References
- Abate, K., 2000, 'Photochemical Etching of Metals,' Metal Finishing, Vol. 98, No. 6, pp. 414-417 https://doi.org/10.1016/S0026-0576(00)80439-0
- Sundaram, K. B., Sah, R. E., Baumann, H., Balachandran, K. and Todi, R. M., 2003, 'Wet Etching Studies of Silicon Nitride Thin Films Deposited by Electron Cyclotron Resonance Plasma Enhanced Chemical Vapor Deposition,' Microelectronic engineering, Vol. 70, pp. 109-114 https://doi.org/10.1016/S0167-9317(03)00412-X
- Allen, D. M., 1986, 'The Principles and Practice of Photochemical Machining and Photoetching,' Adam Hilger, Bristol and Boston
- Shrimpton, J. S. and Yule, A. J., 1998, 'Drop Size and Velocity Measurement in an Electrostatic Producted Hydrocarbon Spray,' ASME Journal of Fluids Engineering, Vol. 120, pp. 580-585 https://doi.org/10.1115/1.2820703
- Jung, J. W., Cha, K. J. and Kim, D. J., 2000, 'Characteristics of the Droplet Behavior in the Overlap Region of Twin Spray and in Single Spray,' Transactions of the KSME, B, Vol. 24, No. 10, pp. 1300-1308
- Visser, A. and Buhlert, M., 2001, 'Theoretical and Practical Aspects of the Miniaturization of Lead Frames by Double Sided Asymmetrical Spray Etching,' Journal of Materials Processing Technology, Vol. 115, pp. 108-113 https://doi.org/10.1016/S0924-0136(01)00751-8
- Ueda, R., Toki, S., Tanizaki, Y., Sugiutra, T. and Asakura, S., 1994, 'Principles of Photoetching in the Fabrication of Fine-Pitch Lead Frames,' Metal finishing, Vol. 92, No. 1, pp. 29-31
- Choi, Y. C., Jung, J. W. and Kim, D. J., 2001, 'Characteristics of Spray from Pressure-Swirl Nozzle with Different Liquid Properties and Nozzle Geometries,' Transactions of the KSME, B, Vol. 25, No. 12, pp. 1813-1820
- Ball, D., 1996 'Fine Line Etching of Lead Frames,' The journal PCMI, Vol. 63. pp. 29-31
- Jung, J. W. arid Kim, D. J., 2004, 'A Study on Effect of Spray Characteristics on Etching Characteristics in Micro Fabrication System,' Transactions of the KSME, B, Vol. 28, No. 1, pp. 109-117 https://doi.org/10.3795/KSME-B.2004.28.1.109
- Jung, J. W., Kim, Y. J. and Kim, D. J., 2004, 'Correlation Between Spray Characteristics and Etching Characteristics in Twin Spray,' Transactions of the KSME, B, Vol. 28, No. 4, pp. 449-455 https://doi.org/10.3795/KSME-B.2004.28.4.449
- Goo, B. C. and Seo, J. W., 2003, 'Probabilistic Fatigue Life Evaluation of Rolling Stock Structures,' Transactions of KSAE, Vol. 11, No. 5, pp. 89-94
- Badano, A. and Flynn, M. J., 1998, 'Monte Carlo Modeling of Glare in CRTs for Medical Imaging,' Society for Information Display, Vol. 29, pp. 495-504 https://doi.org/10.1889/1.1833801
- Go, S. G., Go, Y. H. and An, B. J., 2000, 'Representation of Data,' Statistical Quality Control, Part 2, pp. 14-17
Cited by
- Design of Pretreatment Process of Lead Frame Etching Wastes Using Reduction-Oxidation Method vol.27, pp.1, 2016, https://doi.org/10.14478/ace.2015.1087