped with a TRW VSC system. SAE Paper No. 2001-01-0128
  11. Yang, H. and Liu, L. Y. (2003). A robust active suspension controller with rollover prevention. SAE Paper No. 2003-01-0959
  12. Yi, K., Chung, T., Kim, J. and Yi, S. (2003). An investigation into differential braking strategies for vehicle stability control. IMechE 217, Part D, 1081-1093