Abstract
Attempts were made to investigate the physiological and genetic changes when two different shiitake (Lentinula edodes) strains are mixed. Mycelial growth of KFRI 180 strain and KFRI 1 strain were investigated 82 mm and 80 mm, respectively. Concerning the weight loss percentage of medium, KFRI 1 strain decreased 2.4% and KFRI 180 strain 1.6%. Plug-shaped spawn had no-problem to incubate and there were no differences among the ratios of mixture. Also, conditions of plug-shaped spawns were similar, When the isolated mycelia from plugshaped spawns was incubated again, KFRI 1 50%-KFRI 180 50% showed decreased growth of mycelia compared with other treatments. The same results were obtained from test tubes filled with sawdust. When surface of spawn bottles were observed, KFRI 1 50%-KFRI 180 50% showed spots, but other treatments were not different from KFRI 1 and KFRI 180. Test was made to confirm the strains by confrontation culture. The mixture of two strains was proved to be KFRI 1 regardless the ratios of mixture. However, by the RAPD primer analysis, when KFRI 1 was mixed with KFRI 180, KFRI 180 was stronger. Thus, the confrontation line on PDA was different from the bands analysis by primers. Attempts were made whether the fruit-bodies were made at the generating condition of spawn bottles. The results were that KFRI 1 100%, KFRI 1 90%-KFRI 180 10%, KFRI 1 80%-KFRI 180 20%, KFRI 1 50%-KFRI 180 50% treatment showed fruit-body formation. The shape of fruit-body was deformed, but the gill was made normally.
서로 다른 두 가지 표고 균주가 혼합되었을 때의 생리 및 유전적 변화에 대한 조사를 시도하였다. 균사생장은 KFRI 180이 82mm, KFRI 1 80mm로 조사되었다. KFRI 1은 2.4% 중량감소가 이루어졌으며, KFRI 180은 1.6% 감소된 것으로 나타났다. 성형종균은 배양 과정 중이나 배양 후에 균사가 뭉쳐서 성형이 유지되는 것에는 전혀 문제가 없었고 이런 현상은 혼입비율 간에도 차이가 없었다. 또한 성형종균의 상태도 서로 간에 구별할 수 없을 정도로 비슷했다. 각 처리구별로 성형종균에서 분리한 균을 PDA에서 재배양했을 때, KFRI 1 50%-KFRI 180 50% 처리구가 다른 처리구들에 비해 생장력이 떨어졌으며, 톱밥배지 시험관에서의 조사에서도 동일한 결과를 얻었다. 각 처리구별로 배양 중인 종균병의 외형을 관찰한 결과, KFRI 1 50%-KFRI 180 50% 처리구 종균에 얼룩 덜룩한 무늬가 형성된 반면에 다른 처리구들은 KFRI 1, 180과 구별될 수 있을 정도의 차이를 보이지 않았다. 대치배양을 통한 균주 확인을 시도한 결과, 두 균주가 섞인 것들은 혼합 비율과 관계없이 모두 KFRI 1 균주와 대치선을 형성하지 않았다. 하지만 RAPD primer를 이용한 분석에서는 KFRI 1과 KFRI 180이 50% 섞였을 경우, KFRI 180의 밴드 유형을 나타냈기 때문에, KFRI 1 50%-KFRI 180 50% 분리균에는 KFRI 180균의 특성이 함께 존재할 것으로 판단된다. 균주가 혼입되었어도 자실체는 발생되는지를 확인하기 위해 종균병들을 표고 발생조건에 노출시킨 결과, KFRI 1 100%, KFRI 1 90%-KFRI 180 10%, KFRI 1 80%-KFRI 180 20%, KFRI 1 50%-KFRI 180 50% 등 4개 처리구에서 자실체가 발생되었으며, 발생된 자실체들은 외형적으로 기형이었으나 주름살은 정상적으로 만들어졌다.