Time-optimal Trajectory Planning for a Robot System under Torque and Impulse Constraints

  • Cho, Bang-Hyun (Daewoo Shipbuilding & Marine Engineering Co., Ltd.) ;
  • Choi, Byoung-Suk (School of Electronics Engineering, Pusan National University) ;
  • Lee, Jang-Myung (School of Electronics Engineering, Pusan National University)
  • Published : 2006.02.01

Abstract

In this paper, moving a fragile object from an initial point to a specific location in the minimum time without damage is studied. In order to achieve this goal, initially, the maximum acceleration and velocity ranges are specified. These ranges can be dynamically generate on the planned path by the manipulator. The path can be altered by considering the geometrical constraints. Later, considering the impulsive force constraint on the object, the range of maximum acceleration and velocity are obtained to preserve object safety while the manipulator is carrying it along the curved path. Finally, a time-optimal trajectory is planned within the maximum allowable range of acceleration and velocity. This time-optimal trajectory planning can be applied to real applications and is suitable for both continuous and discrete paths.

Keywords

References

  1. K. G. Shin and N. D. McKay, 'Minimum-time control of robotic manipulators with geometric path constraints,' IEEE Trans. on Automatic Control, vol. 30, no. 6, pp. 531-541, June 1985 https://doi.org/10.1109/TAC.1985.1104009
  2. K. G. Shin and N. D. Mckay, 'A dynamic programming approach to trajectory planning of robotic manipulators,' IEEE Trans. on Automatic Control, vol. 31, no. 6, pp. 491-500, June 1986 https://doi.org/10.1109/TAC.1986.1104317
  3. J. E. Bobrow, S. Dubowsky, and J. S. Gibson, 'Time-optimal control of robotic manipulators along specified paths,' Int. J. Robotics Res., vol. 4, no. 3, pp. 3-17, 1985
  4. J. E. Slotine, 'Improving the efficiency of timeoptimal path-following algorithms,' IEEE Trans. on Robotics and Automation, vol. 5, no. 1, pp. 118-124, February 1989 https://doi.org/10.1109/70.88024
  5. Z. Shiller, 'On singular time-optimal control along specified paths,' IEEE Trans. on Robotics and Automation, vol. 10, no. 4, pp. 561-566, August 1994 https://doi.org/10.1109/70.313107
  6. S. B. Moon and S. Ahmad, 'Time-optimal trajectories for cooperative multi-manipulator systems,' IEEE Trans. Syst. Man and Cybernetics, vol. 27 no. 2, April 1997
  7. A. Klein and C. H. Huang, 'Review of pseudoinverse control for use with kinematically redundant manipulators,' IEEE Trans. Syst., Man, Cybern., vol. SMC-13, pp. 245-250, 1983 https://doi.org/10.1109/TSMC.1983.6313123
  8. G. S. Chirikjian and J. W. Burdick, 'A modal approach to hyper-redundant manipulator kinematics,' IEEE Trans. Robot. Automat., vol. 10, pp. 343-354, June 1994 https://doi.org/10.1109/70.294209
  9. S. Ma and S. Hirose, 'Development of a hyperredundant multijoint manipulator for maintenance of nuclear reactor,' Int. J. Advanced Robot., vol. 9, no. 6, pp. 281-300, 1995
  10. B . K. Choi and D. W. Kim, 'Bounded deviation joint path algorithms for piecewise cubic polynomial trajectories,' IEEE Trans. Syst., Man, Cybern, vol. 20, no. 3, pp. 725-733, May 1990 https://doi.org/10.1109/21.57288
  11. C.-H. Wang and J.-G. Horng, 'Constrained minimum-time path planning for robot manipulators via virtual knots of the cubic Bspline functions,' IEEE Trans. on Automatic Control, vol. 35, no. 5, pp. 573-577, May 1990 https://doi.org/10.1109/9.53526