Two-Phase Flow through a T-Junction

  • Tae Sang-Jin (System Appliances Division, Samsung Electronics, Co., Ltd.) ;
  • Cho Keum-Nam (School of Mechanical Engineering, Sungkyunkwan University)
  • Published : 2006.03.01

Abstract

Two-phase flow through a T-junction has been studied by numerous researchers so far. The dividing characteristics of the gas and liquid phases at the T-junction are very complicated due to a lot of related variables. The prediction models have been suggested by using experimental data for a specific condition or working fluid. But, they showed the application limitation for the most of the other conditions or fluids. Since most of them are applicable for their own experimental range, the generalized model for the wide range of conditions and fluids is needed. Even though it's not available now, some of the models developed for air-water flow at a T-junction might be applicable for the part of refrigerants with some modifications. Especially, for the two-phase flow of refrigerants at the T-junction, very few studies have been performed. Further experimental study is required to be performed for the wide range of test conditions and fluids to predict properly the two-phase flow distribution and phase separation through the T-junction.

Keywords

References

  1. Azzopardi, B. J and Whalley, P. B., 1982, The effect of flow patterns on two-phase flow in a T-junction, Int. J Multiphase Flow, Vol. 8, pp. 491-507 https://doi.org/10.1016/0301-9322(82)90020-9
  2. Azzopardi, B. J, 1984, The effect of the side arm diameter on the two-phase flow split at a T junction, Int. J Multiphase Flow, Vol. 10, No.4, pp. 509-512 https://doi.org/10.1016/0301-9322(84)90059-4
  3. Azzopardi, B.J., Wagstaff, D., Patrick, L., Memory, S. B. and Dowling, J, 1988, The split of two-phase flow at a horizontal T-annular and stratified flow, Harwell, UK. AERE R 13059
  4. Saba, N. and Lahey, Jr., R. T., 1984, The analysis of phase separation phenomena in branching conduits, Int. J. Multiphase Flow, Vol.10, No.1, pp.1-20 https://doi.org/10.1016/0301-9322(83)90057-5
  5. Seeger, W., Reimann, J. and Muller, U., 1986, Two-phase flow in a T-junction with a horizontal inlet, Part I: Phase separation, Int. J. Multiphase Flow, Vol. 12, No.4, pp. 575-585 https://doi.org/10.1016/0301-9322(86)90061-3
  6. Collier, J. G., 1976, Single-phase and twophase flow behaviour in primary circuit components, In Proceedings of NATO Advanced Institute on Two-phase Flow and Heat Transfer, Vol. 1, pp.313-365
  7. Henry, J. A R., 1981, Dividing annular flow in a horizontal Tee, Int. J. Multiphase Flow, Vol. 7, pp.342-355
  8. Shoharn, 0., Brill, J. P. and Taitel, Y., 1987, Two-phase flow splitting in a Tee junction experiment and modeling, Chern. Eng. Science, Vol. 42, No.11, pp.2667-2676 https://doi.org/10.1016/0009-2509(87)87017-3
  9. Ballyk, J. D., Shoukri, M. and Chan, AM., 1988, Steam-water annular flow in a horizontal dividing T-junction, Int. J. Multiphase Flow, Vol. 14, No.3, pp.265-285 https://doi.org/10.1016/0301-9322(88)90044-4
  10. Rubel, M. T., Soliman, H. M. and Sims, G. E., 1988, Phase distribution during steamwater flow in a horizontal T-junction, Int. J. Multiphase Flow, Vol. 14, No.4, pp.425-438 https://doi.org/10.1016/0301-9322(88)90020-1
  11. Rubel, M. T., Timmerman, B. D., Soliman, H. M., Sims, G. E. and Ebadian, M. A, 1994, Phase distribution of high-pressure steamwater flow at large-diameter Tee junctions, Transactions of the ASME, Vol.116, pp. 592-598
  12. Azzopardi, B.J. and Memory, S. B., 1989, The split of two-phase flow at a horizontal Tannular and stratified flow, 4th Int. Conf. on Multi-phase Flow, Nice, France, pp.19-21
