초록
노즐 조립체에 대한 구조건전성을 평가하기 위한 구조강도시험에 음향방출 기법을 적용하였다. 이들 결과는 스트레인 및 변위 측정 결과와 비교 분석 되었으며, AE 기법의 신뢰도를 향상시키기 위하여 X-ray를 이용한 NDT 기법이 각 시험 전과 후에 실시되었다. 노즐 조립체에 대한 구조건전성 평가 시험에서 스트레인 및 변위 결과로는 구조물의 국부적인 균열 생성 현상을 정확하게 규명하기 곤란하였으나, AE 기법을 이용함으로써 균열들의 생성위치 및 하중을 정확하게 평가할 수 있었다. 이 시험을 통하여, 사출판과 노즐 조립체 사이에 존재한 간섭현상으로 인한 예기치 않은 하중에서 노즐 조립체의 복합재 내에 새로운 균열이 생성될 수 있음이 확인되었으며, 이들 균열은 구조물의 급격한 기능 상실의 원인이 될 수 있는 것으로 파악되었다.
An acoustic emission technique was applied to the structural strength test for the structural integrity evaluation of the nozzle assembly. These AE results were compared with data from the strain gages and displacement transducer. NDT using X-ray technique was performed to improve the test reliability before and after each test. In this structural integrity evaluation of the nozzle assembly, the internal crack initiation in the structure could not be precisely revealed by the strain and displacement results but the location and load level of the initiated crack could be precisely evaluated by using AE technique. From this test, it was proven that some new cracks can be generated in composite liner of nozzle assembly under the unexpected load due to interference between obturator and nozzle and these can be a cause of the unexpected abnormal failure.