초록
위상 배열 초음파 기법을 이용한 국내 표준형 윈전 저압 터빈의 디스크 검사에 대하여 연구하였다. 이를 위하여 디스크 mockup을 제작하고 결함을 가공하였으며 결함에 대한 검출과 길이 측정 방법에 따른 결과를 고찰하였다. 깊이 측정에서 릴은 결함은 AATT(absolute arrival time technique)방법 혹은 RATT (relative arrival time technique)방법을 사용하여 깊이를 측정할 수 있었으나, 조기에 발견하여야 할 깊이가 깊지 않은 결함은 이와 같은 방법으로 깊이를 측정할 수 없었다. 이 경우 결함 신호가 나타나는 각도 범위를 이용하여 결함 깊이를 측정하였으며 유용한 도구임을 확인하였다.
Nondestructive examination for low pressure turbine disc in standard nuclear power plant using phased array technique was studied. For this purpose, disc mockups were made and notches were machined in the mockups. Detection and length sizing by different methods are compared. Depth of deep notches could be measured by using AATT(absolute arrival time technique) or RATT(relative arrival time technique) but shallow notches that must be detected in early stage couldn't be measured by these two methods. For this case, notch depth was estimated by using signal response angle range and preyed usefulness.