참고문헌
- Adell R, Lekholm U, Rockler B, Branemark PI, Lindhe J, Eriksson B, Sbordone L. Marginal tissue reactions at osseointegrated titanium fixtures(1). A 3-year longitudinal prospective study. Int J Oral Maxillofac Surg. 1986; 15: 39-52 https://doi.org/10.1016/S0300-9785(86)80010-2
- Balfour A, O'Brien GR. Comparative study of antirotational single tooth abutments. J Prosthet Dent 1995; 73:36-43 https://doi.org/10.1016/S0022-3913(05)80270-7
- Barbier L, Vander SJ , Krzesinski G, Shepers E, Van Der Perre G. Finite element analysis of non axial vs. axial loading of oral implants in the mandible of dog. J Oral Rehabil 1998;25:847-858 https://doi.org/10.1046/j.1365-2842.1998.00318.x
- Beat R. Mechanics of the implant-abutment connection. An 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000; 15: 519-526
- Bozkaya D, Muftu S, Muftu A. Evaluation of load transfer characte- ristics of five implant in compact bone at different load levels by finite element analysis. J Prosthet Dent 2004; 92:523-530 https://doi.org/10.1016/j.prosdent.2004.07.024
- Brunski JB, Puleo DA, Nanci A. Biomaterials and biomechanics of oral and maxillofacial implants: current status and future developments. Int J Oral Maxillofac Implants 2000; 15: 15-46
- Chung KM, Chung CH, Jeong SM. Finite element analysis of implant prostheis according to platform width of fixture. J Korean Acad Prosthodont 2003;41:674-688
- Clelland, N.L., Lee, J.K., Bimbenet, O.C., Gilat, A.. Use of an axisym- metric finite element method to compare maxillary bone variables for a loaded implant. J Prosthodont 1993; 2:183-189 https://doi.org/10.1111/j.1532-849X.1993.tb00405.x
- Duyck J, Ronold HJ, Van Oosterwyck H, Naert I, Vander Sioten J, Ellingsen JE. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clin Oral Implants Res 2001;12:207-218 https://doi.org/10.1034/j.1600-0501.2001.012003207.x
- Hansson S. The implant neck: smooth or provided with retention elements. Clin Oral Imp Rec 1999;10:394-405 https://doi.org/10.1034/j.1600-0501.1999.100506.x
- Haraldson T, Zarb GA. A 10-year follow-up study of the masticatory system after treatment with osseointegrated implant bridges. Scand J Dent Rec 1988; 96:243-252
- Holmes DC, Grigsby WR, Goel VK, Keller JC Comparison of stress transmission in the IMZ implant system with polyoxymethylene or titanium intramobile element: A finite element stress analysis. Int J Oral Maxillofac Implants 1992; 7:450-458
- Holmgren EP, Seckinger RJ, Kilgren LM, Mante F. Evaluating parameters of osseointegrated dental implants using ftnite element analysis-a two-dimentional comparative study examining the effects of implant diameter, implant shape, and load direction. J Oral Implantol 1998; 24:80-88 https://doi.org/10.1563/1548-1336(1998)024<0080:EPOODI>2.3.CO;2
- Im TW, Cho IH, Lim JH, Lim HS. Fatigue strength of dental implants with different types of connection between ftxture and abutment cylinder. J Korean Acad Stomatog Function & Occlu 2002; 18:1-19
- Jemt T, et al. Osseointegrated implants for single tooth replacement. A 1-year report from a multicenter prospective study. Int J Oral Maxillofac Implants 1991; 6:29-36
- Kim NH, Chung CH, Son MK, Back DH. A study on the ftt of the implant- abutment-screw interface. J Korean Acad Prosthodont 2003; 41:503-518
- Kitamura E, Stegaroiu R, Nomura S, Miyakawa O. Biomechanical aspects of marginal bone resorption around osseointegrated implants: considerations based on a three-dimentional finite element analysis. Clin Oral Implants Res 2004; 15:401-412 https://doi.org/10.1111/j.1600-0501.2004.01022.x
