DOI QR코드

DOI QR Code

Workspace and Force-Moment Transmission of a Parallel Manipulator with Variable Platform

가변형 병렬기구에 대한 작업공간과 힘/모멘트 전달 특성 해석

  • 김병창 (경남대학교 기계자동화공학부) ;
  • 이세한 (경남대학교 기계자동화공학부)
  • Published : 2006.02.01

Abstract

Kinematic and dynamic characteristics of a Stewart platform based parallel manipulators are fixed once they are constructed. Thus parallel manipulators with various configurations are required to meet a variety of applications. In this research a parallel manipulator with variable platform (PMVP) has been developed, in which the length of the arm linking the platform center to the platform-leg contact point can be varied by an actuator. The workspace of the PMVP is larger than that of a traditional Stewart platform and especially the range in which the maximum orientation angles can be maintained is significantly expanded. Furthermore, the characteristics of force and moment transmission between the legs and platform can be adjusted to meet the requirements of various tasks. Kinematic and dynamics analysis was performed to verify the usefulness of the PMVP and the actual hardware was built to demonstrate the feasibility.

Keywords

References

  1. D. Stewart 'A platform with six degrees of freedom,' Proc. of Inst. Mech. Engr., vol. 180, no. 1, pp. 371-386, 1965 https://doi.org/10.1243/PIME_PROC_1965_180_029_02
  2. K. Nakashima, etc., 'Development of the parallel manipulator,' Robotics, Mechatronics and Manufacturing systems, Elsevier Science Pub., pp. 27-32.,1993
  3. N. Mimura, Y Funahashi, 'A new analytical system applying 6 DOF parallel link manipulator for evaluating motion sensation,' Proc. of ICRA 1995, pp. 227-233, 1995 https://doi.org/10.1109/ROBOT.1995.525290
  4. K. Liu, J. M. Fitzgerald, F. L. Lewis, 'Kinematic analysis of a Stewart platform manipulator,' IEEE transaction on Industrial Electronics, vol. 40, no. 2, pp. 282-293, 1993 https://doi.org/10.1109/41.222651
  5. D-M Ku, 'Direct displacement analysis of a Stewart platform mechanism,' Mechanism and Machine Theory, vol. 34, pp. 453-465,1999 https://doi.org/10.1016/S0094-114X(98)00043-3
  6. G. Lebret, K. Liu, F. L. Lewis, 'Dynamic analysis and control of Stewart platform manipulator,' Journal of Robotic Systems, vol. 10, no. 5, pp. 629-655, 1993 https://doi.org/10.1142/9789812702289_0002
  7. B. Dasgupta, T. S. Mruthyuniaya, 'Closed-form dynamic equations of the general Stewart platform through the Newton-Euler approach,' Mechanism and Machine Theory, vol. 33, no. 7, pp. 993-1012, 1998 https://doi.org/10.1016/S0094-114X(97)00087-6
  8. C.-D. Zhang, S. M. Song, 'An efficient method for inverse dynamics of manipulators based on the virtual work principle,' Journal of Robotic Systems, vol. 10, no. 5, pp. 605-627, 1993 https://doi.org/10.1002/rob.4620100505
  9. F. Pierrot, A. Fournier, P. Dauchez, 'Towards a fully parallel 6dof robot for high speed applications,' Proc. of ICRA, 1991, pp. 1288-1293, 1991 https://doi.org/10.1109/ROBOT.1991.131789
  10. M. Honegger, A. Codourey, E. Burdet, 'Adaptive control of the Hexaglide, a 6-dof parallel manipulator,' Proc. of ICRA 1997, pp. 543-548, 1997 https://doi.org/10.1109/ROBOT.1997.620093
  11. K. J. Waldron, M. Raghavan, B. Roth, 'Kinematics of a hybrid series-parallel manipulation system,' ASME Journal of Dynamic Systems, Measurement, and Control, vol. 111, pp. 211-221, 1989 https://doi.org/10.1115/1.3153039
  12. M. K. Lee, 'Design of a high stiffniss machining robot arm using double parallel mechanisms,' Proc. of ICRA, pp. 234-240, 1995 https://doi.org/10.1109/ROBOT.1995.525291
  13. T. Ami, K. Cleary, T. Nakamura, H. Adachi, K. Homma, 'Design, analysis and construction of a prototype parallel link manipulator,' Proc. of IROS 1990, pp. 205-212, 1990 https://doi.org/10.1109/IROS.1990.262388
  14. R. S. Stoughton, T. Ami, 'A modified Stewart platform manipulator with improved dexterity,' IEEE Transactions on Robotics and Automation, vol. 9, no. 2, pp. 166-173, 1993 https://doi.org/10.1109/70.238280
  15. M. Raghavan, 'The stewart platform of general geometry has 40 configurations,' Journal of Mechanical Design, pp. 277-280, 1993
  16. E.-M. Dafaoui, Y Amirat, J. Pontnau, C. Francois, 'Analysis and design of a six-dof parallel manipulator; modeling, singular configurations and workspace, IEEE transactions on Robotics and Automation, vol. 14, no. 1 , pp.78-92, 1998 https://doi.org/10.1109/70.660846
  17. J. J. Craig, Introduction to Robotics Mechanics and Control, 2nd Ed., Addison-Wesley, 1989