대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제43권1호
  • /
  • Pages.75-86
  • /
  • 2006
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

소형 요트의 기본 구조 설계 및 구조 해석 기법에 대한 연구

A Study on the Structural Design and Structural Analysis for Small Yacht

  • 신종계 (서울대학교 조선해양공학과, 해양시스템 공학연구소) ;
  • 이재열 ((주)지노스) ;
  • 이장현 (인하대학교 기계공학부) ;
  • 반석호 (한국해양연구원 해양시스템 안전연구소) ;
  • 이상홍 ((주)어드밴스드마린테크) ;
  • 유재훈 (한국해양연구원 해양시스템 안전연구소)
  • Shin, Jong-Gye (Department of Naval Architecture and Ocean Engineering, Rearch Institute of Marine Systems Engineering, Seoul National University) ;
  • Lee, Jae-Yeol (XINNOS Co., Ltd) ;
  • Lee, Jang-Hyun (School of Mechanical Engineering, Inha University) ;
  • Van, Suak-Ho (Korea Ocean Research & Development Institute) ;
  • Lee, Sang-Hong (AMTEC Co., Ltd.) ;
  • Yoo, Jae-Hoon (Korea Ocean Research & Development Institute)
  • 발행 : 2006.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The scantling and structural design work is done during the initial stage in yacht design. This paper studies a procedure of the structural design for yacht with an illustrative design. Scantling of structural members and loads are defined based on the rules suggested by ISO(International Standard Organization) and ABS(American Bureau of Shipping). Also, FEA(Finite Element Analysis) model is presented for a practical guide for structural analysis. An equivalent structural element is used to simplify the composite material for the analysis.

키워드

참고문헌

  1. 유재훈, 반석호, 안해성, 김진, 김상현, 2005, '30 피트급 요트의 선형개발 및 성능추정,' 대한조선학회 논문집, 제 42권, 제 1호, pp. 34-42 https://doi.org/10.3744/SNAK.2005.42.1.034
  2. 장창두, 김호경, 1998, '복합재료 쌍동형 초고석선의 최적 구조 설계 -최소 중량 설계,' 대한조선학회 논문집, 제 35권, 제 2호, pp. 94-103
  3. 천승현, 전호환, 하문근, M. Nakato, 1999, '바람과 파랑충격을 고려한 소형경주정의 안전성 해석,' 대한조선학회 논문집, 제 36권, 제 1호, pp. 1-14
  4. ABS, 1994, Guide for Building and Classing Offshore Racing Yachts, American Bureau of Shipping, New York
  5. Lars Larsson and Rolf E. Eliasson, 2000, 'Principles of Yacht Design,' 2nd ed. International Marine of McGraw-Hill, Camden Marine
  6. Ojeda R.B., Prusty G., Salas M., 2004, 'Finite element investigation on the static response of a composite catamaran under slamming loads,' Ocean Engineering, Vol. 31, pp. 901-929 https://doi.org/10.1016/j.oceaneng.2003.08.008

피인용 문헌

  1. Structural Strength Assessment and Optimization for 20 Feet Class Power Boat vol.53, pp.2, 2016, https://doi.org/10.3744/SNAK.2016.53.2.108
  2. Research on Arrangement Design for Sailing Yacht Winch using 3D Human Simulation vol.31, pp.6, 2017, https://doi.org/10.26748/KSOE.2017.12.31.6.419
  3. Evaluation of Structural Integrity of the ISO-based Moon Pool Type Diver Boats vol.24, pp.5, 2018, https://doi.org/10.7837/kosomes.2018.24.5.597