- Levine RA, et al. A multicenter retrospective analysis of ITI implant system used for single-tooth replacements: Preliminary results at six or more months of loading. Int J Oral Maxillofacial Implants 1997; 12: 237-242
- Lum LB. A biomechanical rationale for the use of short implants. J. Oral Implantol 1991; 17:126-131
- Lum LB, Osier JF. Load transfer from endosteal implants to supporting bone: An analysis using statics. Part one: Horizontal loading. J Oral Implantol 1992; 18:343-348
- Matsushita Y, Kithoh M, Mizuta K, Ikeda H, Suetsugu T. Two- dimentional FEM analysis of hydroxyapatite implants: diameter effects on stress distribution. J Oral Implantol 1990; 16:6-11
- Misch CE, Bidez MW. A scientific rationale for dental implant design. In:Misch CE, editor. Contemporary implant dentistry. 2nd ed. St. Louis.Mosby; 1999. p. 329-343
- Morimoto K, Kihara A, Takeshita F, Suetsugu T. An experimental study on the tissue compatibility of the titanium blade-vent implant coated with HAP-alumina in the semi-functional state. J Oral Implantol 1987; 13:387-401
- Norton MR. An in vitro evaluation of the strength of an internal conical interface compared to a butt joint interface in implant design. Clin Oral Implants Res 1997; 8:290-298 https://doi.org/10.1034/j.1600-0501.1997.080407.x
- Norton MR. Assessment of cold welding properties of internal conical interface two commercially available implant system. J Prosthet Dent 1999; 81:159-166 https://doi.org/10.1016/S0022-3913(99)70243-X
- Norton M. In vitro evaluation of the strength of the conical implant- to- abutment joint in two commercially available implant systems. J Prosthet Dent 2000; 83:567-571 https://doi.org/10.1016/S0022-3913(00)70016-3
- Patra AK, DePaolo JM, D'Souza KS, DeTolla D, Meenaghan MA. Guidlines for analysis and redesign of dental implants. Implant Dent 1998; 7:355- 368 https://doi.org/10.1097/00008505-199804000-00007
- Rangert B, Jemt T, Jomeus L. Forces and moments on Branemark implants. Int J Oral Maxillofac Implants 1989; 4:241-247
- Rangert B, Krogh PHJ, Langer B, van Roekel NB. Bending overload and implant fracture: A retrospective clinical analysis. Int J Oral Maxillofac Implants 1995; 10:326-334
- Rangert B, Enouard F, Amoux JP, Sarment DP. Load factor control for implants in the posterior partially edentulous segment. Int J Oral Maxillofac Implants 1997; 12:360-370
- Siegele D, Soltesz U. Numerical investigations of the influence of implant shape on stress distribution in the jaw bone. Int J Oral Maxillofac Implant 1989;4:333-340
- Sutter F, et al. The new concept of ITI hollow-cylinder and hollow- screw implants : Part 1. Engineering and design. Int J Oral Maxillofac Implant 1988; 3:161-172
- Sutter F, Webber HP, Sorensen J, Belser U. The new restorative concept of the ITI dental implant system: design and engineering. Int J Perodont Rest Dent 1993; 13:409-431
- Weinberg LA. Force distribution in splinted anterior teeth. Oral Surg Oral Moo Oral Pathol 1957;10:484-494, 1957 https://doi.org/10.1016/0030-4220(57)90007-5
- Weinberg LA. Force distribution in splinted posterior teeth. Oral Surg Oral Med Oral Pathol 1957;10:1268-1276 https://doi.org/10.1016/S0030-4220(57)80025-5
- Weinberg LA. The biomechanics of force distribution in implant-supported prostheses. Int J Oral Maxillofac Implants 1993; 8:19-31