초록
강박스거더에 편심이 작용하면 단면은 뒤틀리고, 이로 인해서 종방향으로 뒤틀림 응력이 발생한다. 휨모멘트에 의한 휨응력 이외에뒤틀림으로 인한 추가되는 종방향 응력은 경우에 따라서는 무시할 수 없이 크기 때문에 설계단계에서 반드시 고려되어야 한다. 일반적으로 중간다이아프램을 설치하여 뒤틀림 변형 자체를 억제시켜 뒤틀림응력의 크기를 제안하는 방법을 이용하는데, 이때 휨응력에 비교하여 뒤틀림응력의 크기를 통상 5~10%정도로 제한한다. 현재 적용하는 중간다이아프램 설치간격에 대한 공식은 고전적인 BEF 이론을 바탕으로 유도되었는데, 이는지나치게 보수적인 설계를 유도하고있다. 이에 본 연구에서 강박스거더의 프레임형식 중간다이아프램에 대해 3차원 유한요소해석을 수행하여 분석한 결과, 현행 중간다이아프램 단면적 공식은 지나치게 큰 값을 요구하는 것으로 나타났다. 그래서 유한요소 해석결과를 회귀분석하여 설계 초기에 적용할 수 있는 개선된 프레임형식의 중간다이아프램 단면적 설계공식을 제안하였다.
Cross-sectional distortions take place when steel box girders a re subjected to torsional moment, as a consequence of which distortional warping stresses are necessarily developed. Additional normal stresses due to the distortion are should be included at the design stage. The relative magnitude with respect to the maximum bending stress are kept less than the specific values, i.e., at 5~10%, by properly spaced intermediate diaphragms that could prevent the distortional deformation of the box girder. However, current design equations for the stiffness of intermediate diaphragms were derived based on BEF. In this study, the area required by the intermediate diaphragm members are investigated through three-dimensional finite element analyses. The results of the analyses indicate that the current equations give to conservative values for the intermediate diaphragm of box girder bridges. Finally, an improved equation for the area of the intermediate diaphragm is derived from a regression analysis from the finite element analysis results.