ACTIVATED CARBON CANISTER PERFORMANCE FOR A SPARK IGNITION ENGINE

  • CHOI G. H. (Department of Mechanical & Automotive Engineering, Keimyung University) ;
  • CHOI K. S. (Department of Automotive Engineering, Daegue Mirae College) ;
  • CHUNG Y. J. (Department of Automotive Engineering, Daegue Mirae College) ;
  • KIM I. M. (Department of Mechanical Design, Myongji College) ;
  • DIBBLE R. W. (Department of Mechanical Engineering, University of California at Berkeley) ;
  • HAN S. B. (Department of Mechanical Engineering, Induk Institute of Technology)
  • Published : 2006.02.01

Abstract

Prediction of the performance of a carbon canister in vehicle evaporative emission control system has become an important aspect of overall fuel system development and design. A vehicle's evaporative emission control system is continuously working, even when the vehicle is not running, due to generation of vapors from the fuel tank during ambient temperature variations. Evaporative emissions from gasoline powered vehicles continue to be a major concern. The objective of this paper is to clarity the flow characteristics and other such fundamental data for the canister during loading and purging are needed, and this data will prove valuable in the development of the canister. This paper is to evaluate the relationship between carbon canister condition and engine performance during engine operation, and the effects of evaporative emissions on the engine performance were investigated.

Keywords

References

  1. Choi, G. H., Han, S. B. and Dibble, R. W. (2004). Experimental study on homogeneous charge compression ignition engine operation with exhaust gas recirculation. Int. J. Automotive Technology 5, 3, 195-200
  2. Grieve, M. J. and Himes, E. G. (2000). Advanced canister purge algorithm with a virtual HC sensor. SAE Paper No. 2000-01-0557
  3. Haskew, H. M. and Liberty, T. F. (1999). Diurnal emissions from in-use vehicle. SAE Paper No. 1999-01-1463
  4. Haskew, H. M., Eng, K. D. and Liberty, T. F. (1999). Running loss emission from in-use vehicle. SAE Paper No. 1999-01-1464
  5. Lavoie, G. A., Johnson, P. J. and Hood, J. F. (1996). Carbon canister modeling for evaporative emission: Adsorption and thermal effects. SAE Paper No. 961210
  6. Lyons, J. M., Lee, J. M., Heirigs, P. L., McClement, D. and Welstand, S. (2000). Evaporative emissions from late-model in-use vehicles. SAE Paper No. 2000-01-2958
  7. Matsushima, H., Iwamoto, A., Ogawa, M., Satoh, T. and Ozaki, K. (2001). Development of a gasoline-fueled vehicle with zero evaporative emissions. SAE Paper No. 2001-01-2926
  8. Yang, J., Culp, T. and Kenney, T. (2002). Development of a gasoline engine system using HCCI technology - the concept and the test results. SAE Paper No. 2002-01-2832
  9. Yoo, I. K., Upadhyay, D. and Rizzoni, G. (1999). A control-oriented carbon canister model. SAE Paper No. 1999-01-1103