References
- Ghoreishy, M. H. R. and Razavi Nouri, M., 1999, 'Finite Element Analysis of Thermoplastic Melt Flow through the Metering and Die Region of Single Screw Extruders,' Journal of Applied Polymer Science, Vol 74, pp 676-689 https://doi.org/10.1002/(SICI)1097-4628(19991017)74:3<676::AID-APP22>3.0.CO;2-#
- Kajiwara, T., Nagashima, Y., Nakano, Y. and Funatsu, K., 1996, 'Numerical Study of Twin-Screw Extruder by Three-Dimesnional Flow Analysis-Development of Analysis Technique and Evaluation of Mixing Performance for Full flight Screws,' Polymer Engineering and Science, Vol. 36, No. 16, pp 2142-2152 https://doi.org/10.1002/pen.10611
- Jaluria, Y., Karwe, M. V. and Sernas, V., 1996, 'Transport in a Twin-Screw Extruder for the Processing of Polymers,' Polymer Engineerings and Science, Vol.36, No. 11, pp 1531-1540 https://doi.org/10.1002/pen.10548
- Cheng, H. and zloczower, I. M., 1998, 'Distributive Mixing in Conveying Elements of z ZSk-53 Co-rotating Twin Screw Extruder,' Polymer Engineering and Science, Vol.38, No. 6, pp 926-935 https://doi.org/10.1002/pen.10260
- Bravo, V. L. and Hrymark, A. N., 2000, 'Numerical Simulation of Pressure and Velocity Profiles in Kneading Elements of a Co-Rotating Twin Screw Extruder,' Polymer Engineering and Science, Vol.40, No. 2, pp 525-541 https://doi.org/10.1002/pen.11184
- Ishikawa, T., Kihara, S. I. and Funatsu, K., 2000, '3-D Numerical Simulations of Nonisothermal Flow in Co-Rotating Twin Screw Extruders,' Polymer Engineering and Science, Vol. 40, No. 2, 357-364 https://doi.org/10.1002/pen.11169
- Yoshinaga, M., Katsuki, S., Miyazaki, M., Liu, L., Kihara, S. I. and Funatsu, K., 2000, 'Mixing Mechanism of Three-Tip Kneading Block in Twin Screw Extruders,' Polymer Engineering and Science, Vol.40, No. 1, pp 168-178 https://doi.org/10.1002/pen.11150
- Shearer, G. and Tzoganakis, C., 2000, 'The Effects of Kneading Block Design and Operating Conditions of Distributive Mixing in Twin Screw Extruders,' Polymer Engineering and Science, Vol.40, No. 5, pp 1095-1106 https://doi.org/10.1002/pen.11237
- Ishikawa, T. and Amano, T., 2002, 'Flow Pattern and Mixing Mechanisms in the Screw Mixing Element of a Co-Rotating Twin-Screw Extruder,' Polymer Engineering and Science, Vol.42, No. 5, pp 925-939 https://doi.org/10.1002/pen.11002
- Bakalis, S. and Karwe, M. V., 2002, 'Velocity Distributions and Volume Flow Rates in the Nip and Translational Regions of a Co-Rotating, Self-Wiping, Twin-Screw Extruder,' Journal of Food Engineering, Vol. 51, pp 273-282 https://doi.org/10.1016/S0260-8774(01)00068-1
- Bravo, V. L., Hrymak, A. N. and Wricht, J. D., 2004, 'Study of Particel Trahectories Residence Times and Flow Behavior in Kneading Discs of Intermeching Co-Rotating Twin-Screw Extruders,' Polymer Engineering and Science, Vol. 44. No. 4, pp 779-793 https://doi.org/10.1002/pen.20070
- YE, Y. S., Kim, H.B., Kim, N. S. and Lee, J. W., 2005, 'A Study on Analysis of Polymer Extruder Process using Finite Element Method,' KSMTE, Vol. 29, No. 1, pp 145-155 https://doi.org/10.3795/KSME-A.2005.29.1.145
- Linjie, Z., Kwabena, A. N. and Kun, S. H., 2005, 'Investigation of Mixing Mechanisms and Energy Balance in Reactive Extrusion Using Three-Dimensional Numerical Simulation Method,' International Journal of Heat and Mass Transfer, Vol. 48, pp 3411-3422 https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.049