초록
구조재의 잔류응력(residual stress)은 외부에서 하중이 작용하지 않는 상태에서도 구조물 내부에 존재하는 응력으로 건설현장에서 구조물을 설치, 조립하는 경우에 발생하게 되며 특히 용접이나 과부하에 의한 구조물의 설치 후에도 발생할 수 있다. 이에 본 연구에서는 600MPa급 mega structure용 강관제작 상의 프레스 및 용접에 의한 잔류응력의 영향을 파악하고자 홀드릴링 변형게이지법(Hole-Drilling Strain Gage Method)을 이용하여 용접선 부근을 중심으로 총 59개소를 측정하여 잔류응력의 분포 및 크기를 평가하였다.
Residual stresses in structural materials are stresses that exist in the objective without the application of any service or other external loads. Manufacturing processes are the most common causes of residual stress. To examine the effect and the distribution of residual stress due to press forming and welding in the production of a 600MPa-class steel tube, a residual stress evaluation test was performed. The measurement used the Hole-Drilling Strain Gauge Method and evaluated the distribution of residual stress, which measured a total of 59 places near the welding line.