초록
현대의 고성능 전투기에 탑재되어 있는 전기식 비행제어계통(Digital Fly-By-Wire Flight Control System)은 항공기 조종면의 고장으로 인해 발생할 수 있는 항공기의 안정성을 보장하기 위해 조종면 형상 재구성 모드(Control Surface Reconfiguration Mode)가 설계되어 있다. T-50 제어법칙에는 단일 조종면이 고장 났을 경우, 정상작동중인 나머지 조종면을 이용하여 항공기를 원활히 조종할 수 있도록 형상 재구성 모드가 적용되어 있다. 본 논문에서는 항공기 운용 시 발생할 수 있는 조종면 결함으로 인해 형상 재구성 모드 제어법칙이 적용되었을 경우, 착륙외장형상에서 항공기 안정성을 해석하기 위하여 선형해석(Linear Analysis)을 수행하였다 그리고 착륙에 대한 비행성(Flying Quality) 저하여부를 판단하기 위해, HQS(Handling Quality Simulator)를 이용하여 조종사 시뮬레이션을 수행하였다. 해석결과, 조종면 고장으로 인해 제어법칙이 형상 재구성 모드로 전환될 경우, 항공기의 조종성 및 비행성의 저하가 다소 발생하였지만, HQS 조종사 시뮬레이션 결과 착륙과정에서는 비행성 요구도인 Level 1을 만족할 수 있었다.
Modern versions of supersonic jet fighter aircraft using a digital flight-by-wire flight control system design utilizes a control surface reconfiguration in order to guarantee the aircraft flight stability when a control surface is failed. The T-50 flight control laws are designed such that the surface reconfiguration mode controls the aircraft using non-failed control surfaces when one of the control surfaces is failed. In this paper, linear analysis and HQS(Handling Quality Simulator) pilot simulations are performed to analyze the flight stability and handling quality when the surface reconfiguration mode is engaged for aircraft landing configuration. It is found that the aircraft flight stability and handling quality is satisfied to level 1 requirements when the T-50 flight control law is changed to the surface reconfiguration mode.