  13. Azzopardi, B.J. and Rea, S., 1999, Modeling the split of horizontal annular flow at a T-junction, Trans. I. Chern. E., Vol. 77 A, pp. 713-720 https://doi.org/10.1205/026387699526854
  14. Hart, J., Hamersma, P. J, and Fortuin, J, M. H., 1991, Phase distribution during gas-liquid flow through horizontal dividing junctions, Nuclear Engineering and Design, Vol. 126, pp.293-312 https://doi.org/10.1016/0029-5493(91)90022-A
  15. Hwang, S. T., Soliman, H. M. and Lahey, Jr., R. T., 1988, Phase separation in dividing twophase flows, Int. J, Multiphase Flow, Vol. 14, No.4, pp.439-458 https://doi.org/10.1016/0301-9322(88)90021-3
  16. Azzopardi, B.J., 2000, Phase separation at Tv-junction, Multiphase Science and Technology, Vol.11, pp.223-329
  17. Watanabe, M., Katsuta, M. and Nagata, K, 1995, General characteristic of two-phase flow distribution in a multipass tube, Heat Transfer-Japanese Research, Vol. 24, No.1, pp.3244
  18. Kim, J, S., 1993, Two phase flow distribution in multi-parallel evaporator' tubes, Korean Journal of Refrigeration-Air Conditioning Engineering, Vol. 12, No.1, pp. 1-20
  19. Tae, S. J, and Cho, K, 2002, Two-phase flow characteristics of refrigerant in T- branch with horizontal and vertical inlet tube, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol.14,No. 9, pp. 741-748
  20. Tae, S. J,and Cho, K, 2003, Two-phase flow distribution and phase separation through both horizontal and vertical branches, KSME Int. J., Vol. 17, No.8, pp. 1238-1245
  21. Tae, S.J., 2005, Dividing two-phase flow characteristics of refrigerants in a T-junction, Ph. D. Thesis, Sungkyunkwan University, Suwon, Korea
  22. Tae, S. J, and Cha, K, 2006, Effect of parameters on the two-phase flow distribution characteristics of refrigerants in a horizorital T-junction, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 18, No. I,PP. 31-37
  23. Roberts, P. A, Azzopardi, B.J. and Hibberd, S., 1997, The split of horizontal annular flow at a T-junction, Chemical Engineering Science, Vol. 52, No. 20, pp.3441-3453 https://doi.org/10.1016/S0009-2509(97)00174-7
  24. Reimann, J. and Seeger, W., 1986, Twophase flow in a T-junction with a horizontal inlet, Part II: Pressure differences, lnt. J. Multiphase Flow, Vol. 12, No.4, pp. 587-608 https://doi.org/10.1016/0301-9322(86)90062-5
  25. Ballyk, J D. and Shoukri, M., 1990, On the development of a model for predicting phase separation phenomena in dividing two-phase flow, Nuclear Engineering and Design, Vol. 123, pp.67-75 https://doi.org/10.1016/0029-5493(90)90271-X
  26. Peng, F., Shoukri, M. and Chan, A M. C, 1996, Effect of branch orientation on annular two-phase flow in T- junctions, Transactions of the ASME, Vol.118 , pp.166-171 https://doi.org/10.1115/1.2803639
  27. Graham, D. M., Kopke, H. R., Wilson, M. J, Yashar, D. A, Chato, J. C. and Newell, T. A, 1998, An investigation of void fraction in the annular/stratified flow regions in smooth, horizontal tubes, ACRC TR-144, Air Conditioning and Refrigeration Center, University of Illinois, Urbana
  28. Klausner, J. F., Chao, B. T. and Sao, S. L., 1990, An improved method for simultaneous determination of frictional pressure drop and vapor volume fraction in vertical flow boiling, Exper, Thermal Fluid Sci., Vol. 3, pp. 404-415 https://doi.org/10.1016/0894-1777(90)90039-A
  29. Gardel, A., 1957, Pressure drops in flows through T -shaped pipe-fittings, Bulletin Technique de la Suisse Romande, Vol. 9, pp. 122-130
  30. Chisholm, D. and Sutherland, L. A., 1969, Prediction of pressure gradients in pipeline systems during two-phase flow, Symposium on Fluid Mechanics and Measurements in Two-phase Flow Systems, Leeds, Paper 4