DOI QR코드

DOI QR Code

CFD 기반의 비선형 초탄성 재료의 구조 설계

The Structural Design for Nonlinear Hyperelastic Materials Based on CFD

  • 발행 : 2006.04.01

초록

The hyper-elastic material has been used gradually and its range was extended all over the industry. The performance prediction of hyper-elastic material was required not only experimental methods but also numerical methods. In this study, we presented the process how to use numerical method for hyper-elastic material and applied it to seat-ring of butterfly valve. The finite element analysis was executed to evaluate the mechanical characteristics of hyper-elastic material. And the optimum model considered conditions and features. According to that model, the load conditions were obtained by using CFD analysis.

키워드

참고문헌

  1. Antoun, N., Jankvoich E. and Estebent, T., 1994. 'Applications of Major FEM Code to the Stress Analysis of Rubber Parts,' Stuttgart
  2. Shoup, T. E. and Fegan, G. R., 1993, 'Computer Assisted Design of Rubber Shear Springs,' Computers Engineering, ASME
  3. Moreau, C., Thuillier, S., Rio, G. and Grolleau, V., 1998, 'The Mechanical of a Slightly Compressible Rubber-Like Material: Correlation of Simulations and Experiments,' Rubber Chmistry and Technology, Vol, 72, pp. 269-282
  4. Kim, H.Y., Choi, C., Bang, W.J and Kim, J.S., 1993, 'Large Deformation Finite Element Analysis for Automotive Rubber Components,' Trans, of KSAE, Vol. 15, No. 1, pp. 107-119
  5. Jone, M.S., Moon, H.K. and Kim, S.J., 1997, 'A Simple Finite Element Method to Determination of Deformed Shape and Load-Displacement Curve of Elstomers,' Trans. of KSME(A), Vol. 21, No. 2, pp. 217-222
  6. Rivlin, R.S., and Saunders, D. W., 1951, 'Large Elastic Deformation of Iostropic Materials - VII. Experiments on the Deformation of Rubber,' Philos, Trans, R. Soc(A), Vol. 243, pp. 251-288 https://doi.org/10.1098/rsta.1951.0004
  7. Ogden, R. W., 1972, 'Large Deformation Isotropic Elasticity: On The Correlation of Theory and Experiment for Incompressible Rubberlike Solids,' Proc. of The Royal Society(A), Vol. 326, pp. 565-584 https://doi.org/10.1098/rspa.1972.0096
  8. Arruda, E. and Boyce, M.C., 1993, 'A Three-Dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials,' J. Mech Phys. Solids, Vol. 41, No. 2, pp. 389-412 https://doi.org/10.1016/0022-5096(93)90013-6
  9. Bradly, G.L., Chang, P.C., Mckenna and G. B., 2001, 'Rubber Modeling Using Uniaxial Test Data,' J. of App, Poly, Sai., Vol. 81, pp. 837-848 https://doi.org/10.1002/app.1503
  10. Miller, K., 2002, 'Structual Testing of Materials for Finite Element Analysis of Elastomeric Parts,' Automotive Elastomers Conference
  11. CFX user guide
  12. Jasbir S. A., 2001, 'Introduction to Optimum Design,' McGraw Hill