Abstract
In this study, the experimental bending behaviors of an H-secti on-steel-beam-attached high-strength steel plate or steel beam were analyzed. Its structural performance was verified by comparing the results of the experiment and the analysis that were conducted. In fabricating an unprestressed composite beam using two members that have different strengths, the generated slip on the joint in proport problem because of the redistribution of force caused by the lose state of the joint. Therefore, when fabricating composite beams, it is important to load them with prestressed forces. Based on the results of the experiment that was conducted, the prestressed composite-steel-beam-attached steel plate or beam has a higher bending resistance and load-carrying capacit
본 연구는 H형 압연강재보에 강종이 다른 강재보 또는 강판을 부착하여 프리스트레스를 도입한 강재보의 휨 거동에 대한 실물실험결과를 비교 분석하였다. 또한 이론적인 해석과의 비교를 통하여 구조적인 성능을 검증하였다. 두 개의 부재를 결합하여 합성부재로 만드는데 있어서 결합시 부재간 서로 이완된 느슨한 상태에서 결합이 되기 때문에 하중이 증가함에 따라 부재간에 하중의 재분배가 일어나 그 구조적인 성능을 제대로 발휘하지 못한다. 따라서 두 부재를 합성시킬 때에는 프리스트레스를 가하여 접합해야 한다. 실험결과로부터 강재보에 추가로 강재보 또는 강판을 붙여 프리스트레스가 도입된 강재보는 강성증가와 프리스트레스에 의한 내하력 증가효과가 뚜렷함을 알 수 있었다.