Micro Bonding Using Hot Melt Adhesives

  • Bohm, Stefan (Institute of Joining and Welding, Technical University Braunschweig) ;
  • Hemken, Gregor (Institute of Joining and Welding, Technical University Braunschweig) ;
  • Stammen, Elisabeth (Institute of Joining and Welding, Technical University Braunschweig) ;
  • Dilger, Klaus (Institute of Joining and Welding, Technical University Braunschweig)
  • Received : 2006.11.03
  • Accepted : 2006.11.29
  • Published : 2006.12.30

Abstract

Due to the miniaturization of MEMS and microelectronics the joining techniques also have to be adjusted. The dosing technology with viscous adhesives does not permit reproducible adhesive volumes, which are clearly under a nano-liter. A nano-liter means however a diameter of bonding area within the range of several 100 micrometers. Additional, viscous adhesives need a certain time, until they are cross linked or cured. The problem especially in the MEMS is the initial strength, since it gives the time, which is needed for joining an individual adhesive joint. The time up to the initial strength is with viscous, also with fast curing systems, within the range of seconds until minutes. Until the reach of the initial strength, the micro part must be fixed/held. Without sufficient adjustment/clamping it can come to a shift of the micro parts. Also existing micro adhesive bonding processes are not batch able, i.e. the individual adhesive joints of a micro system must be processed successively. In the context of the WCARP III 2006 now an innovative method is to be presented, how it is possible to solve the existing problems with micro bonding. i.e. a method is presented, which is batch able, possess a minimum joining geometry with some micrometers and is so fast that no problems with the initial strength arise. It is a method, which could revolutionize the sticking technology in the micro system engineering.

Keywords