DOI QR코드

DOI QR Code

2차원 면에서의 자세 관측시 시야각이 관절각 추정에 미치는 영향

Effects of Viewing Angle on the Estimation of Joint Angles in the 2-dimensional Plane


초록

In assessing risks related to working posture, pictures of postures are taken from various directions, which can be a source of observation error. Joint postures of the neck, lower back, knee, shoulder, and elbow were taken from 7 different viewing angles and 19 observers estimated joint angles by observing the pictures in 2-dimensional display. The joint angles were also measured using an optoelectronic motion measurement system. The estimation error increased as the viewing angle varies from the right side of the human body, but the patterns differ according to which joint angles were being observed. Guidelines to increase the validity of observation of joint angles were presented based on the results. In general, it is recommended to maintain the viewing angle within 20 degrees from the right side of the human body, while different ranges of viewing angle are recommended for each joint angle.

키워드

참고문헌

  1. 기도형, 작업자세 부하 평가를 위한 자세분류 체계의 연구 현황 - 관측법을 중심으로, 산업안전학회지, 15(4), 139-149, 2000
  2. 노동부(Minstry of Labor), 2003, http://www.molab.go.kr
  3. Chaffin, D. B. and Andersson, G. B. J., Martin. B. J., Occupational Biomechanics, 3rd ed., John Wiley & Sons Inc., 1999
  4. Genaidy, A. M., Al-shedi, A. A. and Karwowski, W., Postural stress analysis in industry, Applied Ergonomics, 25(2), 77-87, 1994 https://doi.org/10.1016/0003-6870(94)90068-X
  5. Genaidy, A. M., Simmons, R. J., Guo, L. and Hidalgo, J. A., Can visual perception be used to estimate body part angles?, Ergonomics, 36(4), 323-329, 1993 https://doi.org/10.1080/00140139308967889
  6. Gescheider, G. A., Psychophysics: Method, theory, and application, 2nd ed., Lawrence Erlbaum Associates, Hillsdale, 1985
  7. Hagberg, M., Siverstein, B., Wells, R., Smith, M. J., Hendrick, H. W., Carayon, P., Perusse, M., Kuorinka, I. and Forcier, L.(eds), Workrelated musculoskeletal disorders(WMSDs): A reference book for prevention, Taylor & Francis, 1995
  8. Han, S. H., Song, M. and Kwahk, J., A systematic method for analyzing magnitude estimation data, International Journal of Industrial Ergonomics, 23, 513-524, 1999 https://doi.org/10.1016/S0169-8141(98)00017-1
  9. Keyserling, W. M., Postural analysis of the trunk and shoulders in simulated real time, Ergonomics, 29, 569-583, 1986 https://doi.org/10.1080/00140138608968292
  10. Kilbom, A., Assessment of physical exposure in relation to work-related musculoskeletal disorders - what information can be obtained from systematic observations?, Scandinavian Journal of Work Environment and Health, 20, 30-45, 1994
  11. Korea Occupational Safety and Health Agency (KOSHA), KOSHA NET (http://www.kosha.net/), 2005
  12. Lee, I., Psychophysical evaluation of whole-body postural stresses based on discomfort for body joint motions, Ph.D. Dissertation, Pohang University of Science and Technology, Korea, 2002
  13. Paul and Douwes, Two-dimensional photographic posture recording and description: a validity study, Applied Ergonomics, 24(2), 83-90, 1993 https://doi.org/10.1016/0003-6870(93)90079-O
  14. Putz-Anderson, V. (Ed.), Cumulative trauma disorders: A manual for musculoskeletal diseases of the upper limbs, Taylor & Francis, 1988
  15. Size Korea, 2005, http://sizekorea.ats.go.kr
  16. Stetson, D. S., Keyserling, W. M., Silverstein, B. A. and Lonard, J. A., Observational analysis of the hand and wrist: a pilot study, Applied Occupational Environmental Hygiene, 6(11), 927-937, 1991 https://doi.org/10.1080/1047322X.1991.10387994
  17. World Health Organization (WHO), Health and environment in sustainable development: Five years after the earth summit, Geneva: WHO, 1997

피인용 문헌

  1. A Study for the Appropriateness of the Different Reference Points in the Analysis of Working Posture vol.30, pp.5, 2011, https://doi.org/10.5143/JESK.2011.30.5.637