VDT 모니터링 작업에서 근골격계 부담도 및 선호도에 근거한 모니터 높이 결정

Determination of Proper Monitor Height based on the Musculoskeletal Load and Preference during VDT Monitoring Tasks

  • 이중호 (대한민국공군 제15 혼성비행단) ;
  • 송영웅 (대구가톨릭대학교 산업보건학과) ;
  • 나석희 (포항공과대학교 산업경영공학과) ;
  • 정민근 (포항공과대학교 산업경영공학과)
  • Lee, Joongho (ROKAF 15th Seoul Air Base) ;
  • Song, Young Woong (Department of Occupational Health, Catholic University of Daegu) ;
  • Na, Seokhee (Department of Industrial and Management Engineering, POSTECH) ;
  • Chung, Min Keun (Department of Industrial and Management Engineering, POSTECH)
  • 발행 : 2006.09.30

초록

Monitor height is one of the key factors in the VDT workstation design. Most of the previous studies have focused on traditional VDT workplace where the operators performed data entry or word processing tasks using single monitor. This study aimed to suggest proper monitor height when the main task was monitoring information from different number of information sources. Twelve male students participated in three experiments: single information source (one monitor), two information sources (one monitor and one CCTV), and three information sources (one monitor, one CCTV and a window). Subjects performed monitoring tasks for 10 minutes with 3 different monitor center heights : 89.0 cm (Low), 111.3 cm (Middle), and 124.8 cm (High). Surface EMG signals of five neck muscles, subjective discomfort ratings, preference, and working postures were recorded. Results indicated that the middle height was proper for one monitor condition, but the low monitor height was recommended for more than two information sources.

키워드

참고문헌

  1. Amell, T. K. and Kumar, S. (1999), Cumulative trauma disorders and keyboarding work, International Journal of Industrial Ergonomics, 25, 69-78 https://doi.org/10.1016/S0169-8141(98)00099-7
  2. Bergqvist, U. O. and Knave, B. G. (1994), Eye discomfort and work with visual display terminals, Scandinavian Journal of Work, Environment and Health, 20, 27-33 https://doi.org/10.5271/sjweh.1432
  3. Burgess-Limerick, R., Plooy, A., Fraser, K., and Ankrum, D. R. (1999), The influence of computer monitor height on head and neck posture, International Journal of Industrial Ergonomics, 23, 171-179 https://doi.org/10.1016/S0169-8141(97)00033-4
  4. Burgess-Limerick, R., Plooy, A., and Ankrum, D. R. (1998), The effect of imposed and self-selected computer monitor height on posture and gaze angle, Clinical Biomechanics, 13, 584-592 https://doi.org/10.1016/S0268-0033(98)00021-7
  5. KRISS, (1997), National Anthropometric Survey of Korea 1997, KRISS-97-114-IR
  6. Knave, B. G., Wibom, R. I., Voss, M., Hedstrom, L. D., and Bergqvist, U. O. (1985), Work with video display terminals among office employees : 1. Subjective symptoms and discomfort, Scandinavian Journal of Work, Environment and Health, 11, 457-466 https://doi.org/10.5271/sjweh.2200
  7. Psihogios.J. P., Sommerich C. M., Mirka, G. A., and Moon, S. D. (2001), A field evaluation of monitor placement effects in VDT users, Applied Ergonomics, 32, 313-325 https://doi.org/10.1016/S0003-6870(01)00014-X
  8. Sauter, S. L., Schleifer, L. M., and Knutson, S. J. (1991), Work posture, workstation design, and musculoskeletal discomfort in a VDT data entry task, Human Factors, 33, 151-167 https://doi.org/10.1177/001872089103300203
  9. Sommerich, C. M., Joines, S. M., and Psihogios, J. P. (2001), Effects of Computer monitor viewing angle and related factor on strain, performance, and preference outcomes, Human Factors, 43, 39-55 https://doi.org/10.1518/001872001775992480
  10. Straker, L. and Mekhora, K. (2000), An evaluation of visual display unit placement by electromyography, posture, discomfort and preference, International Journal of Industrial Ergonomics, 26, 389-398 https://doi.org/10.1016/S0169-8141(00)00014-7
  11. Villanueva, M. B., Sotoyama, M., Jonai, H., Takeuchi, Y., and Saito, S. (1996), Adjustments of posture and viewing parameters of the eye to changes in the screen height of the visual display terminal, Ergonomics, 39, 933-945 https://doi.org/10.1080/00140139608964515
  12. de Wall, M., van Riel, M. P. J. M., Aghina, J. C. F. M., Burdorf, A., and Snijders, C. J. (1992), Improving the sitting posture of CAD/CAM workers by increasing VDU monitor working height, Ergonomics, 35, 427-436 https://doi.org/10.1080/00140139208967823