A Proposal on the Stress-Strain Curve of Stainless Steel STS 304

STS 304 스테인리스강의 응력도-변형도 곡선에 관한 제안

  • 신태송 (동명대학교 건축공학과)
  • Received : 2005.05.27
  • Accepted : 2006.03.03
  • Published : 2006.04.27

Abstract

This paper is to investigate into the stress-strain curves for austenite stainless steel STS 304 over the full strain range. The Ramberg-Osgood expression is useful up to the beyond the0.2% proof stress in the ultimate state. The Rasmussen curve has developed for stresses beyond 0.2% proof stress, based on the Ramberg-Osgood concept. These expressed curves don't good agree with the test results. It is here proposed the based on the analysis of the test results better curve.

오스트나이트계 STS 304 스테인리스강의 응력도-변형도 곡선을 전 영역에 걸쳐 연구하는 것을 본 논문의 목적으로 한다. 실험적, 이론적 연구를 통하여 비교분석하였고, 개선된 곡선을 제안한다. 0.2% 강도까지 Ramberg-Osgood 곡선은 유용하지만, 이 영역을 초과하는 한계상태의 경우 그것은 원칙적으로 일치하지 않는다. Rasmussen 곡선은 Ramberg-Osgood 곡선의 원리에 기초하여 0.2% 강도를 초과하는 영역에 대하여 개발되었다. 실험과 비교한 결과 잘 일치하지 않기 때문에 실험결과를 분석하여 개선된 식을 제안하며 응력도-변형도 관계를 전 영역에 걸쳐 비교 평가한다.

Keywords

References

  1. 장호주, 양영성(2005) 중심압축하중을 받는 스테인리스강관기둥의 좌굴내력에 관한 연구, 한국강구조학회 논문집, 제17권 2호
  2. Ramberg W, Osgood WR (1941) Determinations of stress-strain curves by three parameters, Technicak note no. 503, National Advisory Committee on Aeronautics (NACA)
  3. ANSI/ASCE-8-90 (1991) Specification for the Design of Cold-Formed Stainless Steel Structural Members
  4. ENV 1993-1-3, Eurocode 3 (1996) Design of Steel Structures; Part 1.4 : General Rules-Supplementary Rules for Stainless Steel
  5. MacDonald M, Rhodes J, Taylor GT (2000) Mechanical properties of stainless steel lipped channels, In Laboube RA, Yu W-W, editors, Proceedings, 15th International Specialty Conference on Cold-formed Steel Structures, University of Missouri-Rolla
  6. Kim J.R. Rasmussen (2003) Full-range stress-strain curves for stainless steel alloys, Journal of Constructional Steel Research 59, 47-61 https://doi.org/10.1016/S0143-974X(02)00018-4